Titanium Grade 2 Pipe Fittings Supplier

ASTM B363 Grade 2 Pipe Fitings, Titanium Gr. 2 Buttweld Fittings, Titanium Gr-2 Elbow, Titanium UNS R50400 Pipe Fittings Manufacturer in India

Higher corrosion resistance is required and the lower work hardening rate of this steel can be compensated. This Grade 2 Titanium Elbow Pipe Fittings requires post-annealing to regain maximum corrosion resistant properties. The main difference is the high carbon content of this steel, which makes the welding heat-affected zones susceptible to accelerated corrosion in certain environments. Ti-Alloy Gr 2 45-Degree Elbow Pipe Fittings can be exposed to a temperature of 1600 degrees Fahrenheit, and it is at that temperature that it is needed. The maximum exposure temperature for this TI40A 90-Degree Elbow Pipe Fittings is approximately 1450 degrees F (788 degrees C) in company of an intermittent exposure.

We as a Metalfed Engineering is a well-known exporter and seller of Titanium Alloy Grade 2 Long Radius Elbow Pipe Fittings, which can be shaped and stretched. The lower work hardening rate of this steel is acceptable and gives better ductility needed for forming. Titanium UNS R50400 Short Radius Elbow Pipe Fittings is used in kitchen utensils, tableware, electrical components and many others. Heat this steel to 260 Degree C – 482 Degree C (400 Degree F – 900 Degree F) and then air cool. Temperatures above this range for Titanium WNR 3.7035 Reducer Pipe Fittings steel will cause scaling and a reduction in machinability of the material. We use an in-house grinding/polishing line or one of five cutting plotters to produce High Quality of this ASTM B363 Grade 2 Pipe Fittings for applications that require a critical surface or precision grooved edges.

Exporter of ASTM B363 Titanium Alloy Gr 2 Weldable Pipe Fittings, ANSI B16.9 Titanium Alloy Gr 2 Equal Tee Fittings, WERKSTOFF NR. 3.7035 Seamless Pipe Fitting, Titanium Gr.2 Pipe Cap, ASME SB363 Titanium Gr-2 Stub End.

Table of Content

Titanium Grade 2 Pipe Fittings Specifications
Titanium Grade 2 Fittings Equivalent Grades
Titanium Gr. 2 Pipe Fittings Chemical Composition
Titanium Grade 2 Pipe Fittings Mechanical Properties
Titanium Grade 2 Pipe Fittings Size Range
Titanium Grade 2 Pipe Fittings Manufacturing Standards

Titanium Grade 2 Pipe Fittings Dimensional Tolerances
Titanium Grade 2 Pipe Fittings Dimensions
ASTM B363 Grade 2 Pipe Fittings Applications
Titanium Gr-2 Pipe Fittings Exports to
Titanium R50400 Pipe Fittings Types and Prices

We are known for efficient working and service that we provide with the supply of Titanium R50400 Pipe Fittings. We ensure superior quality of our Titanium Gr-2 Buttweld Pipe Fittings manufactured with trained staff and advanced machinery with high-tech technology.

Value Added Services

Epoxy Coating
Electro Polish
Sand Blasting

Testing

Intergranular Corrosion Test
Tensile Test
Hardness Test

Features

Good load bearing capacity
Excellent versatility and weldability
High tensile strength

Stockist of ASTM B363 Grade 2 Two Joint Pipe Fittings, Titanium R50400 Cross Fittings, ANSI B16.9 Titanium Grade 2 Butt weld Fittings, ASTM B363 Grade 2 Reducer, Ti. Alloy Grade 2 Pipe Bend at best price in India.

Titanium Grade 2 Pipe Fittings Specifications

Product Name:	Titanium Grade 2 Pipe Fittings
Specifications:	ASTM B363 / ASME SB363
size:	Welded Butt Weld Fittings:1/2" – 48" Seamless Butt Weld Fittings: 1/2" – 10" in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Dimensions:	ASME/ANSI B16.9, MSS-SP-43, ASME B16.28, BS1560, BS4504, BS4504, BS10
Types:	Seamless / Welded / Fabricated
Thickness:	SCH 10, SCH 20, SCH 30, SCH 40, SCH 60, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XS, XXS available with NACE MR 01-75
Bending Radius:	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom MSS Sp-43 Titanium Pipe Fitting
Elbows:	Angle: 22.5 deg, 30 deg, 45 deg, 90 deg, 180 deg, 1D, 1.5D, 2D, 2.5D, 3D, 4D, 5D, 6D, 7D, 8D, 10D-40D. Standard: ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-75 JISB2311 JISB2312 JISB2313, DIN2605 GB, BS, ISO
Manufacturing process:	Forge, Cast, Push, Press, etc.
Key markets and industries:	Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (largely seamless).
Test Certificates (TC):	Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Application:	Fittings To Connect Pipe & Tubes in Petroleum, Chemical, Power, Gas, Construction, Metallurgy, Shipbuilding. Schedule 10 fittings are an economical alternative for lower-pressure applications. Schedule 40 fittings have a thicker wall for higher-pressure applications.

Titanium Grade 2 Buttweld Fittings Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Titanium Gr. 2	3.7035	R50400

Titanium Grade 2 Pipe Fittings Chemical Composition

Grade	Ti	C	Fe	H	N	O	Al	V
Ti Grade2	99.2 min	0.1 max	0.3 max	0.015 max	0.03 max	0.25 max	–	–

Ti Grade 2 Pipe Fittings Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
4.5 g/cm3	1665 °C (3030 °F)	Psi – 39900 , MPa – 275	Psi – 49900 , MPa – 344	20 %

Titanium Grade 2 Pipe Fittings Size Range

Below Mentioned Titanium Grade 2 Pipe Fitting Size: 1/2″ – 48″
ASTM A815 Titanium Grade 2 Elbow – Long Radius	Titanium Grade 2 ASTM A815 Stub Ends
Titanium Grade 2 Elbow – Short Radius	ASTM A815 Titanium Grade 2 Cross
ASTM A815 Titanium Grade 2 Reducing Elbow	ASTM A815 Titanium Grade 2 Reducing Cross
ASTM A815 Titanium Grade 2 45° Elbow	ASTM A815 Titanium Grade 2 Tees
ASTM A815 Titanium Grade 2 Fabricated Tee	ASTM A815 Titanium Grade 2 End Cap
ASTM A815 Titanium Grade 2 Reducer	ASTM A815 Titanium Grade 2 Coupling
ASTM A815 Titanium Grade 2 Concentric Reducer	ASTM A815 Titanium Grade 2 Pipe Nipple
ASTM A815 Titanium Grade 2 Eccentric Reducer	ASTM A815 Titanium Grade 2 5D Elbow
ASTM A815 Titanium Grade 2 3D Elbow	ASTM A815 Titanium Grade 2 Welded Pipe Fittings

Titanium Grade 2 Buttweld Fittings Standards

American Steel Pipe Fittings Standard
Standard Code	Standard Name
Forged Durimet pipe fittings	ANSI ASME SB-466
Factory-Made wrought steel pipe fittings	ANSI ASME B16.9
Wrought steel butt-welding short radius elbows and returns	ANSI ASME B16.28
Titanium butt-welding fittings	ISO 5251
Titanium butt-welding fittings	MSS SP-43
Forging butt-welding fittings	MSS SP-75
Japanese Steel Pipe Fittings Standard
Universal steel butt-welding pipe fittings	JIS B2311
Steel butt-welding pipe fittings	JIS B2312
Steel plate butt-welding pipe fittings	JIS B2313
German Steel Pipe Fittings Standard
Steel butt-welding pipe fittings.elbows and bends	DIN 2605
Steel butt-welding pipe fittings.tees	DIN 2615
Steel butt-welding pipe fittings.reducers	DIN 2616
Steel butt-welding pipe fittings.caps	DIN 2617
Other Steel Pipe Fittings Standard
3 Butt-welding pipe fittings	EN 1025

Titanium Grade 2 Buttweld Pipe Fittings Dimensional Tolerances

Tolerance of Butt-welding Fittings ASME B16.9


All Fittings[Note(1) and (2)]				Center-to-End Diamensions		Overall Length of Reducers and Lap Joint Stub Ends,F,H	Overall Length of Caps, E	180-deg Returns
Nominal Pipe Size(NPS)	DN	Outside Diameter at Bevel,D[Note(3) and (4)]	Inside Diameter at End [Note(3) and (5)]	90-deg and 45-deg Long and Short Radius Elbows and Tees. A,B,C,M	3D Radius Elbows, A,B	Overall Length of Reducers and Lap Joint Stub Ends,F,H	Overall Length of Caps, E	Center-to-Center Dimension, O	Back-to-Face Demensoin, K	Alignment of Ends, U
1/2to2 1/2	15-65	+1.6-0.8	0.8	2	3	2	3	6	6	1
3to3 1/2	80-90	1.6	1.6	2	3	2	3	6	6	1
4	100	1.6	1.6	2	3	2	3	6	6	1
5to8	125-200	+2.4 -1.6	1.6	2	3	2	6	6	6	1
10to18	250-450	+4.0 -3.2	3.2	2	3	2	6	10	6	2
20to24	500-800	+6.4 -4.8	4.8	2	3	2	6	10	6	2
26to30	650-750	+6.4 -4.8	4.8	3	6	5	10	…	…	…
32to48	800-1200	+6.4 -4.8	4.8	5	6	5	10	…	…	…
All Fittings[Note(1) and (2)]				Center-to-End Diamensions			Nominal Pipe Size(NPS)	DN	Angularity Tolerance
Nominal Pipe Size(NPS)	DN	Outside Diameter at Bevel,D[Note(3) and (4)]	Inside Diameter at End [Note(3) and (5)]	Outside Diameter of Lap,G	Fillet Radius of Lap,R	Lap Thickness	Nominal Pipe Size(NPS)	DN	Off Angle,Q	Off Plane,P
1/2to2 1/2	15-65	+1.6-0.8	0.8	+0,-1	+0,-1	+1.6,-0	1/2to4	15-100	1	2
3to3 1/2	80-90	1.6	1.6	+0,-1	+0,-1	+1.6,-0	5to8	125-200	2	4
4	100	1.6	1.6	+0,-1	+0,-2	+1.6,-0	10to12	250-300	3	5
5to8	125-200	+2.4 -1.6	1.6	+0,-1	+0,-2	+1.6,-0	14to16	350-400	3	6
10to18	250-450	+4.0 -3.2	3.2	+0,-2	+0,-2	+3.2,-0	18to24	450-800	4	`10
20to24	500-800	+6.4 -4.8	4.8	+0,-2	+0,-2	+3.2,-0	26to30	650-750	5	10
26to30	650-750	+6.4 -4.8	4.8	…	…	…	32to42	800-1050	5	13
32to48	800-1200	+6.4 -4.8	4.8	…	…	…	44to48	1100-1200	5	19

GENERAL NOTES:
(a)All dimensions are in mm.
(b)Tolerances are equal plus and minus except as noted.

NOTES:
(1)The inside diameter and the nominal wall thicknesat ends are to be specified by the purchaser.
(2)A minimum wall thickness of 87.5% applies unless the purchaser specifies a different wall thickness toletance.
(3)Out-of-round is the sum of absolute values of plus and minus tolerances.

Titanium Gr. 2 Buttweld Fittings Dimensions

Dimensions and weights of ASME B16.9 Titanium Grade 2 Buttweld 45 Degree Elbow, 90 Degree Elbows Short and Long Radius (NPS 1/2 to 24, schedule STD/XS)

Pipe Elbow Nominal Size		Pipe Elbow Outside Diameter Y	Wall Thickness T (Pipe Elbow Schedule)		45 Deg. Elbow LR Centre to Face B	45 Deg. Elbow LR Weight	90 Deg. Elbow LR Centre to Face A	90 Deg. Elbow LR Weight	90 Deg. Elbow SR Centre to Face A	90 Deg. Elbow SR Weight
mm	in	mm	mm	Schedule	mm	kg	mm	kg	mm	kg
15	1/2”	21.3	2.78	STD	15.9	0.04	38.1	0.08	–	–
			3.73	X.S	15.9	0.05	38.1	0.10	–	–
20	3/4”	26.7	2.87	STD	11.1	0.04	28.6	0.08	–	–
			3.91	X.S	11.1	0.05	28.6	0.11	–	–
25	1”	33.4	3.38	STD	22.2	0.09	38.1	0.15	25.4	0.11
			4.55	X.S	22.2	0.11	38.1	0.19	25.4	0.14
32	11/4”	42.2	3.56	STD	25.4	0.14	47.6	0.28	31.75	0.18
			4.85	X.S	25.4	0.2	47.6	0.39	31.75	0.24
40	11/2”	48.3	3.68	STD	28.6	0.2	57.1	0.4	38.1	0.26
			5.08	X.S	28.6	0.25	57.1	0.5	38.1	0.35
50	2”	60.3	3.91	STD	34.9	0.36	76.2	0.72	50.8	0.5
			5.54	X.S	34.9	0.5	76.2	1.0	50.8	0.68
65	21/2”	73.0	5.16	STD	44.4	0.73	95.2	1.46	63.5	0.95
			7.01	X.S	44.4	0.91	95.2	1.82	63.5	1.27
80	3”	88.9	5.49	STD	50.8	1.1	114.3	2.18	76.2	1.45
			7.62	X.S	50.8	1.45	114.3	2.86	76.2	1.95
100	4”	114.3	6.02	STD	63.5	2.1	152.4	4.2	101.6	2.8
			8.56	X.S	63.5	2.9	152.4	5.7	101.6	3.9
125	5”	141.3	6.65	STD	79.4	3.4	190.0	6.8	127.0	4.8
			9.5	X.S	79.4	5.0	190.0	10.0	127.0	6.5
150	6”	168.3	7.11	STD	95.2	5.1	229.0	10.1	152.4	6.8
			10.97	X.S	95.2	7.7	229.0	15.3	152.4	10.2
200	8”	219.1	8.18	STD	127.0	10.2	305.0	20.4	203.0	13.6
			12.7	X.S	127.0	15.5	305.0	30.9	203.0	20.9
250	10”	273.9	9.27	STD	159.0	18.1	381.0	36.1	254.0	24.1
			12.7	X.S	159.0	24.4	381.0	48.8	254.0	32.5
300	12”	323.9	9.52	STD	190.0	26.6	457.0	53.1	305.0	35.4
			12.7	X.S	190.0	35.0	457.0	70.0	305.0	46.7
350	14”	355.6	9.52	STD	222.0	34.1	533.0	68.1	356.0	45.4
			12.7	X.S	222.0	45.0	533.0	90.0	356.0	60.0
400	16”	406.4	9.52	STD	254.0	45.0	610.0	89.3	406.0	59.5
			12.7	X.S	254.0	59.0	610.0	118.0	406.0	78.7
450	18”	457.0	9.52	STD	286.0	56.5	686.0	113.0	457.0	75.6
			12.7	X.S	286.0	75.0	686.0	150.0	457.0	100.0
500	20”	508.0	9.52	STD	318.0	85.0	762.0	140.0	508.0	93.5
			12.7	X.S	318.0	112.5	762.0	186.0	508.0	124.0
800	24”	610.00	9.52	STD	381.0	101.5	914.0	203.0	610.0	135.0
			12.7	X.S	381.0	134.5	914.0	269.0	610.0	179.0

Dimensions and weights of ASME B16.9 Titanium Grade 2 Buttweld Tee and Cap (NPS 1/2 to 24, schedule STD/XS)

Buttweld Tee and Cap Nominal Size		Pipe Tee and Cap Outside Diameter Y	Pipe Tee and Cap Wall Thickness T		Buttweld Tee Dimensions (C and M)	Buttweld Tee Weight	Buttweld Cap End to End	Buttweld Cap Weight
mm	in	mm	mm	Schedule	mm	mm	mm	kg
15	1/2”	21.3	2.78	STD	25.4	0.58
			3.73	X.S	25.4	0.21
20	3/4”	26.7	2.87	STD	28.6	0.21
			3.91	X.S	28.6	0.27
25	1”	33.4	3.38	STD	38.1	0.34	38.1	0.1
			4.55	X.S	38.1	0.43	38.1	0.14
32	11/4”	42.2	3.56	STD	47.6	0.64	38.1	0.14
			4.85	X.S	47.6	0.75	38.1	0.18
40	11/2”	48.3	3.68	STD	57.1	0.95	38.1	0.18
			5.08	X.S	57.1	1.13	38.1	0.23
50	2”	60.3	3.91	STD	63.5	1.45	38.1	0.27
			5.54	X.S	63.5	1.72	38.1	0.32
65	21/2”	73.0	5.16	STD	76.2	2.45	38.1	0.41
			7.01	X.S	76.2	2.95	38.1	0.45
80	3”	88.9	5.49	STD	85.7	3.45	50.8	0.64
			7.62	X.S	85.7	4.3	50.8	0.82
100	4”	114.3	6.02	STD	105.0	5.7	63.5	1.13
			8.56	X.S	105.0	7.3	63.5	1.54
125	5”	141.3	6.65	STD	124.0	9.1	76.2	1.91
			9.5	X.S	124.0	11.8	76.2	2.59
150	6”	168.3	7.11	STD	143.0	13.6	88.9	2.95
			10.97	X.S	143.0	19.0	88.9	4.1
200	8”	219.1	8.18	STD	178.0	25.0	101.6	5.0
			12.7	X.S	178.0	33.5	101.6	7.3
250	10”	273.0	9.27	STD	216.0	41.0	127.0	9.1
			12.7	X.S	216.0	54.0	127.0	12.0
300	12”	323.9	9.52	STD	254.0	57.0	152.4	13.6
			12.7	X.S	254.0	77.0	152.4	17.0
350	14”	355.6	9.52	STD	279.0	73.0	165.1	15.9
			12.7	X.S	279.0	93.0	165.1	21.0
400	16”	406.4	9.52	STD	305.0	91.0	178.8	20.0
			12.7	X.S	305.0	120.0	178.8	26.0
450	18”	457.0	9.52	STD	343.0	127.0	203.2	26.0
			12.7	X.S	343.0	165.0	203.2	34.0
500	20”	508.0	9.52	STD	381.0	227.0	228.6	33.0
			12.7	X.S	381.0	270.0	228.6	43.0
800	24”	610.0	9.52	STD	432.0	345.0	266.7	46.0
			12.7	X.S	432.0	430.0	266.7	61.0

Dimensions and Weights of ASME B16.9 Titanium Grade 2 Buttweld Concentric Reducers and Eccentric Reducers(NPS 1/2 to 24, schedule STD/XS)

Buttweld Reducer Nominal Size		Pipe Reducer Length H	Pipe Reducer Schedule T	Pipe Reducer Weight
mm	in	mm		Kg
20×15	3/4” x 1/2”	38.1	STD	0.07
			XS	0.1
25×15	1” x 1/2”	50.8	STD	0.14
			X.S	0.18
25×20	1” x 3/4”	50.8	STD	0.14
			X.S	0.18
32×15	11/4” x 1/2”	50.8	STD	0.18
			X.S	0.23
32×20	11/4” x 3/4“	50.8	STD	0.18
			X.S	0.23
32×25	11/4” x 1”	50.8	STD	0.18
			X.S	0.23
40×15	11/2” x 1/2”	63.5	STD	0.27
			X.S	0.32
40×20	11/2” x 3/4”	63.5	STD	0.27
			X.S	0.32
40×25	11/2” x 1”	63.5	STD	0.27
			X.S	0.32
40×32	11/2” x 11/4”	63.5	STD	0.27
			X.S	0.32
50×15	2” x 1/2”	76.2	STD	0.41
			X.S	0.54
50×20	2” x 3/4”	76.2	STD	0.41
			X.S	0.54
50×25	2”x1”	76.2	STD	0.41
			X.S	0.54
50×32	2” x 11/4”	76.2	STD	0.41
			X.S	0.54
50×40	2” x 11/2”	76.2	STD	0.41
			X.S	0.54
65×25	21/2” x 1”	88.9	STD	0.68
			X.S	0.91
65×32	21/2” x 11/4”	88.9	STD	0.68
			X.S	0.91
65×40	21/2” x 11/2”	88.9	STD	0.68
			X.S	0.91
65×50	21/2” x 2”	88.9	STD	0.68
			X.S	0.91
80×40	3” x 11/2”	88.9	STD	0.77
			X.S	1.09
80×50	3”x2”	88.9	STD	0.91
			X.S	1.22
80×65	3” x 21/2”	88.9	STD	0.91
			X.S	1.27
100×40	4” x 11/2”	101.6	STD	1.36
			X.S	1.91
100×50	4”x2”	101.6	STD	1.40
			X.S	1.95
100×65	4” x 21/2”	101.6	STD	1.45
			X.S	2.04
100×80	4”x3”	101.6	STD	1.59
			X.S	2.08
125×80	5”x3”	127.0	STD	2.5
			X.S	3.4
125 x 100	5”x4”	127.0	STD	2.7
			X.S	3.8
150×50	6”x2”	140.0	STD	3.4
			X.S	4.3
150×65	6” x 21/2”	140.0	STD	3.4
			X.S	4.5
150×80	6”x3”	140.0	STD	3.6
			X.S	4.8
150 x 100	6”x4”	140.0	STD	3.7
			X.S	5.2
150 x 125	6”x5”	140.0	STD	3.9
			X.S	5.4
200×80	8”x3”	152.4	STD	4.5
			X.S	7.2
200 x 100	8”x4”	152.4	STD	5.0
			X.S	7.7
200 x 125	8”x5”	152.4	STD	5.4
			X.S	8.2
200 x 150	8”x6”	152.4	STD	5.9
			X.S	8.6
250 x 100	10”x4”	178.0	STD	9.1
			X.S	11.8
250 x 125	10”x5”	178.0	STD	9.5
			X.S	13.6
250 x 150	10”x6”	178.0	STD	9.5
			X.S	13.6
250 x 200	10”x8”	178.0	STD	10.0
			X.S	14.0
300 x 150	12”x6”	203.0	STD	14.1
			X.S	18.1
300 x 200	12”x8”	203.0	STD	14.5
			X.S	19.1
300 x 250	12” x 10”	203.0	STD	15.4
			X.S	20.0
350 x 200	14”x8”	330.0	STD	26.3
			X.S	34.9
350 x 250	14” x 10”	330.0	STD	27.2
			X.S	36.3
350 x 300	14” x 12”	330.0	STD	28.6
			X.S	37.6
400 x 200	16”x8”	356.0	STD	31.8
			X.S	42.6
400 x 250	16” x 10”	356.0	STD	33.1
			X.S	43.5
400 x 300	16” x 12”	356.0	STD	34.5
			X.S	45.4
400 x 350	16” x 14”	356.0	STD	35.4
			X.S	46.3
450 x 250	18” x 10”	381.0	STD	38.0
			X.S	52.1
450 x 300	18” x 12”	381.0	STD	39.0
			X.S	53.5
450 x 350	18” x 14”	381.0	STD	40.0
			X.S	54.9
450 x 400	18” x 16”	381.0	STD	40.8
			X.S	53.5
500 x 250	20” x 10”	508.0	STD	53.0
			X.S	79.9
500 x 300	20” x 12”	508.0	STD	54.4
			X.S	82.0
500 x 350	20” x 14”	508.0	STD	57.6
			X.S	80.2
500 x 400	20” x 16”	508.0	STD	58.9
			X.S	82.0
500 x 450	20” x 18”	508.0	STD	61.7
			X.S	82.0
800 x 300	24” x 12”	508.0	STD	63.5
			X.S	84.4
800 x 350	24” x 14”	508.0	STD	65.3
			X.S	86.8
800 x 400	24” x 16”	508.0	STD	68.0
			X.S	90.4
800 x 450	24” x 18”	508.0	STD	72.6
			X.S	96.5
800 x 500	24” x 20”	508.0	STD	77.1
			X.S	102.5

Titanium Grade 2 Buttweld Fittings Types

Note: Prices are based on product, material grade and quantity. Contact us anytime to get full quotation.

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

ASTM A815 Titanium Grade 2 Buttweld Pipe Fittings – Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Titanium Grade 2 Buttweld Pipe Fittings. We supply ANSI B16.9 Titanium Grade 2 Pipe Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Titanium Grade 2 Pipe Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Titanium Grade 2 Pipe Fittings requirement. We offer ASTM B363 Grade 2 Pipe Fittings which are accurately designed to provide satisfaction to our customers. We have huge ready stock of Titanium Grade 2 Elbow, Super Titanium S32750 Tee, Reducer, Bend, Cross, End Caps, Stub Ends, Coller, Pipe Nipple at our valuable customers end. Buy ASTM A815 Titanium Grade 2 Pipe Fittingat a lowest price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us