ASTM A403 WP316H Buttweld Pipe Fittings Supplier in India, Manufacturer of Stainless Steel 316H Pipe Fitting, SS 316H Buttweld Fittings Exporter
Metalfed Engineering is a well known manufacturer, supplier and exporter of ASTM A403 WP316H Buttweld Fitting. Our high-quality products and efficient after-sales service have made us a leading entity in this field with a wide range of satisfied consumers in the national and international market. Our products are sold to different countries and regions; the most common ones are UK, Germany, Netherlands, France, Nigeria, Egypt, South Africa, United Arab Emirates, Saudi Arabia, Qatar, Indonesia, Japan, Taiwan, Singapore, Australia, etc.The Stainless Steel 316H Butt Welded Pipe Fittings are austenitic grades of steel that provide higher tensile and yield strength, higher short and long-term creep properties, and heat resistance due to higher carbon content.
The Stainless Steel 316H Pipe Fittings are used in many industries such as natural gas, petrochemical and chemical industries. These ASTM A403 Grade 316H buttweld fittings are known to resist atmospheric corrosion as well as moderate oxidizing and reducing environments. This grade 316h stainless steel pipe fitting is also known for its ability to resist corrosion in polluted marine environments. In addition to this, 316H Stainless Steel Buttweld Fittings are more suitable for applications where high or low temperatures are present due to their high tensile strength and better yield strength.
Recoganized Manufacturer of ASTM A403 WP316H Pipe Elbow, ASTM A403 Grade WP316H Pipe Bends, Reducer, Stub Ends, ASTM A403 Gr WP316H End Caps, Collar, Pipe Nipple in all Dimensions and Sizes.
- Stainless Steel 316H Pipe Fittings Specifications
- Stainless Steel 316H Pipe Fittings Equivalent Grades
- SS 316H Pipe Fittings Chemical Composition
- Stainless Steel 316H Pipe Fittings Mechanical Properties
- ASTM A403 WP316H Pipe Fittings Size Range
- SS 316H Buttweld Pipe Fittings Manufacturing Standards
- ASTM A403 WP316H Pipe Fittings Dimensional Tolerances
- SS 316H Buttweld Tolerances For Specific Fittings
- ASTM A403 Grade WP316H Buttweld Fittings Alignment Tolerances
- MSS SP-43 SS 316H Buttweld Fittings Dimensions and Tolerances
- Stainless Steel 316H Pipe Fittings Dimensions
- ASTM A403 Gr WP316H Buttweld Fittings Applications
- Stainless Steel 316H Pipe Fittings Exports to
- SS 316H Pipe Fittings Types and Prices
The Stainless Steel 316H Butt Welded Pipe Fittings are a must-have product when there is a need to connect or disconnect non-working pipes or tubes. It is the most demanded industrial product category. They also have a high carbon content for excellent chemical resistance. Furthermore, they are equally resistant to oxidative and reducing environments. The Stainless Steel 316H Buttweld Fittings are composed in low temperature environments, for which they have excellent strength. These pipe fittings have an exponential versatile base and are made up of different chemical compounds, which makes it one of the most highly rated and preferred industrial products by several industry experts.
- Epoxy Coating
- Electro Polish
- Sand Blasting
- Intergranular Corrosion Test
- Tensile Test
- Hardness Test
- Good load bearing capacity
- Excellent versatility and weldability
- High tensile strength
Stockholder of ASTM A403 WP316H Pipe Fittingts, WERKSTOFF NR. 1.4301 Seamless Pipe Fittings, ASME SA403 SS 316H Welded Pipe Fittings, ASTM A403 WP316H Equal Tee, Stainless Steel 316H Long / Short Radius Elbow at Best Prices in India.
Stainless Steel 316H Buttweld Fittings Specifications
| Product Name: | SS 316H Buttweld Pipe Fittings |
| Specifications: | ASTM A403 WP316H , ASME SA 403 WP316H |
| size range: | Welded Fittings:1/2″ – 48″ Seamless Fittings: 1/2″ – 10″ in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
| Dimensions: | ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10 |
| SS 316H Pipe Fittings Types: | Seamless / Welded / Fabricated |
| Thickness: | SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75 |
| Bending Radius: | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Stainless Steel Pipe Fitting |
| Elbows: | Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO |
| Manufacturing process: | Forge, Cast, Push, Press, etc. |
| Key markets and industries: | Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless). |
| Test Certificates (TC): | Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc |
| Material Test Certificates (MTC): | As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175 |
| Uses & Application: | SS 316H Pipe Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications. |
ASTM A403 WP316H Buttweld Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316H | 1.4401 | S31609 | – | – | – | – | – |
SS 316H Pipe Fittings Chemical Composition
| Grade | C | Mo | Ni | Si | P | Mn | S | Cr | N | |
| SS 316H | Min | 0.04 | 2.00 | 10.0 | 0 | – | 0.04 | – | 16.0 | – |
| max | 0.10 | 3.00 | 14.0 | 0.75 | 0.045 | 0.10 | 0.03 | 18.0 | – | |
ASTM A403 Gr 316H Pipe Fittings Mechanical Properties
| Grade | Yield Strength 0.2% Proof (MPa) min | Tensile Strength (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316H | 205 | 515 | 40% | 95 | 217 |
Stainless Steel 316H Buttweld Pipe Fittings Size Range
| Below Mentioned SS 316H Pipe Fitting Size: 1/2″ – 48″ | |
| ASTM A403 WP316H SS Elbow – Long Radius | ASTM A403 WP316H SS Stub Ends |
| ASTM A403 Gr WP316H SS Elbow – Short Radius | ASTM A403 WP316H SS Cross |
| ASTM A403 WP316H SS Reducing Elbow | ASTM A403 WP316H SS Reducing Cross |
| ASTM A403 Grade WP316H SS 45° Elbow | ASTM A403 WP316H SS Tees |
| SS ASTM A403 WP316H Fabricated Tee | ASTM A403 WP316H SS End Cap |
| ASTM A403 GR WP316H SS Reducer | ASTM A403 WP316H Coupling |
| ASTM A403 WP316H SS Concentric Reducer | ASTM A403 WP316H SS Pipe Nipple |
| SS ASTM A403 WP316H Eccentric Reducer | ASTM A403 WP316H SS 5D Elbow |
| ASTM A403 WP316H SS 3D Elbow | ASTM A403 WP316H SS Welded Pipe Fittings |
316H Stainless Steel Buttweld Fittings Standards
|
JIS B2311/B2312 Fittings, Japanese Steel Pipe Fittings Standard (All Sizes are welded) This JIS B2311 Fittings Standard specifies the nickel-chromium ferro-alloy seamless pipe fittings and steel and to be fitted by butt-welding , generally pressure service pipings, high pressure service pipings, high pressure service pipings , low temperature service pipings, high temperature service pipings, high temperature service pipings , alloy steel pipings stainless steel pipings, and steel pipes for fired heaters. |
||
| Standard Code | Standard Name | |
| JIS B2311 | JIS B2311 Reducer, Elbow SR JIS B2311 BW, Universal steel butt-welding pipe fittings | |
| JIS B2312 | JIS B2312 Reducer, JIS B2312 Elbow,Steel butt-welding pipe fittings | |
| JIS B2313 | JIS B2313 Fittings, Steel plate butt-welding pipe fittings | |
| Materials | JIS BW fittings are made from materials in accordance with JIS G3452. | |
| Pressure Ratings | JIS B2311/B2312 Buttweld Pipe fittings are free from leakage at hydrostatic pressure up to a maximum of 2.5 MPa. | |
| JIS B2312-82 Fittings Applications | JIS G3452 mostly used for ordinary piping in oil, gas,steam, water, etc at low pressures. | |
| American Steel Pipe Fittings Standard | ||
| ANSI ASME SA-403 | Forged Durimet pipe fittings | |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings | |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns | |
| ISO 5251 | Stainless steel butt-welding fittings | |
| MSS SP-43 | Wrought stainless steel butt-welding fittings | |
| MSS SP-75 | Forging butt-welding fittings | |
| German Steel Pipe Fittings Standard | ||
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends | |
| DIN 2615 | Steel butt-welding pipe fittings.tees | |
| DIN 2616 | Steel butt-welding pipe fittings.reducers | |
| DIN 2617 | Steel butt-welding pipe fittings.caps | |
| Other Steel Pipe Fittings Standard | ||
| EN 1025 | 3 Butt-welding pipe fittings | |
SS 316H Buttweld Fittings Dimensional Tolerances
Cross-sectional Tolerances for all ASME/ANSI B16.9 and B16.28 Buttwelding Fittings
| Nominal Pipe Size (NPS) | All Fittings | ||||
| OD at Bevel | ID at Bevel ± | Wall thickness | |||
| in | mm | in | mm | ||
| ½ to 2½ | +0.06, -0.03 | +1.6, -0.8 | 0.03 | 0.8 | Not less than 87.5% of nominal wall thickness |
| 3 to 3½ | ±0.6 | ±1.6 | 0.06 | 1.6 | |
| 4 | ±0.6 | ±1.6 | 0.06 | 1.6 | |
| 5 to 6 | +0.09, -0.06 | +2.4, -1.6 | 0.06 | 1.6 | |
| 8 | +0.09, -0.06 | +2.4, -1.6 | 0.06 | 1.6 | |
| 10 | +0.16, -0.12 | +4.0, -3.2 | 0.12 | 3.2 | |
| 12 to 18 | +0.16, -0.12 | +4.0, -3.2 | 0.12 | 3.2 | |
| 20 to 24 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
| 26 to 30 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
| 32 to 48 | +0.25, -0.19 | +6.4, -4.8 | 0.19 | 4.8 | |
Stainless Steel 316H Buttweld Tolerances for Specific Buttweld Fittings
Stainless Steel 316H Dimensional Tolerances for ASME/ANSI B16.9 & B16.28 Elbows and Returns
| Nominal Pipe Size (NPS) | 90° & 45° Long Radius Elbows 90° Short Radius Elbows and Tees |
180° Returns | ||||
| Centre-to-End Dimension ± A, B |
Centre-to-Centre Dimension ± B (=2 x A) |
Back-to-Face Dimension ± C |
||||
| in | mm | in | mm | in | mm | |
| ½ to 2½ | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 3 to 3½ | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 4 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 5 to 6 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 8 | 0.06 | 2 | 0.25 | 6 | 0.25 | 6 |
| 10 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 12 to 18 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 20 to 24 | 0.09 | 2 | 0.38 | 10 | 0.25 | 6 |
| 26 to 30 | 0.12 | 3 | – | – | – | – |
| 32 to 48 | 0.19 | 5 | – | – | – | – |
Stainless Steel 316H Buttweld Fittings Dimensional Tolerances for ASME/ANSI B16.9 Reducers, Caps and Stub Ends
| Nominal Pipe Size (NPS) | Reducers & Lap Joint Stub Ends |
Caps | Lap Joint Stub Ends | |||||
| Overall Length ± A |
Overall Length ± A |
OD of Lap B |
Fillet Radius of Lap B |
|||||
| in | mm | in | mm | in | mm | in | mm | |
| ½ to 2½ | 0.06 | 2 | 0.12 | 3 | +0 | +0, -1 | +0 | +0, -1 |
| 3 to 3½ | 0.06 | 2 | 0.12 | 3 | +0, -0.03 | +0, -1 | +0, -0.03 | +0, -1 |
| 4 | 0.06 | 2 | 0.12 | 3 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 5 to 6 | 0.06 | 2 | 0.25 | 6 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 8 | 0.06 | 2 | 0.25 | 6 | +0, -0.03 | +0, -1 | +0, -0.06 | +0, -2 |
| 10 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 12 to 18 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 20 to 24 | 0.09 | 2 | 0.25 | 6 | +0, -0.06 | +0, -2 | +0, -0.06 | +0, -2 |
| 26 to 30 | 0.19 | 5 | 0.38 | 10 | – | – | – | – |
| 32 to 48 | 0.19 | 5 | 0.38 | 10 | – | – | – | – |
Stainless Steel 316H Buttweld Fittings Alignment Tolerances
Alignment tolerances are concerned with the way that the ends of a fitting are cut. Exaggerated distortions are shown for clarity in the diagram above.
SS ASTM A403 WP316H Buttweld Pipe Fittings Alignment Tolerances (ASME/ANSI B16.9)
| Nominal Pipe Size (NPS) | Off Plane Tolerances, ± A |
Off Angle Tolerances, ± B |
Alignment of Ends, ± C |
|||
| in | mm | in | mm | in | mm | |
| ½ to 4 | 0.06 | 2 | 0.03 | 1 | 0.03 | 1 |
| 5 to 8 | 0.12 | 4 | 0.06 | 2 | 0.03 | 1 |
| 10 to 12 | 0.19 | 5 | 0.09 | 2 | 0.06 | 2 |
| 14 to 16 | 0.25 | 6 | 0.09 | 3 | 0.06 | 2 |
| 18 to 24 | 0.38 | 10 | 0.12 | 4 | 0.06 | 2 |
| 26 to 30 | 0.38 | 10 | 0.19 | 5 | – | – |
| 32 to 42 | 0.50 | 13 | 0.19 | 5 | – | – |
| 44 to 48 | 0.75 | 19 | 0.19 | 5 | – | – |
Dimensions and Tolerances of ASTM A403 WP316H Stainless Steel Pipe Fittings (MSS SP-43)
The tolerances and dimensions defined in MSS SP-43 are substantially the same as defined in ASME/ANSI specifications (½ to 24 in). MSS SP-43 only covers ss 316H Buttweld fittings made for use with Schedule 10S and 5S pipe as defined in ANSI/ASME B36.19M also it covers short pattern stub ends suitable for use with Schedule 40S pipe.
- MSS SP-43 tolerances are the same as for ASME/ANSI B16.9 and B16.28 except with regard to the outside diameter at the bevel:
- Tolerance of OD at Bevel =
- ± 0.03 in for NPS ½ to 4
- +0.06, -0.03 in for NPS 5 to 8
- +0.09, -0.03 in for NPS 10 to 18
- +0.12, to -0.03 in for NPS 20 to 24
ASTM A403 Grade WP316H Buttweld Fittings Dimensions
Dimensions and weights of ASME B16.9 Stainless Steel 316H Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)
| Pipe Elbow Nominal Size | Pipe Elbow Outside Diameter Y |
Wall Thickness T (Pipe Elbow Schedule) |
45 Deg. Elbow LR Centre to Face B | 45 Deg. Elbow LR Weight |
90 Deg. Elbow LR Centre to Face A | 90 Deg. Elbow LR Weight | 90 Deg. Elbow SR Centre to Face A | 90 Deg. Elbow SR Weight | ||
| mm | in | mm | mm | Schedule | mm | kg | mm | kg | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
| 3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
| 20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
| 3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
| 25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
| 4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
| 4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
| 5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
| 5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
| 7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
| 7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
| 8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
| 9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
| 10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
| 12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
| 250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
| 12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
| 12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
| 12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
| 12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
| 12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
| 12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
| 600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
| 12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 | |||
Dimensions and weights of ASME B16.9 Stainless Steel 316H Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)
| Buttweld Tee and Cap Nominal Size |
Pipe Tee and Cap Outside Diameter Y |
Pipe Tee and Cap Wall Thickness T |
Buttweld Tee Dimensions (C and M) |
Buttweld Tee Weight |
Buttweld Cap End to End |
Buttweld Cap Weight |
||
| mm | in | mm | mm | Schedule | mm | mm | mm | kg |
| 15 | 1/2” | 21.3 | 2.78 | STD | 25.4 | 0.58 | ||
| 3.73 | X.S | 25.4 | 0.21 | |||||
| 20 | 3/4” | 26.7 | 2.87 | STD | 28.6 | 0.21 | ||
| 3.91 | X.S | 28.6 | 0.27 | |||||
| 25 | 1” | 33.4 | 3.38 | STD | 38.1 | 0.34 | 38.1 | 0.1 |
| 4.55 | X.S | 38.1 | 0.43 | 38.1 | 0.14 | |||
| 32 | 11/4” | 42.2 | 3.56 | STD | 47.6 | 0.64 | 38.1 | 0.14 |
| 4.85 | X.S | 47.6 | 0.75 | 38.1 | 0.18 | |||
| 40 | 11/2” | 48.3 | 3.68 | STD | 57.1 | 0.95 | 38.1 | 0.18 |
| 5.08 | X.S | 57.1 | 1.13 | 38.1 | 0.23 | |||
| 50 | 2” | 60.3 | 3.91 | STD | 63.5 | 1.45 | 38.1 | 0.27 |
| 5.54 | X.S | 63.5 | 1.72 | 38.1 | 0.32 | |||
| 65 | 21/2” | 73.0 | 5.16 | STD | 76.2 | 2.45 | 38.1 | 0.41 |
| 7.01 | X.S | 76.2 | 2.95 | 38.1 | 0.45 | |||
| 80 | 3” | 88.9 | 5.49 | STD | 85.7 | 3.45 | 50.8 | 0.64 |
| 7.62 | X.S | 85.7 | 4.3 | 50.8 | 0.82 | |||
| 100 | 4” | 114.3 | 6.02 | STD | 105.0 | 5.7 | 63.5 | 1.13 |
| 8.56 | X.S | 105.0 | 7.3 | 63.5 | 1.54 | |||
| 125 | 5” | 141.3 | 6.65 | STD | 124.0 | 9.1 | 76.2 | 1.91 |
| 9.5 | X.S | 124.0 | 11.8 | 76.2 | 2.59 | |||
| 150 | 6” | 168.3 | 7.11 | STD | 143.0 | 13.6 | 88.9 | 2.95 |
| 10.97 | X.S | 143.0 | 19.0 | 88.9 | 4.1 | |||
| 200 | 8” | 219.1 | 8.18 | STD | 178.0 | 25.0 | 101.6 | 5.0 |
| 12.7 | X.S | 178.0 | 33.5 | 101.6 | 7.3 | |||
| 250 | 10” | 273.0 | 9.27 | STD | 216.0 | 41.0 | 127.0 | 9.1 |
| 12.7 | X.S | 216.0 | 54.0 | 127.0 | 12.0 | |||
| 300 | 12” | 323.9 | 9.52 | STD | 254.0 | 57.0 | 152.4 | 13.6 |
| 12.7 | X.S | 254.0 | 77.0 | 152.4 | 17.0 | |||
| 350 | 14” | 355.6 | 9.52 | STD | 279.0 | 73.0 | 165.1 | 15.9 |
| 12.7 | X.S | 279.0 | 93.0 | 165.1 | 21.0 | |||
| 400 | 16” | 406.4 | 9.52 | STD | 305.0 | 91.0 | 178.8 | 20.0 |
| 12.7 | X.S | 305.0 | 120.0 | 178.8 | 26.0 | |||
| 450 | 18” | 457.0 | 9.52 | STD | 343.0 | 127.0 | 203.2 | 26.0 |
| 12.7 | X.S | 343.0 | 165.0 | 203.2 | 34.0 | |||
| 500 | 20” | 508.0 | 9.52 | STD | 381.0 | 227.0 | 228.6 | 33.0 |
| 12.7 | X.S | 381.0 | 270.0 | 228.6 | 43.0 | |||
| 600 | 24” | 610.0 | 9.52 | STD | 432.0 | 345.0 | 266.7 | 46.0 |
| 12.7 | X.S | 432.0 | 430.0 | 266.7 | 61.0 | |||
Dimensions and Weights of ASME B16.9 Stainless Steel 316H Buttweld Concentric Reduce rs and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)
| Buttweld Reducer Nominal Size |
Pipe Reducer Length H | Pipe Reducer Schedule T | Pipe Reducer Weight |
|
| mm | in | mm | Kg | |
| 20×15 | 3/4” x 1/2” | 38.1 | STD | 0.07 |
| XS | 0.1 | |||
| 25×15 | 1” x 1/2” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 25×20 | 1” x 3/4” | 50.8 | STD | 0.14 |
| X.S | 0.18 | |||
| 32×15 | 11/4” x 1/2” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×20 | 11/4” x 3/4“ | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 32×25 | 11/4” x 1” | 50.8 | STD | 0.18 |
| X.S | 0.23 | |||
| 40×15 | 11/2” x 1/2” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×20 | 11/2” x 3/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×25 | 11/2” x 1” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 40×32 | 11/2” x 11/4” | 63.5 | STD | 0.27 |
| X.S | 0.32 | |||
| 50×15 | 2” x 1/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×20 | 2” x 3/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×25 | 2”x1” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×32 | 2” x 11/4” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 50×40 | 2” x 11/2” | 76.2 | STD | 0.41 |
| X.S | 0.54 | |||
| 65×25 | 21/2” x 1” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×32 | 21/2” x 11/4” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×40 | 21/2” x 11/2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 65×50 | 21/2” x 2” | 88.9 | STD | 0.68 |
| X.S | 0.91 | |||
| 80×40 | 3” x 11/2” | 88.9 | STD | 0.77 |
| X.S | 1.09 | |||
| 80×50 | 3”x2” | 88.9 | STD | 0.91 |
| X.S | 1.22 | |||
| 80×65 | 3” x 21/2” | 88.9 | STD | 0.91 |
| X.S | 1.27 | |||
| 100×40 | 4” x 11/2” | 101.6 | STD | 1.36 |
| X.S | 1.91 | |||
| 100×50 | 4”x2” | 101.6 | STD | 1.40 |
| X.S | 1.95 | |||
| 100×65 | 4” x 21/2” | 101.6 | STD | 1.45 |
| X.S | 2.04 | |||
| 100×80 | 4”x3” | 101.6 | STD | 1.59 |
| X.S | 2.08 | |||
| 125×80 | 5”x3” | 127.0 | STD | 2.5 |
| X.S | 3.4 | |||
| 125 x 100 | 5”x4” | 127.0 | STD | 2.7 |
| X.S | 3.8 | |||
| 150×50 | 6”x2” | 140.0 | STD | 3.4 |
| X.S | 4.3 | |||
| 150×65 | 6” x 21/2” | 140.0 | STD | 3.4 |
| X.S | 4.5 | |||
| 150×80 | 6”x3” | 140.0 | STD | 3.6 |
| X.S | 4.8 | |||
| 150 x 100 | 6”x4” | 140.0 | STD | 3.7 |
| X.S | 5.2 | |||
| 150 x 125 | 6”x5” | 140.0 | STD | 3.9 |
| X.S | 5.4 | |||
| 200×80 | 8”x3” | 152.4 | STD | 4.5 |
| X.S | 7.2 | |||
| 200 x 100 | 8”x4” | 152.4 | STD | 5.0 |
| X.S | 7.7 | |||
| 200 x 125 | 8”x5” | 152.4 | STD | 5.4 |
| X.S | 8.2 | |||
| 200 x 150 | 8”x6” | 152.4 | STD | 5.9 |
| X.S | 8.6 | |||
| 250 x 100 | 10”x4” | 178.0 | STD | 9.1 |
| X.S | 11.8 | |||
| 250 x 125 | 10”x5” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 150 | 10”x6” | 178.0 | STD | 9.5 |
| X.S | 13.6 | |||
| 250 x 200 | 10”x8” | 178.0 | STD | 10.0 |
| X.S | 14.0 | |||
| 300 x 150 | 12”x6” | 203.0 | STD | 14.1 |
| X.S | 18.1 | |||
| 300 x 200 | 12”x8” | 203.0 | STD | 14.5 |
| X.S | 19.1 | |||
| 300 x 250 | 12” x 10” | 203.0 | STD | 15.4 |
| X.S | 20.0 | |||
| 350 x 200 | 14”x8” | 330.0 | STD | 26.3 |
| X.S | 34.9 | |||
| 350 x 250 | 14” x 10” | 330.0 | STD | 27.2 |
| X.S | 36.3 | |||
| 350 x 300 | 14” x 12” | 330.0 | STD | 28.6 |
| X.S | 37.6 | |||
| 400 x 200 | 16”x8” | 356.0 | STD | 31.8 |
| X.S | 42.6 | |||
| 400 x 250 | 16” x 10” | 356.0 | STD | 33.1 |
| X.S | 43.5 | |||
| 400 x 300 | 16” x 12” | 356.0 | STD | 34.5 |
| X.S | 45.4 | |||
| 400 x 350 | 16” x 14” | 356.0 | STD | 35.4 |
| X.S | 46.3 | |||
| 450 x 250 | 18” x 10” | 381.0 | STD | 38.0 |
| X.S | 52.1 | |||
| 450 x 300 | 18” x 12” | 381.0 | STD | 39.0 |
| X.S | 53.5 | |||
| 450 x 350 | 18” x 14” | 381.0 | STD | 40.0 |
| X.S | 54.9 | |||
| 450 x 400 | 18” x 16” | 381.0 | STD | 40.8 |
| X.S | 53.5 | |||
| 500 x 250 | 20” x 10” | 508.0 | STD | 53.0 |
| X.S | 79.9 | |||
| 500 x 300 | 20” x 12” | 508.0 | STD | 54.4 |
| X.S | 82.0 | |||
| 500 x 350 | 20” x 14” | 508.0 | STD | 57.6 |
| X.S | 80.2 | |||
| 500 x 400 | 20” x 16” | 508.0 | STD | 58.9 |
| X.S | 82.0 | |||
| 500 x 450 | 20” x 18” | 508.0 | STD | 61.7 |
| X.S | 82.0 | |||
| 600 x 300 | 24” x 12” | 508.0 | STD | 63.5 |
| X.S | 84.4 | |||
| 600 x 350 | 24” x 14” | 508.0 | STD | 65.3 |
| X.S | 86.8 | |||
| 600 x 400 | 24” x 16” | 508.0 | STD | 68.0 |
| X.S | 90.4 | |||
| 600 x 450 | 24” x 18” | 508.0 | STD | 72.6 |
| X.S | 96.5 | |||
| 600 x 500 | 24” x 20” | 508.0 | STD | 77.1 |
| X.S | 102.5 | |||
Stainless Steel 316H Buttweld Fittings Types
90 Degree Elbow
Stainless Steel 316H 90 Degree Elbow
Price: $600.00-$1,000.00 / Ton
45 Degree Elbow
Stainless Steel 316H 45 Degree Elbow
Price: $10-$60 / Kilogram
180 Degree Elbow
Stainless Steel 316H 180 Degree Elbow
Price: $1-$40.00 / Piece
1D / 1.5D Elbow
Stainless Steel 316H 1D/1.5D Elbow / Bends
Price: $20-$40.00 / Piece
3D / 5D Elbow
Stainless Steel 316H 3D/5D Elbow / Bends
Price: $600.00-$1,000.00 / Ton
Equal Tee
Stainless Steel 316H Equal Tee
Price: $500.00-$1200.00 / Ton
Unequal Tee / Reducing Tee
Stainless Steel 316H Unequal or Reducing Tee
Price: $10-$60.00 / Kilogram
Lateral Tee
Stainless Steel 316H Lateral Tee
Price: $400.00-$900.00 / Ton
Long Radius Pipe Bend
Stainless Steel 316H Long Radius Pipe Bend
Price: $10-$100.00 / Kilogram
Split Tee
Stainless Steel 316H Split Tee
Price: $200.00-$1200.00 / Ton
Concentric Reducer
Stainless Steel 316H Concentric Reducer
Price: $500.00-$1,000.00 / Ton
Eccentric Reducer
Stainless Steel 316H Eccentric Reducer
Price: $400.00-$1300.00 / Ton
Equal Cross
Stainless Steel 316H Equal Cross
Price: $10-$40.00 / Piece
Unequal Cross
Stainless Steel 316H Unequal Cross
Price: $600.00-$1,000.00 / Ton
Lap Joint Stub End
Stainless Steel 316H Lap Joint Stub End
Price: $700.00-$1400.00 / Ton
End Cap/ Pipe Cap
Stainless Steel 316H Pipe End Caps
Price: $30-$80.00 / Kilogram
Piggable Bend
Stainless Steel 316H Piggable Bend
Price: $600.00-$1,000.00 / Ton
Hot Induction Pipe Bend
Stainless Steel 316H Hot Induction Pipe Bend
Price: $10-$40.00 / Piece
J PipeBend
Stainless Steel 316H J Pipe Bend
Price: $20-$90.00 / Kilogram
Mitered Pipe Bend
Stainless Steel 316H Mitered Pipe Bend
Price: $600.00-$1,000.00 / Ton
U Pipe Bend
Stainless Steel 316H U Pipe Bend
Price: $10-$40.00 / Piece
3D Pipe Bend
Stainless Steel 316H 3D Pipe Bend
Price: $30-$80.00 / Kilogram
5D Pipe Bend
Stainless Steel 316H 5D Pipe Bend
Price: $600.00-$1,000.00 / Ton
8D Pipe Bend
Stainless Steel 316H 8D Pipe Bend
Price: $10-$40.00 / Piece
10D Pipe Bend
Stainless Steel 316H 10D Pipe Bend
Price: $30-$80.00 / Kilogram
IBR Approved Buttweld Fittings
Stainless Steel 316H IBR Approved Fittings
Price: $600.00-$1,000.00 / Ton
Hub and Clamp Connector Fittings
Stainless Steel 316H Hub and Clamp Connector Fittings
Price: $300-$800 / Ton
Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.
ASTM A403 SS 316H Buttweld Pipe Fittings – Applications & Industries
Oil & Gas Industries
Gas Processing Industries
Food Processing Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Sugar Industries
Fertilizers Industries
We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Stainless Steel 316H Buttweld Pipe Fittings. We supply ANSI B16.9 SS 316H Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.
Ready Stock of 316H Stainless Steel Pipe Fittings Export to
Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City
AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu
Please send us the complete details of Stainless Steel 316H Buttweld Pipe Fittings requirement. We offer SS 316H Pipe Fittings, and ASTM A403 WP316H Buttweld Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have a team of highly skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these SS 316H Buttweld Elbow, Tee, ASTM A403 WP316H Reducer, Bend, Cross, ASTM A403 WP316H End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end.
sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us