SS Butt weld Pipe Fittings, Stainless Steel Butt weld Pipe Fittings, SS Buttweld Fittings, SS Weldable Butt weld Fittings, SS Seamless Pipe Fittings Manufacturer in India.
Stainless Steel Pipe Fittings are weldable fittings that allow changes in flow direction to expand, reduce pipe estimates, or add auxiliary fittings. Metalfed Engineering is a renowned manufacturer, supplier, stockist and exporter of Stainless Steel Buttweld Fittings in India. We provide top quality products and an efficient after-sales service, which makes us a leading entity in this field, with a wide range of satisfied consumers in the national and international market. These fittings are manufactured in accordance with ANSI/ASME B16.9, which provide faster machining speeds, longer tool life, higher part quality, and lower total cost of parts machined. These tubes are manufactured using hot extrusion or cold extrusion processes, carried out by high-end machinery and experienced professionals.
The Stainless Steel Butt Weld Fittings are available as elbows, tees, caps, reducers and olets. These fittings are the most widely recognized type of welded fittings and are determined by the size of the pipe on the surface and the plane of the pipe. SS Butt Weld Pipe Fittings are manufactured (through various processes) from plain or welded pipe as starting material into shapes such as elbows, tees, and reducers. Similar to pipe being sold from Schedule 10 to Schedule 160, SS Butt Welded Pipe Fittings are sold similarly. These fittings are more typical in stainless steel due to cost advantages that the material offers.
Largest Stockholder of ASTM A403 SS Elbow, SS Equal Tee, Stainless Steel Pipe Elbow, Stainless Steel SR Elbow, Stainless Steel Buttweld Elbow, ASTM A403 SS Buttweld Fittingat best price in India.
The Butt Welded Pipe Fittings are manufactured through a thermoforming process that combines bending and forming. The starting material for butt welded pipe fittings is pipe cut to size by the die method, heated and molded into a specific shape. A heat treatment is also performed to relieve residual stress and obtain the desired mechanical properties. SS Butt Weld Fittings are available in sizes from 1/8” NB to 48” NB with SCH and other thickness features such as 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS and finally custom thickness. These stainless steel pipe fittings also include other grades, such as duplex stainless steel and super duplex stainless steel, which are in high demand throughout the country and abroad.
- Epoxy Coating
- Electro Polish
- Sand Blasting
- Intergranular Corrosion Test
- Tensile Test
- Hardness Test
- Good load bearing capacity
- Excellent versatility and weldability
- High tensile strength
Exporter of SS Buttweld Pipe Bend, SS Dish Cap, SS Two Joint Pipe Fittings, Stainless Buttweld Cross, Stainless Steel Butt weld Reducer, ASME SA403 SS Collar Pipe Fittings, ANSI B16.9 SS Buttweld Pipe Cap, Stainless Steel Long Stub End.
Stainless Steel Buttweld Fittings Specifications
| Product Name: | SS Buttweld Pipe Fittings |
| Specifications: | ASTM A403 , ASME SA 403 |
| size range: | Welded Fittings:1/2″ – 48″ Seamless Fittings: 1/2″ – 10″ in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
| Dimensions: | ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10 |
| SS 304 Pipe Fittings Types: | Seamless / Welded / Fabricated |
| Thickness: | SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75 |
| Bending Radius: | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Stainless Steel Pipe Fitting |
| Elbows: | Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO |
| Manufacturing process: | Forge, Cast, Push, Press, etc. |
| Key markets and industries: | Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless). |
| Test Certificates (TC): | Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc |
| Material Test Certificates (MTC): | As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175 |
| Uses & Application: | SS 304/304L Pipe Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications. |
Stainless Steel Buttweld Pipe Fittings Size Range
| Below Mentioned Pipe Fitting Size: 1/2″ – 48″ | |
| ASTM A403 SS Elbow – Long Radius | ASTM A403 SS Stub Ends |
| ASTM A403 SS Elbow – Short Radius | ASTM A403 SS Cross |
| ASTM A403 SS Reducing Elbow | ASTM A403 SS Reducing Cross |
| ASTM A403 SS 45° Elbow | ASTM A403 SS Tees |
| SS ASTM A403 Fabricated Tee | ASTM A403 SS End Cap |
| ASTM A403 SS Reducer | ASTM A403 SS Coupling |
| ASTM A403 SS Concentric Reducer | ASTM A403 SS Pipe Nipple |
| SS ASTM A403 SS Eccentric Reducer | ASTM A403 SS 5D Elbow |
| ASTM A403 SS 3D Elbow | ASTM A403 SS Welded Pipe Fittings |
Stainless Steel Buttweld Fittings Standards
|
JIS B2311/B2312 Fittings, Japanese Steel Pipe Fittings Standard (All Sizes are welded) This JIS B2311 Fittings Standard specifies the nickel-chromium ferro-alloy seamless pipe fittings and steel and to be fitted by butt-welding , generally pressure service pipings, high pressure service pipings, high pressure service pipings , low temperature service pipings, high temperature service pipings, high temperature service pipings , alloy steel pipings stainless steel pipings, and steel pipes for fired heaters. |
||
| Standard Code | Standard Name | |
| JIS B2311 | JIS B2311 Reducer, Elbow SR JIS B2311 BW, Universal steel butt-welding pipe fittings | |
| JIS B2312 | JIS B2312 Reducer, JIS B2312 Elbow,Steel butt-welding pipe fittings | |
| JIS B2313 | JIS B2313 Fittings, Steel plate butt-welding pipe fittings | |
| Materials | JIS BW fittings are made from materials in accordance with JIS G3452. | |
| Pressure Ratings | JIS B2311/B2312 Buttweld Pipe fittings are free from leakage at hydrostatic pressure up to a maximum of 2.5 MPa. | |
| JIS B2312-82 Fittings Applications | JIS G3452 mostly used for ordinary piping in oil, gas,steam, water, etc at low pressures. | |
| American Steel Pipe Fittings Standard | ||
| ANSI ASME SA-403 | Forged Durimet pipe fittings | |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings | |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns | |
| ISO 5251 | Stainless steel butt-welding fittings | |
| MSS SP-43 | Wrought stainless steel butt-welding fittings | |
| MSS SP-75 | Forging butt-welding fittings | |
| German Steel Pipe Fittings Standard | ||
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends | |
| DIN 2615 | Steel butt-welding pipe fittings.tees | |
| DIN 2616 | Steel butt-welding pipe fittings.reducers | |
| DIN 2617 | Steel butt-welding pipe fittings.caps | |
| Other Steel Pipe Fittings Standard | ||
| EN 1025 | 3 Butt-welding pipe fittings | |
SS Buttweld Fittings Dimensional Tolerances
Cross-sectional Tolerances for all ASME/ANSI B16.9 and B16.28 Buttwelding Fittings
| Nominal Pipe Size (NPS) | All Fittings | ||||
| OD at Bevel | ID at Bevel ± | Wall thickness | |||
| in | mm | in | mm | ||
| ½ to 2½ | +0.06, -0.03 | +1.6, -0.8 | 0.03 | 0.8 | Not less than 87.5% of nominal wall thickness |
| 3 to 3½ | ±0.6 | ±1.6 | 0.06 | 1.6 | |
| 4 | ±0.6 | ±1.6 | 0.06 | 1.6 | |
| 5 to 6 | +0.09, -0.06 | +2.4, -1.6 | 0.06 | 1.6 | |
| 8 | +0.09, -0.06 | +2.4, -1.6 | 0.06 | 1.6 | |
| 10 | +0.16, -0.12 | +4.0, -3.2 | 0.12 | 3.2 | |
| 12 to 18 | +0.16, -0.12 | +4.0, -3.2 | 0.12 | 3.2 | |
| 20 to 24 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
| 26 to 30 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
| 32 to 48 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
Stainless Steel Buttweld Tolerances for Specific Buttweld Fittings
Stainless Steel Pipe Fttings Dimensional Tolerances for ASME/ANSI B16.9 & B16.28 Elbows and Returns
| Nominal Pipe Size (NPS) | 90° & 45° Long Radius Elbows 90° Short Radius Elbows and Tees |
180° Returns | ||||
| Centre-to-End Dimension ± A, B |
Centre-to-Centre Dimension ± B (=2 x A) |
Back-to-Face Dimension ± C |
||||
| in | mm | in | mm | in | mm | |
| ½ to 2½ | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 3 to 3½ | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 4 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 5 to 6 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 8 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 10 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 12 to 18 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 20 to 24 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 26 to 30 | 0.12 | 3 | – | – | – | – |
| 32 to 48 | 0.19 | 5 | – | – | – | – |
Stainless Steel Buttweld Fittings Dimensional Tolerances for ASME/ANSI B16.9 Reducers, Caps and Stub Ends
| Nominal Pipe Size (NPS) | Reducers & Lap Joint Stub Ends |
Caps | Lap Joint Stub Ends | |||||
| Overall Length ± A |
Overall Length ± A |
OD of Lap B |
Fillet Radius of Lap B |
|||||
| in | mm | in | mm | in | mm | in | mm | |
| ½ to 2½ | 0.06 | 2 | 0.12 | 3 | +0 | +0, -1 | +0 | +0, -1 |
| 3 to 3½ | 0.06 | 2 | 0.12 | 3 | +0, -0.03 | +0, -1 | +0, -0.03 | +0, -1 |
| 4 | 0.06 | 2 | 0.12 | 3 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 5 to 6 | 0.06 | 2 | 0.25 | 6 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 8 | 0.06 | 2 | 0.25 | 6 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 10 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 12 to 18 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 20 to 24 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 26 to 30 | 0.19 | 5 | 0.38 | 10 | – | – | – | – |
| 32 to 48 | 0.19 | 5 | 0.38 | 10 | – | – | – | – |
Stainless Steel Buttweld Fittings Alignment Tolerances
Alignment tolerances are concerned with the way that the ends of a fitting are cut. Exaggerated distortions are shown for clarity in the diagram above.
SS Buttweld Pipe Fittings Alignment Tolerances (ASME/ANSI B16.9)
| Nominal Pipe Size (NPS) | Off Plane Tolerances, ± A |
Off Angle Tolerances, ± B |
Alignment of Ends, ± C |
|||
| in | mm | in | mm | in | mm | |
| ½ to 4 | 0.06 | 2 | 0.03 | 1 | 0.03 | 1 |
| 5 to 8 | 0.12 | 4 | 0.06 | 2 | 0.03 | 1 |
| 10 to 12 | 0.19 | 5 | 0.09 | 2 | 0.06 | 2 |
| 14 to 16 | 0.25 | 6 | 0.09 | 3 | 0.06 | 2 |
| 18 to 24 | 0.38 | 10 | 0.12 | 4 | 0.06 | 2 |
| 26 to 30 | 0.38 | 10 | 0.19 | 5 | – | – |
| 32 to 42 | 0.50 | 13 | 0.19 | 5 | – | – |
| 44 to 48 | 0.75 | 19 | 0.19 | 5 | – | – |
Dimensions and Tolerances of ASTM A403 Stainless Steel Pipe Fittings (MSS SP-43)
The tolerances and dimensions defined in MSS SP-43 are substantially the same as defined in ASME/ANSI specifications (½ to 24 in). MSS SP-43 only covers ss buttweld fittings made for use with Schedule 10S and 5S pipe as defined in ANSI/ASME B36.19M also it covers short pattern stub ends suitable for use with Schedule 40S pipe.
- MSS SP-43 tolerances are the same as for ASME/ANSI B16.9 and B16.28 except with regard to the outside diameter at the bevel:
- Tolerance of OD at Bevel =
- ± 0.03 in for NPS ½ to 4
- +0.06, -0.03 in for NPS 5 to 8
- +0.09, -0.03 in for NPS 10 to 18
- +0.12, to -0.03 in for NPS 20 to 24
ASTM A403 SS Buttweld Fittings Dimensions
Dimensions and weights of ASME B16.9 Stainless Steel Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)
| Pipe Elbow Nominal Size | Pipe Elbow Outside Diameter Y |
Wall Thickness T (Pipe Elbow Schedule) |
45 Deg. Elbow LR Centre to Face B | 45 Deg. Elbow LR Weight |
90 Deg. Elbow LR Centre to Face A | 90 Deg. Elbow LR Weight | 90 Deg. Elbow SR Centre to Face A | 90 Deg. Elbow SR Weight | ||
| mm | in | mm | mm | Schedule | mm | kg | mm | kg | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
| 3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
| 20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
| 3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
| 25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
| 4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
| 4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
| 5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
| 5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
| 7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
| 7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
| 8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
| 9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
| 10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
| 12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
| 250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
| 12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
| 12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
| 12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
| 12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
| 12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
| 12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
| 600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
| 12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 | |||
Dimensions and weights of ASME B16.9 Stainless Steel Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)
| Buttweld Tee and Cap Nominal Size |
Pipe Tee and Cap Outside Diameter Y |
Pipe Tee and Cap Wall Thickness T |
Buttweld Tee Dimensions (C and M) |
Buttweld Tee Weight |
Buttweld Cap End to End |
Buttweld Cap Weight |
||
| mm | in | mm | mm | Schedule | mm | mm | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 25.4 | 0.58 | ||
| 3.73 | X.S | 25.4 | 0.21 | |||||
| 20 | 3/4” | 26.7 | 2.87 | STD | 28.6 | 0.21 | ||
| 3.91 | X.S | 28.6 | 0.27 | |||||
| 25 | 1” | 33.4 | 3.38 | STD | 38.1 | 0.34 | 38.1 | 0.1 |
| 4.55 | X.S | 38.1 | 0.43 | 38.1 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 47.6 | 0.64 | 38.1 | 0.14 |
| 4.85 | X.S | 47.6 | 0.75 | 38.1 | 0.18 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 57.1 | 0.95 | 38.1 | 0.18 |
| 5.08 | X.S | 57.1 | 1.13 | 38.1 | 0.23 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 63.5 | 1.45 | 38.1 | 0.27 |
| 5.54 | X.S | 63.5 | 1.72 | 38.1 | 0.32 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 76.2 | 2.45 | 38.1 | 0.41 |
| 7.01 | X.S | 76.2 | 2.95 | 38.1 | 0.45 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 85.7 | 3.45 | 50.8 | 0.64 |
| 7.62 | X.S | 85.7 | 4.3 | 50.8 | 0.82 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 105.0 | 5.7 | 63.5 | 1.13 |
| 8.56 | X.S | 105.0 | 7.3 | 63.5 | 1.54 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 124.0 | 9.1 | 76.2 | 1.91 |
| 9.5 | X.S | 124.0 | 11.8 | 76.2 | 2.59 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 143.0 | 13.6 | 88.9 | 2.95 |
| 10.97 | X.S | 143.0 | 19.0 | 88.9 | 4.1 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 178.0 | 25.0 | 101.6 | 5.0 |
| 12.7 | X.S | 178.0 | 33.5 | 101.6 | 7.3 | |||
| 250 | 10” | 273.0 | 9.27 | STD | 216.0 | 41.0 | 127.0 | 9.1 |
| 12.7 | X.S | 216.0 | 54.0 | 127.0 | 12.0 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 254.0 | 57.0 | 152.4 | 13.6 |
| 12.7 | X.S | 254.0 | 77.0 | 152.4 | 17.0 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 279.0 | 73.0 | 165.1 | 15.9 |
| 12.7 | X.S | 279.0 | 93.0 | 165.1 | 21.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 305.0 | 91.0 | 178.8 | 20.0 |
| 12.7 | X.S | 305.0 | 120.0 | 178.8 | 26.0 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 343.0 | 127.0 | 203.2 | 26.0 |
| 12.7 | X.S | 343.0 | 165.0 | 203.2 | 34.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 381.0 | 227.0 | 228.6 | 33.0 |
| 12.7 | X.S | 381.0 | 270.0 | 228.6 | 43.0 | |||
| 600 | 24” | 610.0 | 9.52 | STD | 432.0 | 345.0 | 266.7 | 46.0 |
| 12.7 | X.S | 432.0 | 430.0 | 266.7 | 61.0 | |||
Dimensions and Weights of ASME B16.9 Stainless Steel Buttweld Concentric Reduce rs and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)
| Buttweld Reducer Nominal Size |
Pipe Reducer Length H | Pipe Reducer Schedule T | Pipe Reducer Weight |
|
| mm | in | mm | Kg | |
| 20×15 | 3/4” x 1/2” | 38.1 | STD | 0.07 |
| XS | 0.1 | |||
| 25×15 | 1” x 1/2” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 25×20 | 1” x 3/4” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 32×15 | 11/4” x 1/2” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×20 | 11/4” x 3/4“ | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×25 | 11/4” x 1” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 40×15 | 11/2” x 1/2” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×20 | 11/2” x 3/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×25 | 11/2” x 1” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×32 | 11/2” x 11/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 50×15 | 2” x 1/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×20 | 2” x 3/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×25 | 2”x1” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×32 | 2” x 11/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×40 | 2” x 11/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 65×25 | 21/2” x 1” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×32 | 21/2” x 11/4” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×40 | 21/2” x 11/2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×50 | 21/2” x 2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 80×40 | 3” x 11/2” | 88.9 | STD | 0.77 |
| X.S | 1.09 | |||
| 80×50 | 3”x2” | 88.9 | STD | 0.91 |
| X.S | 1.22 | |||
| 80×65 | 3” x 21/2” | 88.9 | STD | 0.91 |
| X.S | 1.27 | |||
| 100×40 | 4” x 11/2” | 101.6 | STD | 1.36 |
| X.S | 1.91 | |||
| 100×50 | 4”x2” | 101.6 | STD | 1.40 |
| X.S | 1.95 | |||
| 100×65 | 4” x 21/2” | 101.6 | STD | 1.45 |
| X.S | 2.04 | |||
| 100×80 | 4”x3” | 101.6 | STD | 1.59 |
| X.S | 2.08 | |||
| 125×80 | 5”x3” | 127.0 | STD | 2.5 |
| X.S | 3.4 | |||
| 125 x 100 | 5”x4” | 127.0 | STD | 2.7 |
| X.S | 3.8 | |||
| 150×50 | 6”x2” | 140.0 | STD | 3.4 |
| X.S | 4.3 | |||
| 150×65 | 6” x 21/2” | 140.0 | STD | 3.4 |
| X.S | 4.5 | |||
| 150×80 | 6”x3” | 140.0 | STD | 3.6 |
| X.S | 4.8 | |||
| 150 x 100 | 6”x4” | 140.0 | STD | 3.7 |
| X.S | 5.2 | |||
| 150 x 125 | 6”x5” | 140.0 | STD | 3.9 |
| X.S | 5.4 | |||
| 200×80 | 8”x3” | 152.4 | STD | 4.5 |
| X.S | 7.2 | |||
| 200 x 100 | 8”x4” | 152.4 | STD | 5.0 |
| X.S | 7.7 | |||
| 200 x 125 | 8”x5” | 152.4 | STD | 5.4 |
| X.S | 8.2 | |||
| 200 x 150 | 8”x6” | 152.4 | STD | 5.9 |
| X.S | 8.6 | |||
| 250 x 100 | 10”x4” | 178.0 | STD | 9.1 |
| X.S | 11.8 | |||
| 250 x 125 | 10”x5” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 150 | 10”x6” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 200 | 10”x8” | 178.0 | STD | 10.0 |
| X.S | 14.0 | |||
| 300 x 150 | 12”x6” | 203.0 | STD | 14.1 |
| X.S | 18.1 | |||
| 300 x 200 | 12”x8” | 203.0 | STD | 14.5 |
| X.S | 19.1 | |||
| 300 x 250 | 12” x 10” | 203.0 | STD | 15.4 |
| X.S | 20.0 | |||
| 350 x 200 | 14”x8” | 330.0 | STD | 26.3 |
| X.S | 34.9 | |||
| 350 x 250 | 14” x 10” | 330.0 | STD | 27.2 |
| X.S | 36.3 | |||
| 350 x 300 | 14” x 12” | 330.0 | STD | 28.6 |
| X.S | 37.6 | |||
| 400 x 200 | 16”x8” | 356.0 | STD | 31.8 |
| X.S | 42.6 | |||
| 400 x 250 | 16” x 10” | 356.0 | STD | 33.1 |
| X.S | 43.5 | |||
| 400 x 300 | 16” x 12” | 356.0 | STD | 34.5 |
| X.S | 45.4 | |||
| 400 x 350 | 16” x 14” | 356.0 | STD | 35.4 |
| X.S | 46.3 | |||
| 450 x 250 | 18” x 10” | 381.0 | STD | 38.0 |
| X.S | 52.1 | |||
| 450 x 300 | 18” x 12” | 381.0 | STD | 39.0 |
| X.S | 53.5 | |||
| 450 x 350 | 18” x 14” | 381.0 | STD | 40.0 |
| X.S | 54.9 | |||
| 450 x 400 | 18” x 16” | 381.0 | STD | 40.8 |
| X.S | 53.5 | |||
| 500 x 250 | 20” x 10” | 508.0 | STD | 53.0 |
| X.S | 79.9 | |||
| 500 x 300 | 20” x 12” | 508.0 | STD | 54.4 |
| X.S | 82.0 | |||
| 500 x 350 | 20” x 14” | 508.0 | STD | 57.6 |
| X.S | 80.2 | |||
| 500 x 400 | 20” x 16” | 508.0 | STD | 58.9 |
| X.S | 82.0 | |||
| 500 x 450 | 20” x 18” | 508.0 | STD | 61.7 |
| X.S | 82.0 | |||
| 600 x 300 | 24” x 12” | 508.0 | STD | 63.5 |
| X.S | 84.4 | |||
| 600 x 350 | 24” x 14” | 508.0 | STD | 65.3 |
| X.S | 86.8 | |||
| 600 x 400 | 24” x 16” | 508.0 | STD | 68.0 |
| X.S | 90.4 | |||
| 600 x 450 | 24” x 18” | 508.0 | STD | 72.6 |
| X.S | 96.5 | |||
| 600 x 500 | 24” x 20” | 508.0 | STD | 77.1 |
| X.S | 102.5 | |||
Stainless Steel Pipe Fittings Types
90 Degree Elbow
Stainless Steel 90 Degree Elbow
Price: $600.00-$1,000.00 / Ton
45 Degree Elbow
Stainless Steel 45 Degree Elbow
Price: $10-$60 / Kilogram
180 Degree Elbow
Stainless Steel 180 Degree Elbow
Price: $1-$40.00 / Piece
1D / 1.5D Elbow
Stainless Steel 1D/1.5D Elbow / Bends
Price: $20-$40.00 / Piece
3D / 5D Elbow
Stainless Steel 3D/5D Elbow / Bends
Price: $600.00-$1,000.00 / Ton
Equal Tee
Stainless Steel Equal Tee
Price: $500.00-$1200.00 / Ton
Unequal Tee / Reducing Tee
Stainless Steel Unequal or Reducing Tee
Price: $10-$60.00 / Kilogram
Lateral Tee
Stainless Steel Lateral Tee
Price: $400.00-$900.00 / Ton
Long Radius Pipe Bend
Stainless Steel Long Radius Pipe Bend
Price: $10-$100.00 / Kilogram
Split Tee
Stainless Steel Split Tee
Price: $200.00-$1200.00 / Ton
Concentric Reducer
Stainless Steel Concentric Reducer
Price: $500.00-$1,000.00 / Ton
Eccentric Reducer
Stainless Steel Eccentric Reducer
Price: $400.00-$1300.00 / Ton
Equal Cross
Stainless Steel Equal Cross
Price: $10-$40.00 / Piece
Unequal Cross
Stainless Steel Unequal Cross
Price: $600.00-$1,000.00 / Ton
Lap Joint Stub End
Stainless Steel Lap Joint Stub End
Price: $700.00-$1400.00 / Ton
End Cap/ Pipe Cap
Stainless Steel Pipe End Caps
Price: $30-$80.00 / Kilogram
Piggable Bend
Stainless Steel Piggable Bend
Price: $600.00-$1,000.00 / Ton
Hot Induction Pipe Bend
Stainless Steel Hot Induction Pipe Bend
Price: $10-$40.00 / Piece
J PipeBend
Stainless Steel J Pipe Bend
Price: $20-$90.00 / Kilogram
Mitered Pipe Bend
Stainless Steel Mitered Pipe Bend
Price: $600.00-$1,000.00 / Ton
U Pipe Bend
Stainless Steel U Pipe Bend
Price: $10-$40.00 / Piece
3D Pipe Bend
Stainless Steel 3D Pipe Bend
Price: $30-$80.00 / Kilogram
5D Pipe Bend
Stainless Steel 5D Pipe Bend
Price: $600.00-$1,000.00 / Ton
8D Pipe Bend
Stainless Steel 8D Pipe Bend
Price: $10-$40.00 / Piece
10D Pipe Bend
Stainless Steel 10D Pipe Bend
Price: $30-$80.00 / Kilogram
IBR Approved Buttweld Fittings
Stainless Steel IBR Approved Fittings
Price: $600.00-$1,000.00 / Ton
Hub and Clamp Connector Fittings
Stainless Steel Hub and Clamp Connector Fittings
Price: $300-$800 / Ton
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
ASTM A403 SS Buttweld Pipe Fittings – Applications & Industries
Oil & Gas Industries
Gas Processing Industries
Food Processing Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Sugar Industries
Fertilizers Industries
We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Stainless Steel Buttweld Pipe Fittings. We supply ANSI B16.9 SS Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.
Ready Stock of Stainless Steel Pipe Fittings Export to
Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City
AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu
Please send us the complete details of Stainless Steel Buttweld Pipe Fittings requirement. We offer SS Pipe Fittings, and ASTM A403 Buttweld Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have a team of highly skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these SS Buttweld Elbow, Tee, ASTM A403 Reducer, Bend, Cross, ASTM A403 End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end.
sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us
Venezuela
Myanmar
Sri Lanka
Belgium
Czechia
Greece
Mexico
Tobago
Brazil
Chile
France
Colombia
South Africa
Jordan
Spain
Hong Kong
Netherlands
Poland
Bangladesh
Indonesia
Taiwan
Nigeria
Iraq
Ukraine
Romania
Cyprus
Angola
Norway
USA
Saudi Arabia
Kuwait
Thailand
South Korea
Singapore
Malaysia
UAE
Germany
Italy
Costa Rica
Kazakhstan
Philippines
China
UK
India
Japan
Russia
Canada
Iran
Turkey
Morocco
Egypt
Vietnam
Oman
Australia
Qatar
Portugal