Inconel 601 Pipe Fittings Supplier

Manufacturer of Alloy 601 Pipe Fitings, ASTM B366 UNS N06601 Buttweld Fittings, Incoloy Alloy 601 Pipe Fitting, Inconel® Alloy 601 Seamless Pipe Fittings

However, Inconel 601 Pipe Fittings is an expensive material, one which is best reserved for the right use conditions where other materials won’t work as well. Inconel 601 Equal Tee Pipe Fittings can be used as an internal overlay for valve bodies, bonnets, and internals in carbon steel or low alloy steel to prevent different types of corrosion, such as carbon dioxide, hydrogen sulfide, and pitting. Since Alloy 601 Unequal Tee Pipe Fittings is a group of superalloys and not just one type of superalloy, its chemical composition varies across the different alloy types. The strength of Inconel lies not only in its nickel-chromium base but also in the hardening mechanism of niobium and molybdenum. Inconel 601 Lateral Tee Pipe Fittings are specifically optimized to withstand some of the most demanding manufacturing conditions.
We as a Metalfed Engineering is an eminent supplier of Inconel Alloy 601 Pipe Fittings, which is normally supplied in the solution-annealed condition with an oxidized or descaled surface. It has good resistance to oxidation and corrosion at temperatures in the alloy’s useful strength range in atmospheres encountered in jet engines and gas turbine operations. Strength of ASTM B366 UNS N06601 Pipe Fittings is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix; thus precipitation-hardening treatments are not required.

Exporter of 601 Inconel® Seamless Pipe Fittings, ANSI B16.9 Incoloy 601 Butt weld Fittings,WERKSTOFF NR. 2.4851 Welded Pipe Fittings, Nickel Alloy 601 Pipe Cap Stockist, Grade 601 Inconel Alloy Cross, ASME SB 366 Inconel Alloy 601 Pipe Bend, JIS NCF 601 Stub End.

Table of Content

Inconel 601 Pipe Fittings Specifications
Inconel Alloy 601 Pipe Fittings Equivalent Grades
Incoloy 601 Pipe Fittings Chemical Composition
Alloy 601 Pipe Fittings Mechanical Properties
Inconel 601 Pipe Fittings Size Range
Inconel 601 Pipe Fittings Manufacturing Standards

Inconel 601 Pipe Fittings Dimensional Tolerances
Inconel Alloy 601 Pipe Fittings Dimensions
ASTM B366 UNS N06601 Pipe Fittings Applications
Inconel Alloy 601 Pipe Fittings Exports to
Incoloy 601 Pipe Fittings Types and Prices

Inconel Alloy WNR 2.4851 Pipe Fittings are a class of nickel-chrome-based super alloys characterized by high corrosion resistance, oxidation resistance, strength at high temperatures, and creep resistance.We also have largest stock of Inconel 600 Pipe Fittings, Incoloy 800 Pipe Fittings, andInconel 625 Pipe Fittings at best price.

Value Added Services

Epoxy Coating
Electro Polish
Sand Blasting

Testing

Intergranular Corrosion Test
Tensile Test
Hardness Test

Features

Good load bearing capacity
Excellent versatility and weldability
High tensile strength

Largest Stockist of ASTM B366 UNS N06601 Fittings, Incoloy Alloy 601 Two Joint Pipe Fittings, Inconel Alloy 601 Buttweld Elbow, Alloy 601 Reducer, Inconel Alloy 601 Equal Tee at best price in India.

Inconel Alloy 601 Buttweld Fittings Specifications

Product Name:	Inconel 601 Pipe Fittings
Specifications:	ASTM B366 / ASME SB366
size:	Welded Butt Weld Fittings:1/2″ – 48″ Seamless Butt Weld Fittings: 1/2″ – 10″ in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions:	ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
Types:	Seamless / Welded / Fabricated
Thickness:	SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius:	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Inconel Alloy Steel Pipe Fitting
Elbows:	Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process:	Forge, Cast, Push, Press, etc.
Key markets and industries:	Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC):	Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application:	Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications.

ASTM B366 UNS N06601 Buttweld Fittings Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 601	2.4851	N06601	NCF 601	NA 49	XH60BT	NC23FeA	NiCr23Fe

Incoloy Alloy 601 Pipe Fittings Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 601	0.15 max	1.00 max	0.50 max	0.015max	1.0 max	balance	58.0-63.0	21.0-25.0

Inconel 601 Pipe Fittings Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 601	8.1 g/cm3	1411 °C (2571 °F)	Psi – 80,000 , MPa – 550	Psi – 30,000 , MPa – 205	30 %

Incoloy 601 Pipe Fittings Size Range

Below Mentioned Pipe Fitting Size: 1/2″ – 48″
ASTM B366 Inconel 601 Elbow – Long Radius	Inconel 601 ASTM B366 Stub Ends
Inconel 601 Elbow – Short Radius	ASTM B366 Inconel Alloy 601 Cross
ASTM B366 Inconel 601 Reducing Elbow	ASTM B366 Inconel 601 Reducing Cross
ASTM B366 Inconel 601 45° Elbow	ASTM B366 Inconel 601 Tees
ASTM B366 Inconel 601 Fabricated Tee	ASTM B366 Inconel 601 End Cap
ASTM B366 Inconel 601 Reducer	ASTM B366 Inconel 601 Coupling
ASTM B366 Inconel 601 Concentric Reducer	ASTM B366 Inconel 601 Pipe Nipple
ASTM B366 Inconel 601 Eccentric Reducer	ASTM B366 Inconel 601 5D Elbow
ASTM B366 Inconel 601 3D Elbow	ASTM B366 Inconel 601 Welded Pipe Fittings

Inconel 601 Buttweld Fittings Standards

American Steel Pipe Fittings Standard
Standard Code	Standard Name
Forged Durimet pipe fittings	ANSI ASME SA-366
Factory-Made wrought steel pipe fittings	ANSI ASME B16.9
Wrought steel butt-welding short radius elbows and returns	ANSI ASME B16.28
Inconel butt-welding fittings	ISO 5251
Wrought Inconel butt-welding fittings	MSS SP-43
Forging butt-welding fittings	MSS SP-75
Japanese Steel Pipe Fittings Standard
Universal steel butt-welding pipe fittings	JIS B2311
Steel butt-welding pipe fittings	JIS B2312
Steel plate butt-welding pipe fittings	JIS B2313
German Steel Pipe Fittings Standard
Steel butt-welding pipe fittings.elbows and bends	DIN 2605
Steel butt-welding pipe fittings.tees	DIN 2615
Steel butt-welding pipe fittings.reducers	DIN 2616
Steel butt-welding pipe fittings.caps	DIN 2617
Other Steel Pipe Fittings Standard
3 Butt-welding pipe fittings	EN 1025

Inconel 601 Buttweld Fittings Dimensional Tolerances

Tolerance of Butt-welding Fittings ASME B16.9


All Fittings[Note(1) and (2)]				Center-to-End Diamensions		Overall Length of Reducers and Lap Joint Stub Ends,F,H	Overall Length of Caps, E	180-deg Returns
Nominal Pipe Size(NPS)	DN	Outside Diameter at Bevel,D[Note(3) and (4)]	Inside Diameter at End [Note(3) and (5)]	90-deg and 45-deg Long and Short Radius Elbows and Tees. A,B,C,M	3D Radius Elbows, A,B	Overall Length of Reducers and Lap Joint Stub Ends,F,H	Overall Length of Caps, E	Center-to-Center Dimension, O	Back-to-Face Demensoin, K	Alignment of Ends, U
1/2to2 1/2	15-65	+1.6-0.8	0.8	2	3	2	3	6	6	1
3to3 1/2	80-90	1.6	1.6	2	3	2	3	6	6	1
4	100	1.6	1.6	2	3	2	3	6	6	1
5to8	125-200	+2.4 -1.6	1.6	2	3	2	6	6	6	1
10to18	250-450	+4.0 -3.2	3.2	2	3	2	6	10	6	2
20to24	500-601	+6.4 -4.8	4.8	2	3	2	6	10	6	2
26to30	650-750	+6.4 -4.8	4.8	3	6	5	10	…	…	…
32to48	800-1200	+6.4 -4.8	4.8	5	6	5	10	…	…	…
All Fittings[Note(1) and (2)]				Center-to-End Diamensions			Nominal Pipe Size(NPS)	DN	Angularity Tolerance
Nominal Pipe Size(NPS)	DN	Outside Diameter at Bevel,D[Note(3) and (4)]	Inside Diameter at End [Note(3) and (5)]	Outside Diameter of Lap,G	Fillet Radius of Lap,R	Lap Thickness	Nominal Pipe Size(NPS)	DN	Off Angle,Q	Off Plane,P
1/2to2 1/2	15-65	+1.6-0.8	0.8	+0,-1	+0,-1	+1.6,-0	1/2to4	15-100	1	2
3to3 1/2	80-90	1.6	1.6	+0,-1	+0,-1	+1.6,-0	5to8	125-200	2	4
4	100	1.6	1.6	+0,-1	+0,-2	+1.6,-0	10to12	250-300	3	5
5to8	125-200	+2.4 -1.6	1.6	+0,-1	+0,-2	+1.6,-0	14to16	350-400	3	6
10to18	250-450	+4.0 -3.2	3.2	+0,-2	+0,-2	+3.2,-0	18to24	450-601	4	`10
20to24	500-601	+6.4 -4.8	4.8	+0,-2	+0,-2	+3.2,-0	26to30	650-750	5	10
26to30	650-750	+6.4 -4.8	4.8	…	…	…	32to42	800-1050	5	13
32to48	800-1200	+6.4 -4.8	4.8	…	…	…	44to48	1100-1200	5	19

GENERAL NOTES:
(a)All dimensions are in mm.
(b)Tolerances are equal plus and minus except as noted.

NOTES:
(1)The inside diameter and the nominal wall thicknesat ends are to be specified by the purchaser.
(2)A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness toletance.
(3)Out-of-round is the sum of absolute values of plus and minus tolerances.

Inconel 601 Buttweld Fittings Dimensions

Dimensions and weights of ASME B16.9 Inconel 601 Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Pipe Elbow Nominal Size		Pipe Elbow Outside Diameter Y	Wall Thickness T (Pipe Elbow Schedule)		45 Deg. Elbow LR Centre to Face B	45 Deg. Elbow LR Weight	90 Deg. Elbow LR Centre to Face A	90 Deg. Elbow LR Weight	90 Deg. Elbow SR Centre to Face A	90 Deg. Elbow SR Weight
mm	in	mm	mm	Schedule	mm	kg	mm	kg	mm	kg
15	1/2”	21.3	2.78	STD	15.9	0.04	38.1	0.08	–	–
			3.73	X.S	15.9	0.05	38.1	0.10	–	–
20	3/4”	26.7	2.87	STD	11.1	0.04	28.6	0.08	–	–
			3.91	X.S	11.1	0.05	28.6	0.11	–	–
25	1”	33.4	3.38	STD	22.2	0.09	38.1	0.15	25.4	0.11
			4.55	X.S	22.2	0.11	38.1	0.19	25.4	0.14
32	11/4”	42.2	3.56	STD	25.4	0.14	47.6	0.28	31.75	0.18
			4.85	X.S	25.4	0.2	47.6	0.39	31.75	0.24
40	11/2”	48.3	3.68	STD	28.6	0.2	57.1	0.4	38.1	0.26
			5.08	X.S	28.6	0.25	57.1	0.5	38.1	0.35
50	2”	60.3	3.91	STD	34.9	0.36	76.2	0.72	50.8	0.5
			5.54	X.S	34.9	0.5	76.2	1.0	50.8	0.68
65	21/2”	73.0	5.16	STD	44.4	0.73	95.2	1.46	63.5	0.95
			7.01	X.S	44.4	0.91	95.2	1.82	63.5	1.27
80	3”	88.9	5.49	STD	50.8	1.1	114.3	2.18	76.2	1.45
			7.62	X.S	50.8	1.45	114.3	2.86	76.2	1.95
100	4”	114.3	6.02	STD	63.5	2.1	152.4	4.2	101.6	2.8
			8.56	X.S	63.5	2.9	152.4	5.7	101.6	3.9
125	5”	141.3	6.65	STD	79.4	3.4	190.0	6.8	127.0	4.8
			9.5	X.S	79.4	5.0	190.0	10.0	127.0	6.5
150	6”	168.3	7.11	STD	95.2	5.1	229.0	10.1	152.4	6.8
			10.97	X.S	95.2	7.7	229.0	15.3	152.4	10.2
200	8”	219.1	8.18	STD	127.0	10.2	305.0	20.4	203.0	13.6
			12.7	X.S	127.0	15.5	305.0	30.9	203.0	20.9
250	10”	273.9	9.27	STD	159.0	18.1	381.0	36.1	254.0	24.1
			12.7	X.S	159.0	24.4	381.0	48.8	254.0	32.5
300	12”	323.9	9.52	STD	190.0	26.6	457.0	53.1	305.0	35.4
			12.7	X.S	190.0	35.0	457.0	70.0	305.0	46.7
350	14”	355.6	9.52	STD	222.0	34.1	533.0	68.1	356.0	45.4
			12.7	X.S	222.0	45.0	533.0	90.0	356.0	60.0
400	16”	406.4	9.52	STD	254.0	45.0	610.0	89.3	406.0	59.5
			12.7	X.S	254.0	59.0	610.0	118.0	406.0	78.7
450	18”	457.0	9.52	STD	286.0	56.5	686.0	113.0	457.0	75.6
			12.7	X.S	286.0	75.0	686.0	150.0	457.0	100.0
500	20”	508.0	9.52	STD	318.0	85.0	762.0	140.0	508.0	93.5
			12.7	X.S	318.0	112.5	762.0	186.0	508.0	124.0
601	24”	610.00	9.52	STD	381.0	101.5	914.0	203.0	610.0	135.0
			12.7	X.S	381.0	134.5	914.0	269.0	610.0	179.0

Dimensions and weights of ASME B16.9 Inconel 601 Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

Buttweld Tee and Cap Nominal Size		Pipe Tee and Cap Outside Diameter Y	Pipe Tee and Cap Wall Thickness T		Buttweld Tee Dimensions (C and M)	Buttweld Tee Weight	Buttweld Cap End to End	Buttweld Cap Weight
mm	in	mm	mm	Schedule	mm	mm	mm	kg
15	1/2”	21.3	2.78	STD	25.4	0.58
			3.73	X.S	25.4	0.21
20	3/4”	26.7	2.87	STD	28.6	0.21
			3.91	X.S	28.6	0.27
25	1”	33.4	3.38	STD	38.1	0.34	38.1	0.1
			4.55	X.S	38.1	0.43	38.1	0.14
32	11/4”	42.2	3.56	STD	47.6	0.64	38.1	0.14
			4.85	X.S	47.6	0.75	38.1	0.18
40	11/2”	48.3	3.68	STD	57.1	0.95	38.1	0.18
			5.08	X.S	57.1	1.13	38.1	0.23
50	2”	60.3	3.91	STD	63.5	1.45	38.1	0.27
			5.54	X.S	63.5	1.72	38.1	0.32
65	21/2”	73.0	5.16	STD	76.2	2.45	38.1	0.41
			7.01	X.S	76.2	2.95	38.1	0.45
80	3”	88.9	5.49	STD	85.7	3.45	50.8	0.64
			7.62	X.S	85.7	4.3	50.8	0.82
100	4”	114.3	6.02	STD	105.0	5.7	63.5	1.13
			8.56	X.S	105.0	7.3	63.5	1.54
125	5”	141.3	6.65	STD	124.0	9.1	76.2	1.91
			9.5	X.S	124.0	11.8	76.2	2.59
150	6”	168.3	7.11	STD	143.0	13.6	88.9	2.95
			10.97	X.S	143.0	19.0	88.9	4.1
200	8”	219.1	8.18	STD	178.0	25.0	101.6	5.0
			12.7	X.S	178.0	33.5	101.6	7.3
250	10”	273.0	9.27	STD	216.0	41.0	127.0	9.1
			12.7	X.S	216.0	54.0	127.0	12.0
300	12”	323.9	9.52	STD	254.0	57.0	152.4	13.6
			12.7	X.S	254.0	77.0	152.4	17.0
350	14”	355.6	9.52	STD	279.0	73.0	165.1	15.9
			12.7	X.S	279.0	93.0	165.1	21.0
400	16”	406.4	9.52	STD	305.0	91.0	178.8	20.0
			12.7	X.S	305.0	120.0	178.8	26.0
450	18”	457.0	9.52	STD	343.0	127.0	203.2	26.0
			12.7	X.S	343.0	165.0	203.2	34.0
500	20”	508.0	9.52	STD	381.0	227.0	228.6	33.0
			12.7	X.S	381.0	270.0	228.6	43.0
601	24”	610.0	9.52	STD	432.0	345.0	266.7	46.0
			12.7	X.S	432.0	430.0	266.7	61.0

Dimensions and Weights of ASME B16.9 Inconel 601 Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Buttweld Reducer Nominal Size		Pipe Reducer Length H	Pipe Reducer Schedule T	Pipe Reducer Weight
mm	in	mm		Kg
20×15	3/4” x 1/2”	38.1	STD	0.07
			XS	0.1
25×15	1” x 1/2”	50.8	STD	0.14
			X.S	0.18
25×20	1” x 3/4”	50.8	STD	0.14
			X.S	0.18
32×15	11/4” x 1/2”	50.8	STD	0.18
			X.S	0.23
32×20	11/4” x 3/4“	50.8	STD	0.18
			X.S	0.23
32×25	11/4” x 1”	50.8	STD	0.18
			X.S	0.23
40×15	11/2” x 1/2”	63.5	STD	0.27
			X.S	0.32
40×20	11/2” x 3/4”	63.5	STD	0.27
			X.S	0.32
40×25	11/2” x 1”	63.5	STD	0.27
			X.S	0.32
40×32	11/2” x 11/4”	63.5	STD	0.27
			X.S	0.32
50×15	2” x 1/2”	76.2	STD	0.41
			X.S	0.54
50×20	2” x 3/4”	76.2	STD	0.41
			X.S	0.54
50×25	2”x1”	76.2	STD	0.41
			X.S	0.54
50×32	2” x 11/4”	76.2	STD	0.41
			X.S	0.54
50×40	2” x 11/2”	76.2	STD	0.41
			X.S	0.54
65×25	21/2” x 1”	88.9	STD	0.68
			X.S	0.91
65×32	21/2” x 11/4”	88.9	STD	0.68
			X.S	0.91
65×40	21/2” x 11/2”	88.9	STD	0.68
			X.S	0.91
65×50	21/2” x 2”	88.9	STD	0.68
			X.S	0.91
80×40	3” x 11/2”	88.9	STD	0.77
			X.S	1.09
80×50	3”x2”	88.9	STD	0.91
			X.S	1.22
80×65	3” x 21/2”	88.9	STD	0.91
			X.S	1.27
100×40	4” x 11/2”	101.6	STD	1.36
			X.S	1.91
100×50	4”x2”	101.6	STD	1.40
			X.S	1.95
100×65	4” x 21/2”	101.6	STD	1.45
			X.S	2.04
100×80	4”x3”	101.6	STD	1.59
			X.S	2.08
125×80	5”x3”	127.0	STD	2.5
			X.S	3.4
125 x 100	5”x4”	127.0	STD	2.7
			X.S	3.8
150×50	6”x2”	140.0	STD	3.4
			X.S	4.3
150×65	6” x 21/2”	140.0	STD	3.4
			X.S	4.5
150×80	6”x3”	140.0	STD	3.6
			X.S	4.8
150 x 100	6”x4”	140.0	STD	3.7
			X.S	5.2
150 x 125	6”x5”	140.0	STD	3.9
			X.S	5.4
200×80	8”x3”	152.4	STD	4.5
			X.S	7.2
200 x 100	8”x4”	152.4	STD	5.0
			X.S	7.7
200 x 125	8”x5”	152.4	STD	5.4
			X.S	8.2
200 x 150	8”x6”	152.4	STD	5.9
			X.S	8.6
250 x 100	10”x4”	178.0	STD	9.1
			X.S	11.8
250 x 125	10”x5”	178.0	STD	9.5
			X.S	13.6
250 x 150	10”x6”	178.0	STD	9.5
			X.S	13.6
250 x 200	10”x8”	178.0	STD	10.0
			X.S	14.0
300 x 150	12”x6”	203.0	STD	14.1
			X.S	18.1
300 x 200	12”x8”	203.0	STD	14.5
			X.S	19.1
300 x 250	12” x 10”	203.0	STD	15.4
			X.S	20.0
350 x 200	14”x8”	330.0	STD	26.3
			X.S	34.9
350 x 250	14” x 10”	330.0	STD	27.2
			X.S	36.3
350 x 300	14” x 12”	330.0	STD	28.6
			X.S	37.6
400 x 200	16”x8”	356.0	STD	31.8
			X.S	42.6
400 x 250	16” x 10”	356.0	STD	33.1
			X.S	43.5
400 x 300	16” x 12”	356.0	STD	34.5
			X.S	45.4
400 x 350	16” x 14”	356.0	STD	35.4
			X.S	46.3
450 x 250	18” x 10”	381.0	STD	38.0
			X.S	52.1
450 x 300	18” x 12”	381.0	STD	39.0
			X.S	53.5
450 x 350	18” x 14”	381.0	STD	40.0
			X.S	54.9
450 x 400	18” x 16”	381.0	STD	40.8
			X.S	53.5
500 x 250	20” x 10”	508.0	STD	53.0
			X.S	79.9
500 x 300	20” x 12”	508.0	STD	54.4
			X.S	82.0
500 x 350	20” x 14”	508.0	STD	57.6
			X.S	80.2
500 x 400	20” x 16”	508.0	STD	58.9
			X.S	82.0
500 x 450	20” x 18”	508.0	STD	61.7
			X.S	82.0
601 x 300	24” x 12”	508.0	STD	63.5
			X.S	84.4
601 x 350	24” x 14”	508.0	STD	65.3
			X.S	86.8
601 x 400	24” x 16”	508.0	STD	68.0
			X.S	90.4
601 x 450	24” x 18”	508.0	STD	72.6
			X.S	96.5
601 x 500	24” x 20”	508.0	STD	77.1
			X.S	102.5

Inconel 601 Buttweld Fittings Types

Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

ASTM B366 Inconel 601 Buttweld Pipe Fittings – Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Inconel Alloy 601 Buttweld Pipe Fittings. We supply ANSI B16.9 Incoloy 601 Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Inconel 601 Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Incoloy Alloy 601 Pipe Fittings requirement. We offer Nickel Alloy 601 Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have huge ready stock of Inconel 601 Buttweld Elbow, Incoloy 601 Tee, Reducer, Bend, Cross, End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end. Buy ASTM B366 Inconel 601 Pipe Fittingat a lowest price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us