Lap Joint Flange Suppliers

ASME / ANSI B16.5 Lap Joint Flange, ASME B16.47 Raised Lap Joint, Lapped Flange, Loose Flange Dimensions

We as Metalfed Engineering are a prominent manufacturer and seller of Lap Joint Flanges, which is an extremely tough and ductile alloy that has excellent corrosion resistance. More nickel in these Lapped Flange increases ductility and makes the finished product stronger, especially in acidic environments. Stainless Steel Lap Joint Flanges are covered by a variety of constructions or the use of equipment from these alloys for specific conditions. ASME B16.5 Loose Flange has excellent properties such as hardness, durability, corrosion resistance, and so on. Raised Lapped Joint flange is a strong, ductile alloy that has comparable corrosion resistance, is non-magnetic, and does not harden with heat treatment. Carbon Steel Lapped Flanges austenitic, non-magnetic, extremely tough and ductile, and is one of the most common and heat-resistant chromium-nickel steels.
EN 1092-1 Lap Joint Blind Flange offers high strength and lightweight, easy cleaning, a wide range of product shapes, and protection against contamination. A higher percentage of chromium, one of the main components of these Alloy Steel Lap Joint Flanges, improves the corrosion resistance of the end product. Such flanges should be forged after heated up to 2100 degrees F / 2300 degrees F and not forged below 1700 degrees F.

Well-known Manufacturer of Lapped Joint Flange, Lap Joint Backing Flange, Table E Lap Joint Flange, EN 1092-1 Lap Joint Blind Flange, JIS 10k Lap Joint Flange, Loose Flange PN16, DIN 2642 Lap Joint Loose Flange in all Dimensions.

Table of Content

ASME B16.5 Lap Joint Flange Specifications
Loose Flange ASME B16.5 Materials and Grades
Lapped Flange ASME B16.5 Types
ANSI B16.5 Lap Joint Flange Applications
ASME B16.5 Lap Joint Flange Export to

ASME B16.5 Class 150 Lap Joint Flange Dimensions
ASME B16.5 Class 300 Lap Joint Flange Dimensions
ASME B16.5 Class 600 Lap Joint Flange Dimensions
ASME B16.5 Class 900 Lap Joint Flange Dimensions
ASME B16.5 Class 1500 Lap Joint Flange Dimensions
ASME B16.5 Class 2500 Lap Joint Flange Dimensions

ANSI B16.5 Lapped Flange has a wide range of general uses, such as in food and beverage, sanitary, cryogenic and pressure-retaining applications. The hardness of these Super Duplex Steel Lapped Flanges varies similarly, from relatively soft annealed austenitic steel to extremely hard martensitic material such as that used for razor blades or ball bearings.

Huge Stockholder & Exporter of ANSI B16.5 Class 150#, 300#, 600#, 900#, 1500#, 2500# Lap Joint Flanges, Large Diameter Lap Joint Flange, Lap Joint Weld Neck Flange, Copper Nickel Lap Joint Ring Flange RTJ/FF/RF, Lap Joint Flange PN16 PN10 at Best Prices.

ASME B16.5 / ASME B16.47 Lap Joint Flange Specifications

Product Name:	Lap Joint Flange \| Loose Flange \| Lapped Flange
Size Chart:	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Dimensions:	ANSI / ASME B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Rating ANSI:	Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN:	PN6 PN10 PN16 PN25 PN40 PN64 / 6Bar 10Bar 16Bar 25Bar 40Bar
Coating/Surface Treatment:	Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type/Flange Face Type:	RF-Raised Face, RTJ-Ring Type Joint, FF-Flat Face, LMF-Large Male-Female, LJF-Lap-Joint Face, SMF-Small Male-Female, Small Tongue, Large Tongue & Groove, Groove
Custom Flange/Special Design:	As per your drawing
Standards:	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, GOST Flange, MSS SP44, ISO70051, BS1560-3.1, JISB2220, API7S-43, API7S-15, API605, EN1092
Flange Test:	Direct-reading Spectrograph, X-ray detector, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Flanges Equipment:	Press machine, Pushing Machine, Bending machine, electric bevelling machine, Sand-blasting machine, etc
Manufacturers of:	DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British Standard (BS) ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM A182 Lap Joint Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Test Certificates:	Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications:	Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders, Offshore, Piping Projects etc.
Export Network:	Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Lap Joint Flange Materials and Grades

Duplex Steel Lap Joint Flange:	ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Super Duplex Lap Joint Flange:	ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Stainless Steel Lap Joint Flange:	ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Nickel Alloys Lap Joint Flange:	ASTM SB564, SB160, SB472, SB162 – Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
Alloys Lap Joint Flange:	Alloy 20, Alloy C, Alloy C276, Alloy B2
Carbon Steel Lap Joint Flange:	STM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52
Copper Alloys Lap Joint Flange:	ASTM SB 61, SB62, SB151, SB152 – UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Low Temperature Steel Lap Joint Flange:	ASTM A350 LF2, LF3, LF6
High Yield Lap Joint Flange:	ASTM A694 F42, F52, F60, F65, F70
Alloy Steel Lap Joint Flange:	ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Titanium Lap Joint Flange:	Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Brass Lap Joint Flange:	2604 / 3602 / H59 / H62 / etc.
Aluminium Lap Joint Flange:	2017 / 5052 / 6063 / 6061 / 7075 etc.
Alloy 20 Lap Joint Flange:	ASME SB462 / ASTM B462, Carpenter® 20 Alloy, Alloy 20Cb-3
Nimonic Lap Joint Flange:	Nimonic 80A, Nimonic 75, Nimonic 90
254 SMO Lap Joint Flange:	ASME SA182 / ASTM A182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Other Lap Joint Flange Material:	Tin bronze, Alumunum bronze, Lead bronze

ASME B16.5 Lapped Flange Dimensions

Class 150 Lap Joint Flange Dimensions

							DRILLING
NOMINAL BORE	DIA. (D)	THICK. (E)	DIA. (B)	DIA. (A)	HEIGHT (H)	NBR	HOLES	DIA. (C)
1/2″	90	11.2	30	22.9	16	4	15.87	60.3
3/4″	100	12.7	38	28.2	16	4	15.87	69.9
1″	110	14.3	49	34.9	17	4	15.87	79.4
1 1/4″	115	15.9	59	43.7	21	4	15.87	88.9
1 1/2″	125	17.5	65	50.0	22	4	15.87	98.4
2″	150	20.7	78	62.5	25	4	19.05	120.7
2 1/2″	180	22.3	90	75.4	29	4	19.05	139.7
3″	190	23.9	108	91.4	30	4	19.05	152.4
3 1/2″	215	23.9	122	104.1	32	8	19.05	177.8
4″	230	23.9	135	116.8	33	8	19.05	190.5
5″	255	23.9	164	144.4	36	8	22.22	215.9
6″	280	25.4	192	171.4	40	8	22.22	241.3
8″	345	28.6	246	222.2	44	8	22.22	298.5
10″	405	30.2	305	277.4	49	12	25.40	362.0
12″	485	31.8	365	328.2	56	12	25.40	431.8
14″	535	35.0	400	360.2	79	12	28.57	476.3
16″	595	36.6	457	411.2	87	16	28.57	539.8
18″	635	39.7	505	462.3	97	16	31.75	577.9
20″	700	42.9	559	514.4	103	20	31.75	635.0
24″	815	47.7	663	616.0	111	20	34.92	749.3

Note: The dimensions are in millimeters

Class 300 Lap Joint Flange Dimensions

							DRILLING
NOMINAL BORE	DIA. (D)	THICK. (E)	DIA. (B)	DIA. (A)	HEIGHT (H)	NBR	HOLES	DIA. (C)
1/2″	95	14.3	38	22.9	22	4	15.87	66.7
3/4″	115	15.9	48	28.2	25	4	19.05	82.6
1″	125	17.5	54	34.9	27	4	19.05	88.9
1 1/4″	135	19.1	64	43.7	27	4	19.05	98.4
1 1/2″	155	20.7	70	50.0	30	4	22.22	114.3
2″	165	22.3	84	62.5	33	8	19.05	127.0
2 1/2″	190	25.4	100	75.4	38	8	22.22	149.2
3″	210	28.6	117	91.4	43	8	22.22	168.3
3 1/2″	230	30.2	133	104.1	44	8	22.22	184.2
4″	255	31.8	146	116.8	48	8	22.22	200.0
5″	280	35.0	178	144.4	51	8	22.22	235.0
6″	320	36.6	206	171.4	52	12	22.22	269.9
8″	380	41.3	260	222.2	62	12	25.40	330.2
10″	445	47.7	321	277.4	95	16	28.57	387.4
12″	520	50.8	375	328.2	102	16	31.75	450.8
14″	585	54.0	425	360.2	111	20	31.75	514.4
16″	650	57.2	483	411.2	121	20	34.29	571.5
18″	710	60.4	533	462.3	130	24	34.29	628.6
20″	775	63.5	587	514.4	140	24	34.29	685.8
24″	915	69.9	702	616.0	152	24	41.27	812.8

Note: The dimensions are in millimeters

Class 600 Lap Joint Flange Dimensions

							DRILLING
NOMINAL BORE	DIA. (D)	THICK. (E)	DIA. (B)	DIA. (A)	HEIGHT (H)	NBR	HOLES	DIA. (C)
1/2″	95	14.3	38	23.6	22	4	15.87	66.7
3/4″	115	15.9	48	29.0	25	4	19.05	82.6
1″	125	17.5	54	35.8	27	4	19.05	88.9
1 1/4″	135	20.7	64	44.4	29	4	19.05	98.4
1 1/2″	155	22.3	70	50.6	32	4	22.22	114.3
2″	165	25.4	84	63.5	37	8	19.05	127.0
2 1/2″	190	28.6	100	76.2	41	8	22.22	149.2
3″	210	31.8	117	92.2	46	8	22.22	168.3
3 1/2″	230	35.0	133	104.9	49	8	25.40	184.2
4″	275	38.1	152	117.6	54	8	25.40	215.9
5″	330	44.5	189	144.4	60	8	28.57	266.7
6″	355	47.7	222	171.4	67	12	28.57	292.1
8″	420	55.6	273	222.2	76	12	31.75	349.2
10″	510	63.5	343	276.2	111	16	34.92	431.8
12″	560	66.7	400	328.6	117	20	34.92	489.0
14″	605	69.9	432	360.4	127	20	38.10	527.0
16″	685	76.2	495	411.2	140	20	41.27	603.2
18″	745	82.6	546	462.0	152	20	44.45	6654.0
20″	815	88.9	610	512.8	165	24	44.45	723.9
24″	940	101.6	718	614.4	184	24	50.80	838.2

Note: The dimensions are in millimeters

Class 900 Lap Joint Flange Dimensions

Size in Inch	Size in mm	Outer Diameter	Flange Thick.	Lapped Thick.	Lapped ID	PCD	Lapped Thick.	Lapped Radius	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	G
1/2	15	120	38	32	22.9	82.6	22.3	3	4	3/4	110	7/8	M20	1.8
3/4	20	130	44	35	28.2	88.9	25.4	3	4	3/4	115	7/8	M20	2.3
1	25	150	52	41	34.9	101.6	28.6	3	4	7/8	125	1	M24	3.6
1 1/4	32	160	64	41	43.7	111.1	28.6	5	4	7/8	125	1	M24	4.1
1 1/2	40	180	70	44	50	123.8	31.8	6	4	1	140	1 1/8	M27	5.5
2	50	215	105	57	62.5	165.1	38.1	8	8	7/8	145	1	M24	11.5
2 1/2	65	245	124	64	75.4	190.5	41.3	8	8	1	160	1 1/8	M27	16.5
3	80	240	127	54	91.4	190.5	38.1	10	8	7/8	145	1	M24	12
4	100	290	159	70	116.8	235	44.5	11	8	1 1/8	170	1 1/4	M30	24
5	125	350	190	79	144.4	279.4	50.8	11	8	1 1/4	190	1 3/8	M33	38
6	150	380	235	86	171.4	317.5	55.6	13	12	1 1/8	190	1 1/4	M30	50
8	200	470	298	114	222.2	393.7	63.5	13	12	1 3/8	220	1 1/2	M36	78
10	250	545	368	127	277.4	469.9	69.9	13	16	1 3/8	235	1 1/2	M36	112
12	300	610	419	143	328.2	533.4	79.4	13	20	1 3/8	255	1 1/2	M36	148
14	350	640	451	156	360.2	558.8	85.8	13	20	1 1/2	275	1 5/8	M39	182
16	400	705	508	165	411.2	616	88.9	13	20	1 5/8	285	1 3/4	M42	193
18	450	785	565	190	462.3	685.8	101.6	13	20	1 7/8	325	2	M48	258
20	500	855	622	210	514.4	749.3	108	13	20	2	350	2 1/8	M52	317
24	600	1040	749	267	616	901.7	139.7	13	20	2 1/2	440	2 5/8	M64	608

Class 1500 Lap Joint Flange Dimensions

Size in Inch	Size in mm	Outer Diameter	Flange Thick.	Lapped Thick.	Lapped ID	PCD	Lapped Thick.	Lapped Radius	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	G
1/2	15	120	38	32	22.9	82.6	22.3	3	4	3/4	110	7/8	M20	1.8
3/4	20	130	44	35	28.2	88.9	25.4	3	4	3/4	115	7/8	M20	2.3
1	25	150	52	41	34.9	101.6	28.6	3	4	7/8	125	1	M24	3.7
1 1/4	32	160	64	41	43.7	111.1	28.6	5	4	7/8	125	1	M24	4.1
1 1/2	40	180	70	44	50	123.8	31.8	6	4	1	140	1 1/8	M27	5.5
2	50	215	105	57	62.5	165.1	38.1	8	8	7/8	145	1	M24	9.8
2 1/2	65	245	124	64	75.4	190.5	41.3	8	8	1	160	1 1/8	M27	16.4
3	80	265	133	73	91.4	203.2	47.7	10	8	1 1/8	180	1 1/4	M30	21.8
4	100	310	162	90	116.8	241.3	54	11	8	1 1/4	195	1 3/8	M33	33
5	125	375	197	105	144.4	292.1	73.1	11	8	1 1/2	250	1 5/8	M39	59
6	150	395	229	119	171.4	317.5	82.6	13	12	1 3/8	260	1 1/2	M36	75
8	200	485	292	143	222.2	393.7	92.1	13	12	1 5/8	290	1 3/4	M42	118
10	250	585	368	178	277.4	482.6	108	13	12	1 7/8	335	2	M48	198
12	300	675	451	219	328.2	571.5	123.9	13	16	2	375	2 1/8	M52	264
14	350	750	495	241	360.2	635	133.4	13	16	2 1/4	405	2 3/8	M56	341
16	400	825	552	260	411.2	704.8	146.1	13	16	2 1/2	445	2 5/8	M64	454
18	450	915	597	276	462.3	774.7	162	13	16	2 3/4	495	2 7/8	M72	590
20	500	985	641	292	514.4	831.8	177.8	13	16	3	540	3 1/8	M76	792
24	600	1170	762	330	616	990.6	203.2	13	16	3 1/2	615	3 5/8	M90	1248

Class 2500 Lap Joint Flange Dimensions

Size in Inch	Size in mm	Outer Diameter	Flange Thick.	Lapped Thick.	Lapped ID	PCD	Lapped Thick.	Lapped Radius	No of Bolts	Bolt Size UNC	RF Stud Length	Hole Size	ISO Stud Size	Weight in kg
		A	B	C	D	E	G
1/2	15	135	43	40	22.9	88.9	30.2	3	4	3/4	120	7/8	M20	3.2
3/4	20	140	51	43	28.2	95.2	31.8	3	4	3/4	125	7/8	M20	3.7
1	25	160	57	48	34.9	108	35	3	4	7/8	140	1	M24	5
1 1/4	32	185	73	52	43.7	130.2	38.1	5	4	1	150	1 1/8	M27	7.5
1 1/2	40	205	79	60	50	146	44.5	6	4	1 1/8	170	1 1/4	M30	10
2	50	235	95	70	62.5	171.4	50.9	8	8	1	180	1 1/8	M27	17.5
2 1/2	65	265	114	79	75.4	196.8	57.2	8	8	1 1/8	195	1 1/4	M30	23
3	80	305	133	92	91.4	228.6	66.7	10	8	1 1/4	220	1 3/8	M33	37.8
4	100	355	165	108	116.8	273	76.2	11	8	1 1/2	255	1 5/8	M39	57
5	125	420	203	130	144.4	323.8	92.1	11	8	1 3/4	300	1 7/8	M45	95
6	150	485	235	152	171.4	368.3	108	13	8	2	345	2 1/8	M52	148
8	200	550	305	178	222.2	438.2	127	13	12	2	380	2 1/8	M52	221
10	250	675	375	229	277.4	539.8	165.1	13	12	2 1/2	490	2 5/8	M64	425
12	300	760	441	254	328.2	619.1	184.2	13	12	2 3/4	540	2 7/8	M72	500

Types of ANSI B16.5 Lap Joint Flange

loose flange en 1092-1
ASME B16.5 lap joint flanges
lapped flange asme b16.5
lap joint reducing Flanges
sae 3000 lap joint flanges
copper lap joint flanges
lap joint flanges class 300
reducing lap joint flange
lap joint orifice flange
lap joint pipe flange
lap joint raised face flange
lap joint flat face flange

lap joint blind flange
lapped joint flange
class 150 lap joint flange
lap joint flange pn 16
loose flange pn 16
1/2 lap joint flange
150# lap joint flange
Aluminium lap joint flange
150 LB lap joint flange
300 LB lap joint flange
lap joint RTJ flange
reducing lap joint flange

lap joint flange sch 80
lapped flange joint
stainless steel lap joint flange
lap joint flange welding
carbon steel lap joint flange
class 600 lap joint flange
class 900 lap joint flange
ss lap joint flange
2 inch lap joint flange
2500# lap joint flange
jis lap joint flange
lap joint ring type joint flange

Lap Joint Flange Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality ASME B16.5 Lap Joint Flange. We supply ASME B16.47 Loose Flange to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Lap Joint Flange Export to

AfricaAlgeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Oman, Pakistan, Palestine, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Lapped Joint Flange requirement. We offer ANSI B16.5 Lap Joint Flange, and EN 1092-1 Lapped Flange which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these Class 150#, 300#, 400#, 600#, 900#, 1500#, 2500#, Lap Joint Flange at our valuable customers end. Buy Table E Lap Joint Flange at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us