Stainless Steel 316H Pipe Fittings Suppliers

ASTM A403 WP316H Buttweld Pipe Fittings Supplier in India, Manufacturer of Stainless Steel 316H Pipe Fitting, SS 316H Buttweld Fittings Exporter

Stainless Steel 316H Buttweld Fittings Suppliers in India

Metalfed Engineering is a well known manufacturer, supplier and exporter of ASTM A403 WP316H Buttweld Fitting. Our high-quality products and efficient after-sales service have made us a leading entity in this field with a wide range of satisfied consumers in the national and international market. Our products are sold to different countries and regions; the most common ones are UK, Germany, Netherlands, France, Nigeria, Egypt, South Africa, United Arab Emirates, Saudi Arabia, Qatar, Indonesia, Japan, Taiwan, Singapore, Australia, etc.The Stainless Steel 316H Butt Welded Pipe Fittings are austenitic grades of steel that provide higher tensile and yield strength, higher short and long-term creep properties, and heat resistance due to higher carbon content.

The Stainless Steel 316H Pipe Fittings are used in many industries such as natural gas, petrochemical and chemical industries. These ASTM A403 Grade 316H buttweld fittings are known to resist atmospheric corrosion as well as moderate oxidizing and reducing environments. This grade 316h stainless steel pipe fitting is also known for its ability to resist corrosion in polluted marine environments. In addition to this, 316H Stainless Steel Buttweld Fittings are more suitable for applications where high or low temperatures are present due to their high tensile strength and better yield strength.

Recoganized Manufacturer of ASTM A403 WP316H Pipe Elbow, ASTM A403 Grade WP316H Pipe Bends, Reducer, Stub Ends, ASTM A403 Gr WP316H End Caps, Collar, Pipe Nipple in all Dimensions and Sizes.

Table of Content

Stainless Steel 316H Pipe Fittings Specifications
Stainless Steel 316H Pipe Fittings Equivalent Grades
SS 316H Pipe Fittings Chemical Composition
Stainless Steel 316H Pipe Fittings Mechanical Properties
ASTM A403 WP316H Pipe Fittings Size Range
SS 316H Buttweld Pipe Fittings Manufacturing Standards
ASTM A403 WP316H Pipe Fittings Dimensional Tolerances

SS 316H Buttweld Tolerances For Specific Fittings
ASTM A403 Grade WP316H Buttweld Fittings Alignment Tolerances
MSS SP-43 SS 316H Buttweld Fittings Dimensions and Tolerances
Stainless Steel 316H Pipe Fittings Dimensions
ASTM A403 Gr WP316H Buttweld Fittings Applications
Stainless Steel 316H Pipe Fittings Exports to
SS 316H Pipe Fittings Types and Prices

The Stainless Steel 316H Butt Welded Pipe Fittings are a must-have product when there is a need to connect or disconnect non-working pipes or tubes. It is the most demanded industrial product category. They also have a high carbon content for excellent chemical resistance. Furthermore, they are equally resistant to oxidative and reducing environments. The Stainless Steel 316H Buttweld Fittings are composed in low temperature environments, for which they have excellent strength. These pipe fittings have an exponential versatile base and are made up of different chemical compounds, which makes it one of the most highly rated and preferred industrial products by several industry experts.

Value Added Services

Epoxy Coating
Electro Polish
Sand Blasting

Testing

Intergranular Corrosion Test
Tensile Test
Hardness Test

Features

Good load bearing capacity
Excellent versatility and weldability
High tensile strength

Stockholder of ASTM A403 WP316H Pipe Fittingts, WERKSTOFF NR. 1.4301 Seamless Pipe Fittings, ASME SA403 SS 316H Welded Pipe Fittings, ASTM A403 WP316H Equal Tee, Stainless Steel 316H Long / Short Radius Elbow at Best Prices in India.

Stainless Steel 316H Buttweld Fittings Specifications

Product Name:	SS 316H Buttweld Pipe Fittings
Specifications:	ASTM A403 WP316H , ASME SA 403 WP316H
size range:	Welded Fittings:1/2″ – 48″ Seamless Fittings: 1/2″ – 10″ in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions:	ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
SS 316H Pipe Fittings Types:	Seamless / Welded / Fabricated
Thickness:	SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius:	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Stainless Steel Pipe Fitting
Elbows:	Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process:	Forge, Cast, Push, Press, etc.
Key markets and industries:	Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC):	Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application:	SS 316H Pipe Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications.

ASTM A403 WP316H Buttweld Fittings Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316H	1.4401	S31609	–	–	–	–	–

SS 316H Pipe Fittings Chemical Composition

Grade		C	Mo	Ni	Si	P	Mn	S	Cr	N
SS 316H	Min	0.04	2.00	10.0	0	–	0.04	–	16.0	–
SS 316H	max	0.10	3.00	14.0	0.75	0.045	0.10	0.03	18.0	–

ASTM A403 Gr 316H Pipe Fittings Mechanical Properties

Grade	Yield Strength 0.2% Proof (MPa) min	Tensile Strength (MPa) min	Elongation (% in 50mm) min	Hardness
				Rockwell B (HR B) max	Brinell (HB) max
316H	205	515	40%	95	217

Stainless Steel 316H Buttweld Pipe Fittings Size Range

Below Mentioned SS 316H Pipe Fitting Size: 1/2″ – 48″
ASTM A403 WP316H SS Elbow – Long Radius	ASTM A403 WP316H SS Stub Ends
ASTM A403 Gr WP316H SS Elbow – Short Radius	ASTM A403 WP316H SS Cross
ASTM A403 WP316H SS Reducing Elbow	ASTM A403 WP316H SS Reducing Cross
ASTM A403 Grade WP316H SS 45° Elbow	ASTM A403 WP316H SS Tees
SS ASTM A403 WP316H Fabricated Tee	ASTM A403 WP316H SS End Cap
ASTM A403 GR WP316H SS Reducer	ASTM A403 WP316H Coupling
ASTM A403 WP316H SS Concentric Reducer	ASTM A403 WP316H SS Pipe Nipple
SS ASTM A403 WP316H Eccentric Reducer	ASTM A403 WP316H SS 5D Elbow
ASTM A403 WP316H SS 3D Elbow	ASTM A403 WP316H SS Welded Pipe Fittings

316H Stainless Steel Buttweld Fittings Standards

JIS B2311/B2312 Fittings, Japanese Steel Pipe Fittings Standard (All Sizes are welded) This JIS B2311 Fittings Standard specifies the nickel-chromium ferro-alloy seamless pipe fittings and steel and to be fitted by butt-welding , generally pressure service pipings, high pressure service pipings, high pressure service pipings , low temperature service pipings, high temperature service pipings, high temperature service pipings , alloy steel pipings stainless steel pipings, and steel pipes for fired heaters.
Standard Code	Standard Name
JIS B2311	JIS B2311 Reducer, Elbow SR JIS B2311 BW, Universal steel butt-welding pipe fittings
JIS B2312	JIS B2312 Reducer, JIS B2312 Elbow,Steel butt-welding pipe fittings
JIS B2313	JIS B2313 Fittings, Steel plate butt-welding pipe fittings
Materials	JIS BW fittings are made from materials in accordance with JIS G3452.
Pressure Ratings	JIS B2311/B2312 Buttweld Pipe fittings are free from leakage at hydrostatic pressure up to a maximum of 2.5 MPa.
JIS B2312-82 Fittings Applications	JIS G3452 mostly used for ordinary piping in oil, gas,steam, water, etc at low pressures.

American Steel Pipe Fittings Standard
ANSI ASME SA-403	Forged Durimet pipe fittings
ANSI ASME B16.9	Factory-Made wrought steel pipe fittings
ANSI ASME B16.28	Wrought steel butt-welding short radius elbows and returns
ISO 5251	Stainless steel butt-welding fittings
MSS SP-43	Wrought stainless steel butt-welding fittings
MSS SP-75	Forging butt-welding fittings
German Steel Pipe Fittings Standard
DIN 2605	Steel butt-welding pipe fittings.elbows and bends
DIN 2615	Steel butt-welding pipe fittings.tees
DIN 2616	Steel butt-welding pipe fittings.reducers
DIN 2617	Steel butt-welding pipe fittings.caps
Other Steel Pipe Fittings Standard
EN 1025	3 Butt-welding pipe fittings

SS 316H Buttweld Fittings Dimensional Tolerances

Cross-sectional Tolerances for all ASME/ANSI B16.9 and B16.28 Buttwelding Fittings

Nominal Pipe Size (NPS)	All Fittings
	OD at Bevel		ID at Bevel ±		Wall thickness
	in	mm	in	mm	Wall thickness
½ to 2½	+0.06, -0.03	+1.6, -0.8	0.03	0.8	Not less than 87.5% of nominal wall thickness
3 to 3½	±0.6	±1.6	0.06	1.6
4	±0.6	±1.6	0.06	1.6
5 to 6	+0.09, -0.06	+2.4, -1.6	0.06	1.6
8	+0.09, -0.06	+2.4, -1.6	0.06	1.6
10	+0.16, -0.12	+4.0, -3.2	0.12	3.2
12 to 18	+0.16, -0.12	+4.0, -3.2	0.12	3.2
20 to 24	+0.25, -0.19	+6.4, -4.8	0.19	4.8
26 to 30	+0.25, -0.19	+6.4, -4.8	0.19	4.8
32 to 48	+0.25, -0.19	+6.4, -4.8	0.19	4.8

Stainless Steel 316H Buttweld Tolerances for Specific Buttweld Fittings

Stainless Steel 316H Dimensional Tolerances for ASME/ANSI B16.9 & B16.28 Elbows and Returns

Nominal Pipe Size (NPS)	90° & 45° Long Radius Elbows 90° Short Radius Elbows and Tees		180° Returns
	Centre-to-End Dimension ± A, B		Centre-to-Centre Dimension ± B (=2 x A)		Back-to-Face Dimension ± C
	in	mm	in	mm	in	mm
½ to 2½	0.06	2	0.25	6	0.25	6
3 to 3½	0.06	2	0.25	6	0.25	6
4	0.06	2	0.25	6	0.25	6
5 to 6	0.06	2	0.25	6	0.25	6
8	0.06	2	0.25	6	0.25	6
10	0.09	2	0.38	10	0.25	6
12 to 18	0.09	2	0.38	10	0.25	6
20 to 24	0.09	2	0.38	10	0.25	6
26 to 30	0.12	3	–	–	–	–
32 to 48	0.19	5	–	–	–	–

Stainless Steel 316H Buttweld Fittings Dimensional Tolerances for ASME/ANSI B16.9 Reducers, Caps and Stub Ends

Nominal Pipe Size (NPS)	Reducers & Lap Joint Stub Ends		Caps		Lap Joint Stub Ends
	Overall Length ± A		Overall Length ± A		OD of Lap B		Fillet Radius of Lap B
	in	mm	in	mm	in	mm	in	mm
½ to 2½	0.06	2	0.12	3	+0	+0, -1	+0	+0, -1
3 to 3½	0.06	2	0.12	3	+0, -0.03	+0, -1	+0, -0.03	+0, -1
4	0.06	2	0.12	3	+0, -0.03	+0, -1	+0, -0.06	+0, -2
5 to 6	0.06	2	0.25	6	+0, -0.03	+0, -1	+0, -0.06	+0, -2
8	0.06	2	0.25	6	+0, -0.03	+0, -1	+0, -0.06	+0, -2
10	0.09	2	0.25	6	+0, -0.06	+0, -2	+0, -0.06	+0, -2
12 to 18	0.09	2	0.25	6	+0, -0.06	+0, -2	+0, -0.06	+0, -2
20 to 24	0.09	2	0.25	6	+0, -0.06	+0, -2	+0, -0.06	+0, -2
26 to 30	0.19	5	0.38	10	–	–	–	–
32 to 48	0.19	5	0.38	10	–	–	–	–

Stainless Steel 316H Buttweld Fittings Alignment Tolerances

Stainless Steel Buttweld Fittings Alignment Tolerances

Alignment tolerances are concerned with the way that the ends of a fitting are cut. Exaggerated distortions are shown for clarity in the diagram above.

SS ASTM A403 WP316H Buttweld Pipe Fittings Alignment Tolerances (ASME/ANSI B16.9)

Nominal Pipe Size (NPS)	Off Plane Tolerances, ± A		Off Angle Tolerances, ± B		Alignment of Ends, ± C
Nominal Pipe Size (NPS)	in	mm	in	mm	in	mm
½ to 4	0.06	2	0.03	1	0.03	1
5 to 8	0.12	4	0.06	2	0.03	1
10 to 12	0.19	5	0.09	2	0.06	2
14 to 16	0.25	6	0.09	3	0.06	2
18 to 24	0.38	10	0.12	4	0.06	2
26 to 30	0.38	10	0.19	5	–	–
32 to 42	0.50	13	0.19	5	–	–
44 to 48	0.75	19	0.19	5	–	–

Dimensions and Tolerances of ASTM A403 WP316H Stainless Steel Pipe Fittings (MSS SP-43)

The tolerances and dimensions defined in MSS SP-43 are substantially the same as defined in ASME/ANSI specifications (½ to 24 in). MSS SP-43 only covers ss 316H Buttweld fittings made for use with Schedule 10S and 5S pipe as defined in ANSI/ASME B36.19M also it covers short pattern stub ends suitable for use with Schedule 40S pipe.

MSS SP-43 tolerances are the same as for ASME/ANSI B16.9 and B16.28 except with regard to the outside diameter at the bevel:

Tolerance of OD at Bevel =
± 0.03 in for NPS ½ to 4
+0.06, -0.03 in for NPS 5 to 8
+0.09, -0.03 in for NPS 10 to 18
+0.12, to -0.03 in for NPS 20 to 24

ASTM A403 Grade WP316H Buttweld Fittings Dimensions

Dimensions and weights of ASME B16.9 Stainless Steel 316H Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Stainless Steel 316H Buttweld Fittings Dimensions -45 Degree Elbow, 90 Degree Elbows

Pipe Elbow Nominal Size		Pipe Elbow Outside Diameter Y	Wall Thickness T (Pipe Elbow Schedule)		45 Deg. Elbow LR Centre to Face B	45 Deg. Elbow LR Weight	90 Deg. Elbow LR Centre to Face A	90 Deg. Elbow LR Weight	90 Deg. Elbow SR Centre to Face A	90 Deg. Elbow SR Weight
mm	in	mm	mm	Schedule	mm	kg	mm	kg	mm	kg
15	1/2”	21.3	2.78	STD	15.9	0.04	38.1	0.08	–	–
			3.73	X.S	15.9	0.05	38.1	0.10	–	–
20	3/4”	26.7	2.87	STD	11.1	0.04	28.6	0.08	–	–
			3.91	X.S	11.1	0.05	28.6	0.11	–	–
25	1”	33.4	3.38	STD	22.2	0.09	38.1	0.15	25.4	0.11
			4.55	X.S	22.2	0.11	38.1	0.19	25.4	0.14
32	11/4”	42.2	3.56	STD	25.4	0.14	47.6	0.28	31.75	0.18
			4.85	X.S	25.4	0.2	47.6	0.39	31.75	0.24
40	11/2”	48.3	3.68	STD	28.6	0.2	57.1	0.4	38.1	0.26
			5.08	X.S	28.6	0.25	57.1	0.5	38.1	0.35
50	2”	60.3	3.91	STD	34.9	0.36	76.2	0.72	50.8	0.5
			5.54	X.S	34.9	0.5	76.2	1.0	50.8	0.68
65	21/2”	73.0	5.16	STD	44.4	0.73	95.2	1.46	63.5	0.95
			7.01	X.S	44.4	0.91	95.2	1.82	63.5	1.27
80	3”	88.9	5.49	STD	50.8	1.1	114.3	2.18	76.2	1.45
			7.62	X.S	50.8	1.45	114.3	2.86	76.2	1.95
100	4”	114.3	6.02	STD	63.5	2.1	152.4	4.2	101.6	2.8
			8.56	X.S	63.5	2.9	152.4	5.7	101.6	3.9
125	5”	141.3	6.65	STD	79.4	3.4	190.0	6.8	127.0	4.8
			9.5	X.S	79.4	5.0	190.0	10.0	127.0	6.5
150	6”	168.3	7.11	STD	95.2	5.1	229.0	10.1	152.4	6.8
			10.97	X.S	95.2	7.7	229.0	15.3	152.4	10.2
200	8”	219.1	8.18	STD	127.0	10.2	305.0	20.4	203.0	13.6
			12.7	X.S	127.0	15.5	305.0	30.9	203.0	20.9
250	10”	273.9	9.27	STD	159.0	18.1	381.0	36.1	254.0	24.1
			12.7	X.S	159.0	24.4	381.0	48.8	254.0	32.5
300	12”	323.9	9.52	STD	190.0	26.6	457.0	53.1	305.0	35.4
			12.7	X.S	190.0	35.0	457.0	70.0	305.0	46.7
350	14”	355.6	9.52	STD	222.0	34.1	533.0	68.1	356.0	45.4
			12.7	X.S	222.0	45.0	533.0	90.0	356.0	60.0
400	16”	406.4	9.52	STD	254.0	45.0	610.0	89.3	406.0	59.5
			12.7	X.S	254.0	59.0	610.0	118.0	406.0	78.7
450	18”	457.0	9.52	STD	286.0	56.5	686.0	113.0	457.0	75.6
			12.7	X.S	286.0	75.0	686.0	150.0	457.0	100.0
500	20”	508.0	9.52	STD	318.0	85.0	762.0	140.0	508.0	93.5
			12.7	X.S	318.0	112.5	762.0	186.0	508.0	124.0
600	24”	610.00	9.52	STD	381.0	101.5	914.0	203.0	610.0	135.0
			12.7	X.S	381.0	134.5	914.0	269.0	610.0	179.0

Dimensions and weights of ASME B16.9 Stainless Steel 316H Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

ASTM A403 Wp316H Buttweld Fittings Dimensions-Tee and Cap

Buttweld Tee and Cap Nominal Size		Pipe Tee and Cap Outside Diameter Y	Pipe Tee and Cap Wall Thickness T		Buttweld Tee Dimensions (C and M)	Buttweld Tee Weight	Buttweld Cap End to End	Buttweld Cap Weight
mm	in	mm	mm	Schedule	mm	mm	mm	kg
15	1/2”	21.3	2.78	STD	25.4	0.58
			3.73	X.S	25.4	0.21
20	3/4”	26.7	2.87	STD	28.6	0.21
			3.91	X.S	28.6	0.27
25	1”	33.4	3.38	STD	38.1	0.34	38.1	0.1
			4.55	X.S	38.1	0.43	38.1	0.14
32	11/4”	42.2	3.56	STD	47.6	0.64	38.1	0.14
			4.85	X.S	47.6	0.75	38.1	0.18
40	11/2”	48.3	3.68	STD	57.1	0.95	38.1	0.18
			5.08	X.S	57.1	1.13	38.1	0.23
50	2”	60.3	3.91	STD	63.5	1.45	38.1	0.27
			5.54	X.S	63.5	1.72	38.1	0.32
65	21/2”	73.0	5.16	STD	76.2	2.45	38.1	0.41
			7.01	X.S	76.2	2.95	38.1	0.45
80	3”	88.9	5.49	STD	85.7	3.45	50.8	0.64
			7.62	X.S	85.7	4.3	50.8	0.82
100	4”	114.3	6.02	STD	105.0	5.7	63.5	1.13
			8.56	X.S	105.0	7.3	63.5	1.54
125	5”	141.3	6.65	STD	124.0	9.1	76.2	1.91
			9.5	X.S	124.0	11.8	76.2	2.59
150	6”	168.3	7.11	STD	143.0	13.6	88.9	2.95
			10.97	X.S	143.0	19.0	88.9	4.1
200	8”	219.1	8.18	STD	178.0	25.0	101.6	5.0
			12.7	X.S	178.0	33.5	101.6	7.3
250	10”	273.0	9.27	STD	216.0	41.0	127.0	9.1
			12.7	X.S	216.0	54.0	127.0	12.0
300	12”	323.9	9.52	STD	254.0	57.0	152.4	13.6
			12.7	X.S	254.0	77.0	152.4	17.0
350	14”	355.6	9.52	STD	279.0	73.0	165.1	15.9
			12.7	X.S	279.0	93.0	165.1	21.0
400	16”	406.4	9.52	STD	305.0	91.0	178.8	20.0
			12.7	X.S	305.0	120.0	178.8	26.0
450	18”	457.0	9.52	STD	343.0	127.0	203.2	26.0
			12.7	X.S	343.0	165.0	203.2	34.0
500	20”	508.0	9.52	STD	381.0	227.0	228.6	33.0
			12.7	X.S	381.0	270.0	228.6	43.0
600	24”	610.0	9.52	STD	432.0	345.0	266.7	46.0
			12.7	X.S	432.0	430.0	266.7	61.0

Dimensions and Weights of ASME B16.9 Stainless Steel 316H Buttweld Concentric Reduce rs and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Stainless Steel Buttweld Fittings Dimensions-Concentric Reducers and Eccentric Reducers

Buttweld Reducer Nominal Size		Pipe Reducer Length H	Pipe Reducer Schedule T	Pipe Reducer Weight
mm	in	mm		Kg
20×15	3/4” x 1/2”	38.1	STD	0.07
			XS	0.1
25×15	1” x 1/2”	50.8	STD	0.14
			X.S	0.18
25×20	1” x 3/4”	50.8	STD	0.14
			X.S	0.18
32×15	11/4” x 1/2”	50.8	STD	0.18
			X.S	0.23
32×20	11/4” x 3/4“	50.8	STD	0.18
			X.S	0.23
32×25	11/4” x 1”	50.8	STD	0.18
			X.S	0.23
40×15	11/2” x 1/2”	63.5	STD	0.27
			X.S	0.32
40×20	11/2” x 3/4”	63.5	STD	0.27
			X.S	0.32
40×25	11/2” x 1”	63.5	STD	0.27
			X.S	0.32
40×32	11/2” x 11/4”	63.5	STD	0.27
			X.S	0.32
50×15	2” x 1/2”	76.2	STD	0.41
			X.S	0.54
50×20	2” x 3/4”	76.2	STD	0.41
			X.S	0.54
50×25	2”x1”	76.2	STD	0.41
			X.S	0.54
50×32	2” x 11/4”	76.2	STD	0.41
			X.S	0.54
50×40	2” x 11/2”	76.2	STD	0.41
			X.S	0.54
65×25	21/2” x 1”	88.9	STD	0.68
			X.S	0.91
65×32	21/2” x 11/4”	88.9	STD	0.68
			X.S	0.91
65×40	21/2” x 11/2”	88.9	STD	0.68
			X.S	0.91
65×50	21/2” x 2”	88.9	STD	0.68
			X.S	0.91
80×40	3” x 11/2”	88.9	STD	0.77
			X.S	1.09
80×50	3”x2”	88.9	STD	0.91
			X.S	1.22
80×65	3” x 21/2”	88.9	STD	0.91
			X.S	1.27
100×40	4” x 11/2”	101.6	STD	1.36
			X.S	1.91
100×50	4”x2”	101.6	STD	1.40
			X.S	1.95
100×65	4” x 21/2”	101.6	STD	1.45
			X.S	2.04
100×80	4”x3”	101.6	STD	1.59
			X.S	2.08
125×80	5”x3”	127.0	STD	2.5
			X.S	3.4
125 x 100	5”x4”	127.0	STD	2.7
			X.S	3.8
150×50	6”x2”	140.0	STD	3.4
			X.S	4.3
150×65	6” x 21/2”	140.0	STD	3.4
			X.S	4.5
150×80	6”x3”	140.0	STD	3.6
			X.S	4.8
150 x 100	6”x4”	140.0	STD	3.7
			X.S	5.2
150 x 125	6”x5”	140.0	STD	3.9
			X.S	5.4
200×80	8”x3”	152.4	STD	4.5
			X.S	7.2
200 x 100	8”x4”	152.4	STD	5.0
			X.S	7.7
200 x 125	8”x5”	152.4	STD	5.4
			X.S	8.2
200 x 150	8”x6”	152.4	STD	5.9
			X.S	8.6
250 x 100	10”x4”	178.0	STD	9.1
			X.S	11.8
250 x 125	10”x5”	178.0	STD	9.5
			X.S	13.6
250 x 150	10”x6”	178.0	STD	9.5
			X.S	13.6
250 x 200	10”x8”	178.0	STD	10.0
			X.S	14.0
300 x 150	12”x6”	203.0	STD	14.1
			X.S	18.1
300 x 200	12”x8”	203.0	STD	14.5
			X.S	19.1
300 x 250	12” x 10”	203.0	STD	15.4
			X.S	20.0
350 x 200	14”x8”	330.0	STD	26.3
			X.S	34.9
350 x 250	14” x 10”	330.0	STD	27.2
			X.S	36.3
350 x 300	14” x 12”	330.0	STD	28.6
			X.S	37.6
400 x 200	16”x8”	356.0	STD	31.8
			X.S	42.6
400 x 250	16” x 10”	356.0	STD	33.1
			X.S	43.5
400 x 300	16” x 12”	356.0	STD	34.5
			X.S	45.4
400 x 350	16” x 14”	356.0	STD	35.4
			X.S	46.3
450 x 250	18” x 10”	381.0	STD	38.0
			X.S	52.1
450 x 300	18” x 12”	381.0	STD	39.0
			X.S	53.5
450 x 350	18” x 14”	381.0	STD	40.0
			X.S	54.9
450 x 400	18” x 16”	381.0	STD	40.8
			X.S	53.5
500 x 250	20” x 10”	508.0	STD	53.0
			X.S	79.9
500 x 300	20” x 12”	508.0	STD	54.4
			X.S	82.0
500 x 350	20” x 14”	508.0	STD	57.6
			X.S	80.2
500 x 400	20” x 16”	508.0	STD	58.9
			X.S	82.0
500 x 450	20” x 18”	508.0	STD	61.7
			X.S	82.0
600 x 300	24” x 12”	508.0	STD	63.5
			X.S	84.4
600 x 350	24” x 14”	508.0	STD	65.3
			X.S	86.8
600 x 400	24” x 16”	508.0	STD	68.0
			X.S	90.4
600 x 450	24” x 18”	508.0	STD	72.6
			X.S	96.5
600 x 500	24” x 20”	508.0	STD	77.1
			X.S	102.5

Stainless Steel 316H Buttweld Fittings Types

90 Degree Elbow

Stainless Steel 316H 90 Degree Elbow
Price: $600.00-$1,000.00 / Ton

45 Degree Elbow

Stainless Steel 316H 45 Degree Elbow
Price: $10-$60 / Kilogram

180 Degree Elbow

Stainless Steel 316H 180 Degree Elbow
Price: $1-$40.00 / Piece

1D Elbow — 1D / 1.5D Elbow

Stainless Steel 316H 1D/1.5D Elbow / Bends
Price: $20-$40.00 / Piece

3D / 5D Elbow

Stainless Steel 316H 3D/5D Elbow / Bends
Price: $600.00-$1,000.00 / Ton

Equal Tee

Stainless Steel 316H Equal Tee
Price: $500.00-$1200.00 / Ton

Unequal Tee / Reducing Tee

Stainless Steel 316H Unequal or Reducing Tee
Price: $10-$60.00 / Kilogram

Lateral Tee

Stainless Steel 316H Lateral Tee
Price: $400.00-$900.00 / Ton

Long Radius Pipe Bend

Stainless Steel 316H Long Radius Pipe Bend
Price: $10-$100.00 / Kilogram

Split Tee

Stainless Steel 316H Split Tee
Price: $200.00-$1200.00 / Ton

Concentric Reducer

Stainless Steel 316H Concentric Reducer
Price: $500.00-$1,000.00 / Ton

Eccentric Reducer

Stainless Steel 316H Eccentric Reducer
Price: $400.00-$1300.00 / Ton

Equal Cross

Stainless Steel 316H Equal Cross
Price: $10-$40.00 / Piece

Unequal Cross

Stainless Steel 316H Unequal Cross
Price: $600.00-$1,000.00 / Ton

Lap Joint Stub End

Stainless Steel 316H Lap Joint Stub End
Price: $700.00-$1400.00 / Ton

Pipe Cap / End Cap — End Cap/ Pipe Cap

Stainless Steel 316H Pipe End Caps
Price: $30-$80.00 / Kilogram

Piggable Bend

Stainless Steel 316H Piggable Bend
Price: $600.00-$1,000.00 / Ton

Hot Induction Bend — Hot Induction Pipe Bend

Stainless Steel 316H Hot Induction Pipe Bend
Price: $10-$40.00 / Piece

J PipeBend

Stainless Steel 316H J Pipe Bend
Price: $20-$90.00 / Kilogram

Mitered Pipe Bend

Stainless Steel 316H Mitered Pipe Bend
Price: $600.00-$1,000.00 / Ton

U Pipe Bend

Stainless Steel 316H U Pipe Bend
Price: $10-$40.00 / Piece

3D Pipe Bend

Stainless Steel 316H 3D Pipe Bend
Price: $30-$80.00 / Kilogram

5D Pipe Bend

Stainless Steel 316H 5D Pipe Bend
Price: $600.00-$1,000.00 / Ton

8D Pipe Bend

Stainless Steel 316H 8D Pipe Bend
Price: $10-$40.00 / Piece

10D Pipe Bend

Stainless Steel 316H 10D Pipe Bend
Price: $30-$80.00 / Kilogram

IBR Approved Buttweld Fittings

Stainless Steel 316H IBR Approved Fittings
Price: $600.00-$1,000.00 / Ton

Hub and Clamp Connector Fittings

Stainless Steel 316H Hub and Clamp Connector Fittings
Price: $300-$800 / Ton

Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

ASTM A403 SS 316H Buttweld Pipe Fittings – Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Stainless Steel 316H Buttweld Pipe Fittings. We supply ANSI B16.9 SS 316H Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of 316H Stainless Steel Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Stainless Steel 316H Buttweld Pipe Fittings requirement. We offer SS 316H Pipe Fittings, and ASTM A403 WP316H Buttweld Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have a team of highly skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these SS 316H Buttweld Elbow, Tee, ASTM A403 WP316H Reducer, Bend, Cross, ASTM A403 WP316H End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us