Manufacturer of Monel Buttweld Fittings, Monel Buttweld Elbow, ASTM B366 Monel Seamless Pipe Fittings in India.
Monel Pipe Fittings are When industrialized end use applications which will be applied in extreme atmospheres such as those that need to endure extreme temperatures, elevated pressure or extremely corrosive atmospheres, choosing an alloy that is up to that undertaking is critical. Due to its resistance to deterioration, Monel Buttweld Pipe Fittings is most often used in parts found in marine and chemical environments. It can be used in temperatures up to 1000 Degree F and the alloy has great mechanical properties at sub-zero temperatures.
We as a Metalfed Engineering is a prominent manufacturer of Monel Alloy Pipe Fittings, which is a solid solution alloy that can be hardened by the process of cold working. It is resilient to sea water at soaring temperatures along with to caustic and salt solutions. It shows excellent characteristics such as good erosion resistance, first-rate weldability and soaring strength. Monel Alloy 90-Degree Elbow Pipe Fittings has soaring strength and durability over an extensive temperature range along with outstanding resistance to a lot of corrosive atmospheres. Sturdier than pure nickel, these Monel alloys are quite resistant to erosion by a lot of aggressive agents, containing speedily flowing seawater. We also have huge ready stock of Monel 400 Pipe Fittings and Monel K500 Pipe Fittings.
Largest Stockist of Monel Buttweld Pipe Elbow, Monel Weldable Fittings, Monel Buttweld Reducer, ASTM B366 Monel Pipe Fittings, Monel Alloy Equal Tee at best price in India.
Monel Alloy 45-Degree Elbow Pipe Fittings exhibits excellent weldability, and it is often found in marine applications such as seawater valves and pump shafts. It can be hardened by cold working, but can be hot worked or cold worked followed by annealing into complex fabrications and welding with an appropriate welding process. Buy Monel Buttweld Pipe fittings at best price.
- Epoxy Coating
- Electro Polish
- Sand Blasting
- Intergranular Corrosion Test
- Tensile Test
- Hardness Test
- Good load bearing capacity
- Excellent versatility and weldability
- High tensile strength
Exporter of ANSI B16.9 Monel Butt weld Fittings, Monel Buttweld Pipe Cap Stockist, Monel Buttweld Cross, ASME SB 366 Monel Alloy Pipe Bend, Monel Alloy Stub End.
Monel Alloy Buttweld Fittings Specifications
| Product Name: | Monel Pipe Fittings |
| Specifications: | ASTM B366 / ASME SB366 |
| size: | Welded Butt Weld Fittings:1/2″ – 48″ Seamless Butt Weld Fittings: 1/2″ – 10″ in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
| Dimensions: | ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10 |
| Types: | Seamless / Welded / Fabricated |
| Thickness: | SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75 |
| Bending Radius: | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Monel Alloy Steel Pipe Fitting |
| Elbows: | Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO |
| Manufacturing process: | Forge, Cast, Push, Press, etc. |
| Key markets and industries: | Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless). |
| Test Certificates (TC): | Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc |
| Material Test Certificates (MTC): | As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175 |
| Uses & Application: | Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications. |
Monel Pipe Fittings Size Range
| Below Mentioned Pipe Fitting Size: 1/2″ – 48″ | |
| ASTM B366 Monel Elbow – Long Radius | Monel ASTM B366 Stub Ends |
| Monel Elbow – Short Radius | ASTM B366 Monel Alloy Cross |
| ASTM B366 Monel Reducing Elbow | ASTM B366 Monel Reducing Cross |
| ASTM B366 Monel 45° Elbow | ASTM B366 Monel Tees |
| ASTM B366 Monel Fabricated Tee | ASTM B366 Monel End Cap |
| ASTM B366 Monel Reducer | ASTM B366 Monel Coupling |
| ASTM B366 Monel Concentric Reducer | ASTM B366 Monel Pipe Nipple |
| ASTM B366 Monel Eccentric Reducer | ASTM B366 Monel 5D Elbow |
| ASTM B366 Monel 3D Elbow | ASTM B366 Monel Welded Pipe Fittings |
Monel Buttweld Fittings Standards
| American Steel Pipe Fittings Standard | |
| Standard Code | Standard Name |
| Forged Durimet pipe fittings | ANSI ASME SB-366 |
| Factory-Made wrought steel pipe fittings | ANSI ASME B16.9 |
| Wrought steel butt-welding short radius elbows and returns | ANSI ASME B16.28 |
| Monel butt-welding fittings | ISO 5251 |
| Wrought Monel butt-welding fittings | MSS SP-43 |
| Forging butt-welding fittings | MSS SP-75 |
| Japanese Steel Pipe Fittings Standard | |
| Universal steel butt-welding pipe fittings | JIS B2311 |
| Steel butt-welding pipe fittings | JIS B2312 |
| Steel plate butt-welding pipe fittings | JIS B2313 |
| German Steel Pipe Fittings Standard | |
| Steel butt-welding pipe fittings.elbows and bends | DIN 2605 |
| Steel butt-welding pipe fittings.tees | DIN 2615 |
| Steel butt-welding pipe fittings.reducers | DIN 2616 |
| Steel butt-welding pipe fittings.caps | DIN 2617 |
| Other Steel Pipe Fittings Standard | |
| 3 Butt-welding pipe fittings | EN 1025 |
Monel Pipe Fittings Dimensional Tolerances
Tolerance of Butt-welding Fittings ASME B16.9
| All Fittings[Note(1) and (2)] | Center-to-End Diamensions | Overall Length of Reducers and Lap Joint Stub Ends,F,H | Overall Length of Caps, E | 180-deg Returns | ||||||
| Nominal Pipe Size(NPS) | DN | Outside Diameter at Bevel,D[Note(3) and (4)] | Inside Diameter at End [Note(3) and (5)] | 90-deg and 45-deg Long and Short Radius Elbows and Tees. A,B,C,M | 3D Radius Elbows, A,B | Center-to-Center Dimension, O | Back-to-Face Demensoin, K | Alignment of Ends, U | ||
| 1/2to2 1/2 | 15-65 | +1.6-0.8 | 0.8 | 2 | 3 | 2 | 3 | 6 | 6 | 1 |
| 3to3 1/2 | 80-90 | 1.6 | 1.6 | 2 | 3 | 2 | 3 | 6 | 6 | 1 |
| 4 | 100 | 1.6 | 1.6 | 2 | 3 | 2 | 3 | 6 | 6 | 1 |
| 5to8 | 125-200 | +2.4 -1.6 | 1.6 | 2 | 3 | 2 | 6 | 6 | 6 | 1 |
| 10to18 | 250-450 | +4.0 -3.2 | 3.2 | 2 | 3 | 2 | 6 | 10 | 6 | 2 |
| 20to24 | 500-600 | +6.4 -4.8 | 4.8 | 2 | 3 | 2 | 6 | 10 | 6 | 2 |
| 26to30 | 650-750 | +6.4 -4.8 | 4.8 | 3 | 6 | 5 | 10 | … | … | … |
| 32to48 | 800-1200 | +6.4 -4.8 | 4.8 | 5 | 6 | 5 | 10 | … | … | … |
| All Fittings[Note(1) and (2)] | Center-to-End Diamensions | Nominal Pipe Size(NPS) | DN | Angularity Tolerance | ||||||
| Nominal Pipe Size(NPS) | DN | Outside Diameter at Bevel,D[Note(3) and (4)] | Inside Diameter at End [Note(3) and (5)] | Outside Diameter of Lap,G | Fillet Radius of Lap,R | Lap Thickness | Off Angle,Q | Off Plane,P | ||
| 1/2to2 1/2 | 15-65 | +1.6-0.8 | 0.8 | +0,-1 | +0,-1 | +1.6,-0 | 1/2to4 | 15-100 | 1 | 2 |
| 3to3 1/2 | 80-90 | 1.6 | 1.6 | +0,-1 | +0,-1 | +1.6,-0 | 5to8 | 125-200 | 2 | 4 |
| 4 | 100 | 1.6 | 1.6 | +0,-1 | +0,-2 | +1.6,-0 | 10to12 | 250-300 | 3 | 5 |
| 5to8 | 125-200 | +2.4 -1.6 | 1.6 | +0,-1 | +0,-2 | +1.6,-0 | 14to16 | 350-400 | 3 | 6 |
| 10to18 | 250-450 | +4.0 -3.2 | 3.2 | +0,-2 | +0,-2 | +3.2,-0 | 18to24 | 450-600 | 4 | `10 |
| 20to24 | 500-600 | +6.4 -4.8 | 4.8 | +0,-2 | +0,-2 | +3.2,-0 | 26to30 | 650-750 | 5 | 10 |
| 26to30 | 650-750 | +6.4 -4.8 | 4.8 | … | … | … | 32to42 | 800-1050 | 5 | 13 |
| 32to48 | 800-1200 | +6.4 -4.8 | 4.8 | … | … | … | 44to48 | 1100-1200 | 5 | 19 |
GENERAL NOTES:
(a)All dimensions are in mm.
(b)Tolerances are equal plus and minus except as noted.
NOTES:
(1)The inside diameter and the nominal wall thicknesat ends are to be specified by the purchaser.
(2)A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness toletance.
(3)Out-of-round is the sum of absolute values of plus and minus tolerances.
Monel Buttweld Fittings Dimensions
Dimensions and weights of ASME B16.9 Monel Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)
| Pipe Elbow Nominal Size | Pipe Elbow Outside Diameter Y |
Wall Thickness T (Pipe Elbow Schedule) |
45 Deg. Elbow LR Centre to Face B | 45 Deg. Elbow LR Weight |
90 Deg. Elbow LR Centre to Face A | 90 Deg. Elbow LR Weight | 90 Deg. Elbow SR Centre to Face A | 90 Deg. Elbow SR Weight | ||
| mm | in | mm | mm | Schedule | mm | kg | mm | kg | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
| 3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
| 20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
| 3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
| 25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
| 4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
| 4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
| 5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
| 5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
| 7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
| 7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
| 8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
| 9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
| 10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
| 12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
| 250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
| 12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
| 12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
| 12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
| 12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
| 12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
| 12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
| 600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
| 12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 | |||
Dimensions and weights of ASME B16.9 Monel Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)
| Buttweld Tee and Cap Nominal Size |
Pipe Tee and Cap Outside Diameter Y |
Pipe Tee and Cap Wall Thickness T |
Buttweld Tee Dimensions (C and M) |
Buttweld Tee Weight |
Buttweld Cap End to End |
Buttweld Cap Weight |
||
| mm | in | mm | mm | Schedule | mm | mm | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 25.4 | 0.58 | ||
| 3.73 | X.S | 25.4 | 0.21 | |||||
| 20 | 3/4” | 26.7 | 2.87 | STD | 28.6 | 0.21 | ||
| 3.91 | X.S | 28.6 | 0.27 | |||||
| 25 | 1” | 33.4 | 3.38 | STD | 38.1 | 0.34 | 38.1 | 0.1 |
| 4.55 | X.S | 38.1 | 0.43 | 38.1 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 47.6 | 0.64 | 38.1 | 0.14 |
| 4.85 | X.S | 47.6 | 0.75 | 38.1 | 0.18 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 57.1 | 0.95 | 38.1 | 0.18 |
| 5.08 | X.S | 57.1 | 1.13 | 38.1 | 0.23 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 63.5 | 1.45 | 38.1 | 0.27 |
| 5.54 | X.S | 63.5 | 1.72 | 38.1 | 0.32 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 76.2 | 2.45 | 38.1 | 0.41 |
| 7.01 | X.S | 76.2 | 2.95 | 38.1 | 0.45 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 85.7 | 3.45 | 50.8 | 0.64 |
| 7.62 | X.S | 85.7 | 4.3 | 50.8 | 0.82 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 105.0 | 5.7 | 63.5 | 1.13 |
| 8.56 | X.S | 105.0 | 7.3 | 63.5 | 1.54 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 124.0 | 9.1 | 76.2 | 1.91 |
| 9.5 | X.S | 124.0 | 11.8 | 76.2 | 2.59 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 143.0 | 13.6 | 88.9 | 2.95 |
| 10.97 | X.S | 143.0 | 19.0 | 88.9 | 4.1 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 178.0 | 25.0 | 101.6 | 5.0 |
| 12.7 | X.S | 178.0 | 33.5 | 101.6 | 7.3 | |||
| 250 | 10” | 273.0 | 9.27 | STD | 216.0 | 41.0 | 127.0 | 9.1 |
| 12.7 | X.S | 216.0 | 54.0 | 127.0 | 12.0 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 254.0 | 57.0 | 152.4 | 13.6 |
| 12.7 | X.S | 254.0 | 77.0 | 152.4 | 17.0 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 279.0 | 73.0 | 165.1 | 15.9 |
| 12.7 | X.S | 279.0 | 93.0 | 165.1 | 21.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 305.0 | 91.0 | 178.8 | 20.0 |
| 12.7 | X.S | 305.0 | 120.0 | 178.8 | 26.0 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 343.0 | 127.0 | 203.2 | 26.0 |
| 12.7 | X.S | 343.0 | 165.0 | 203.2 | 34.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 381.0 | 227.0 | 228.6 | 33.0 |
| 12.7 | X.S | 381.0 | 270.0 | 228.6 | 43.0 | |||
| 600 | 24” | 610.0 | 9.52 | STD | 432.0 | 345.0 | 266.7 | 46.0 |
| 12.7 | X.S | 432.0 | 430.0 | 266.7 | 61.0 | |||
Dimensions and Weights of ASME B16.9 Monel Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)
| Buttweld Reducer Nominal Size |
Pipe Reducer Length H | Pipe Reducer Schedule T | Pipe Reducer Weight |
|
| mm | in | mm | Kg | |
| 20×15 | 3/4” x 1/2” | 38.1 | STD | 0.07 |
| XS | 0.1 | |||
| 25×15 | 1” x 1/2” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 25×20 | 1” x 3/4” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 32×15 | 11/4” x 1/2” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×20 | 11/4” x 3/4“ | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×25 | 11/4” x 1” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 40×15 | 11/2” x 1/2” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×20 | 11/2” x 3/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×25 | 11/2” x 1” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×32 | 11/2” x 11/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 50×15 | 2” x 1/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×20 | 2” x 3/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×25 | 2”x1” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×32 | 2” x 11/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×40 | 2” x 11/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 65×25 | 21/2” x 1” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×32 | 21/2” x 11/4” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×40 | 21/2” x 11/2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×50 | 21/2” x 2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 80×40 | 3” x 11/2” | 88.9 | STD | 0.77 |
| X.S | 1.09 | |||
| 80×50 | 3”x2” | 88.9 | STD | 0.91 |
| X.S | 1.22 | |||
| 80×65 | 3” x 21/2” | 88.9 | STD | 0.91 |
| X.S | 1.27 | |||
| 100×40 | 4” x 11/2” | 101.6 | STD | 1.36 |
| X.S | 1.91 | |||
| 100×50 | 4”x2” | 101.6 | STD | 1.40 |
| X.S | 1.95 | |||
| 100×65 | 4” x 21/2” | 101.6 | STD | 1.45 |
| X.S | 2.04 | |||
| 100×80 | 4”x3” | 101.6 | STD | 1.59 |
| X.S | 2.08 | |||
| 125×80 | 5”x3” | 127.0 | STD | 2.5 |
| X.S | 3.4 | |||
| 125 x 100 | 5”x4” | 127.0 | STD | 2.7 |
| X.S | 3.8 | |||
| 150×50 | 6”x2” | 140.0 | STD | 3.4 |
| X.S | 4.3 | |||
| 150×65 | 6” x 21/2” | 140.0 | STD | 3.4 |
| X.S | 4.5 | |||
| 150×80 | 6”x3” | 140.0 | STD | 3.6 |
| X.S | 4.8 | |||
| 150 x 100 | 6”x4” | 140.0 | STD | 3.7 |
| X.S | 5.2 | |||
| 150 x 125 | 6”x5” | 140.0 | STD | 3.9 |
| X.S | 5.4 | |||
| 200×80 | 8”x3” | 152.4 | STD | 4.5 |
| X.S | 7.2 | |||
| 200 x 100 | 8”x4” | 152.4 | STD | 5.0 |
| X.S | 7.7 | |||
| 200 x 125 | 8”x5” | 152.4 | STD | 5.4 |
| X.S | 8.2 | |||
| 200 x 150 | 8”x6” | 152.4 | STD | 5.9 |
| X.S | 8.6 | |||
| 250 x 100 | 10”x4” | 178.0 | STD | 9.1 |
| X.S | 11.8 | |||
| 250 x 125 | 10”x5” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 150 | 10”x6” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 200 | 10”x8” | 178.0 | STD | 10.0 |
| X.S | 14.0 | |||
| 300 x 150 | 12”x6” | 203.0 | STD | 14.1 |
| X.S | 18.1 | |||
| 300 x 200 | 12”x8” | 203.0 | STD | 14.5 |
| X.S | 19.1 | |||
| 300 x 250 | 12” x 10” | 203.0 | STD | 15.4 |
| X.S | 20.0 | |||
| 350 x 200 | 14”x8” | 330.0 | STD | 26.3 |
| X.S | 34.9 | |||
| 350 x 250 | 14” x 10” | 330.0 | STD | 27.2 |
| X.S | 36.3 | |||
| 350 x 300 | 14” x 12” | 330.0 | STD | 28.6 |
| X.S | 37.6 | |||
| 400 x 200 | 16”x8” | 356.0 | STD | 31.8 |
| X.S | 42.6 | |||
| 400 x 250 | 16” x 10” | 356.0 | STD | 33.1 |
| X.S | 43.5 | |||
| 400 x 300 | 16” x 12” | 356.0 | STD | 34.5 |
| X.S | 45.4 | |||
| 400 x 350 | 16” x 14” | 356.0 | STD | 35.4 |
| X.S | 46.3 | |||
| 450 x 250 | 18” x 10” | 381.0 | STD | 38.0 |
| X.S | 52.1 | |||
| 450 x 300 | 18” x 12” | 381.0 | STD | 39.0 |
| X.S | 53.5 | |||
| 450 x 350 | 18” x 14” | 381.0 | STD | 40.0 |
| X.S | 54.9 | |||
| 450 x 400 | 18” x 16” | 381.0 | STD | 40.8 |
| X.S | 53.5 | |||
| 500 x 250 | 20” x 10” | 508.0 | STD | 53.0 |
| X.S | 79.9 | |||
| 500 x 300 | 20” x 12” | 508.0 | STD | 54.4 |
| X.S | 82.0 | |||
| 500 x 350 | 20” x 14” | 508.0 | STD | 57.6 |
| X.S | 80.2 | |||
| 500 x 400 | 20” x 16” | 508.0 | STD | 58.9 |
| X.S | 82.0 | |||
| 500 x 450 | 20” x 18” | 508.0 | STD | 61.7 |
| X.S | 82.0 | |||
| 600 x 300 | 24” x 12” | 508.0 | STD | 63.5 |
| X.S | 84.4 | |||
| 600 x 350 | 24” x 14” | 508.0 | STD | 65.3 |
| X.S | 86.8 | |||
| 600 x 400 | 24” x 16” | 508.0 | STD | 68.0 |
| X.S | 90.4 | |||
| 600 x 450 | 24” x 18” | 508.0 | STD | 72.6 |
| X.S | 96.5 | |||
| 600 x 500 | 24” x 20” | 508.0 | STD | 77.1 |
| X.S | 102.5 | |||
Monel Buttweld Pipe Fittings Types
- Monel 90 Degree Elbow
- Monel 45 Degree Elbow
- Monel 180 Degree Elbow
- Monel 1D / 1.5D Elbow
- Monel 3D / 5D Elbow
- Monel Equal Tee
- Monel Unequal Tee / Reducing Tee
- Monel Lateral Tee
- Monel Long Radius Pipe Bend
- Monel Split Tee
- Monel Concentric Reducer
- Monel Eccentric Reducer
- Monel Equal Cross
- Monel Unequal Cross
- Monel Lap Joint Stub End
- Monel End Cap/ Pipe Cap
- Monel Piggable Bend
- Monel Hot Induction Pipe Bend
- Monel J PipeBend
- Monel Mitered Pipe Bend
- Monel U Pipe Bend
- Monel 3D Pipe Bend
- Monel 5D Pipe Bend
- Monel 8D Pipe Bend
- Monel 10D Pipe Bend
- Monel IBR Approved Buttweld Fittings
- Monel Hub and Clamp Connector
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
ASTM B366 Monel Buttweld Pipe Fittings – Applications & Industries
Oil & Gas Industries
Gas Processing Industries
Food Processing Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Sugar Industries
Fertilizers Industries
We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Monel Alloy Buttweld Pipe Fittings. We supply ANSI B16.9 Monel Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.
Ready Stock of Monel Pipe Fittings Export to
Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City
AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu
Please send us the complete details of Monel Pipe Fittings requirement. We offer Monel Buttweld Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have huge ready stock of Monel Buttweld Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end. Buy ASTM B366 Monel Pipe Fittingat a lowest price from us.
sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us