Copper Nickel 90/10 Flange Supplier

Manufacturer of Copper Nickel 90/10 Threaded Flange, ASTM B151 UNS C70600 Blind Flanges, Cupro Nickel 90-10 Pipe Flange in India.

Copper Nickel 90/10 Flanges Suppliers in India

Nickel has an important effect on the physical and motorized properties of Copper Nickel 90 / 10 Flanges. And so there is also a more recent development for even higher flow rates in Cupro Nickel 90 / 10 Raised Face Flanges, which contains a chromium addition. This narrow, low-strength region can cause problems during welding procedure qualification testing of transverse bend coupons in Cupro Nickel WNR 2.0872 Flat Face Flanges, where most of the distortion is concentrated in the narrow area of forte loss. Periodic housework is necessary on seawater refrigeration systems, due to the slow formation of scaling and macro fouling during the process.
We as Metalfed Engineering are a standard exporter of Cu-Ni 90 / 10 Flanges, which are often used in offshore oil and gas platforms and processing and FPSO vessels for systems and splash zone sheathings. In addition to copper and nickel, some other elements in Copper-Nickel 90 / 10 Flanges are included for strength. Rudiments like iron and manganese are shared additions. Due to its impressive corrosion resistance, Cupro Nickel UNS C70600 Forged Flanges are most often used for marine applications. Due to the fact that the copper-nickel alloy requires no surface protection and hence gives extra safety, this copper-nickel alloy is being increasingly employed for brake and hydraulic postponement systems and cooling schemes in cars and commercial cars.

Exporter of Cu-Ni UNS C70600 Socket Weld Flange, Cupro Nickel 90-10 Orifice Flange, ASTM B151 UNS C70600 Forged Flange, 90/10 Copper Nickel 90/10 Weld Neck Flange, ASME B16.5 Copper Nickel 90/10 Threaded Flange, Cupro Nickel 90-10 SORF Flange in all Dimensions and Sizes.

Table of Content

ASTM B151 Copper Nickel 90/10 Flanges Specifications
Copper Nickel 90/10 Flanges Equivalent Grades
Cupro Nickel 90-10Flanges Chemical Composition
Copper Nickel 90/10 Flanges Mechanical Properties
Copper Nickel 90/10 Flanges Size Range
Cu-Ni 90-10 Flanges Manufacturing Standards

ASTM B151 UNS C70600 Flanges Dimensions
Cu-Ni 90-10 Flanges Weight Chart
ASTM B151 Copper Nickel 90/10 Flange Pressure Ratings
Cu-Ni 90-10 Flange Types and Prices
Copper Nickel 90/10 Flanges Applications
Cupro Nickel 90-10Flanges Exports to

Cupro Nickel 90 / 10 Ring Type Joint Flanges has excellent properties such as Corrosion Resistance; Macrofouling Reduction; Mechanical; Physical; Cryogenic; Antimicrobial; Environmental Properties; and so on. We also have huge stock of Copper Nickel 70/30 Flanges at best price in India.

Value Added Services

Epoxy Coating
Electro Polish
Sand Blasting

Testing

Intergranular Corrosion Test
Tensile Test
Hardness Test

Features

Good load bearing capacity
Excellent versatility and weldability
High tensile strength

Ready Stock of Copper Nickel 90/10 Plate Flange, Cu-Ni 90-10 Spectacle Blind Flange, ASME SB151 Copper Nickel 90/10 RTJ Flange, WERKSTOFF NR. 2.0872 Lap Joint Flange, Cu-Ni 90-10 Forged Flange, Copper Nickel 90-10 Slip-on Flange at Best Price in India.

Copper Nickel 90/10 Flanges Specifications

Product Name:	Copper Nickel 90/10 Flanges
Specifications:	ASTM B151 / ASME SB151
size:	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Dimensions:	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Standard:	ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Pressure Class:	Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS \| PN6, PN10, PN16, PN25, PN40, PN64 etc.
Coating:	Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
common types:	Forged / Screwed / Threaded / Plate
Test Certificates:	Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Flange Face Type:	Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Large Male-Female (LMF), Small Male-Female (SMF), Lap-Joint Face (LJF), Large Tongue & Groove (T&G).
Test Certificates (TC):	Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications:	Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network:	Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

ASTM B151 Copper Nickel 90/10 Flanges Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Copper Nickel 90/10	2.0872	C70600

Copper Nickel 90/10 Flanges Chemical Composition

Grade	Cu	Mn	Pb	Ni	Fe	Zn
Cu-Ni 90-10	88.6 min	1.0 max	0.05 max	9-11 max	1.8 max	1 max

Cu-Ni 90-10 Flanges Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Cu-Ni 90-10	0.323 lb/in3 at 68 F	2260 F	50000 psi	20000 psi	30 %

Copper Nickel 90/10 Flanges Size Range

Below Mentioned Cu-Ni 90-10 Flanges Size: 1/8″ – 36″
ASTM B151 Copper Nickel 90/10 Slip-On Flanges	ASTM B151 Copper Nickel 90/10 Threaded Flanges
ASTM B151 Copper Nickel 90/10 Lap Joint Flanges	ASTM B151 Cupro Nickel 90-10Plate Flanges
ASTM B151 Copper Nickel 90/10 Weld Neck Flanges	ASTM B151 Copper Nickel 90/10 Socket Weld Flanges
ASTM B151 Cu-Ni 90-10 Blind Flanges	ASTM B151 Copper Nickel 90/10 Reducing Flanges
ASTM B151 Copper Nickel 90/10 Ring Type Joint Flanges	ASTM B151 Cupro Nickel 90-10Square Flanges
ASTM B151 Copper Nickel 90/10 Orifice Flanges	ASTM B151 Copper Nickel 90/10 Forged Flanges

Copper Nickel 90/10 UNS C70600 Pipe Flanges Manufacturing Standards

American Steel Flanges Standard
Standard Name	Standard Code
Forged Flanges	ANSI ASME SB-151
Lap joint flange, Welding neck flange, Slip on flange, Threaded flange, Blind flange, RTJ flange	ANSI ASME B16.5
Blind flange, Welding neck flange	ASME – B 16.47
Welding neck flange, Slip on flange	ASME – B 16.36
German Steel Flanges Standard
BLRF, Steel Blind Flanges	DIN 2527
Flat Flange for Welding (Slip On)	DIN 2573 / 2576
Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)	DIN 2673
Lapped / Loose (Lap Joint) Flanges Plain Collars	DIN 2641 / 2642
Long Neck Welding Flanges	DIN 28115
Copper Nickel 90/10 PN10 Flanges, DIN PN 10 Flanges, PN16 Flange	DIN PN10, PN16
Copper Nickel 90/10 PN20 Flanges, DIN PN 25 Flanges	DIN PN20, PN25
Copper Nickel 90/10 PN40 Flanges, DIN PN 50 Flanges	DIN PN40, PN50
Japanese Steel Flanges Standard
Slip-on Hub (SOH), Slip-on plate flange (SOP), Welding neck flange (WN), Socket Welding flange (SW), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)	JIS 200220
Socket Welding flange (SW), Slip-on plate flange (SOP), Welding neck flange (WN), Slip-on Hub (SOH), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)	JIS 200291
Copper Nickel 90/10 5K SORF Flanges, 10K SOFF Flanges	JIS 5K, 10K
Cupro Nickel 90-1016K Blind Flanges, 20K BLRF Flanges	JIS 16K, 20K
Copper Nickel 90/10 30K Slip on Flanges, 40K Blind Flanges	JIS 30K, 40K
Italian Flanges Standard
Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)	UNI Flanges
British Standard Pipe Flanges Standard
Copper Nickel 90/10 BS 10 Table D Flanges, Table D Pipe Flange	BS 10 Table D
Copper Nickel 90/10 BS 10 Table E Flanges, Table E Pipe Flange	BS 10 Table E
Copper Nickel 90/10 BS 10 Table E Flanges, Table E Flanges	BS 10 Table F
Copper Nickel 90/10 BS 10 Table E Flanges, Table E Pipe Flanges	BS 10 Table H

Cu-Ni 90-10 Flanges Dimensions

Copper Nickel 90/10 Flanges are commonly used to connect valves into pipework making it easier for removal and maintenance. There are many common flange standards and flanges within the same standard can etiher be flat or raised face. Below is a reference table for critical flange dimensions.

Standard	Class	Diameter	Bolt Circle Diameter	Number of Bolts	Bolt Size	Diameter of Bolt Hole
15mm (1/2″)
ANSI B16.5	ANSI 150	89	60	4	13	16
	ANSI 300	95	67	4	13	16
	ANSI 600	95	67	4	13	16
	ANSI 900	121	83	4	19	22
	ANSI 1500	121	83	4	19	22
20mm (3/4″)
ANSI B16.5	ANSI 150	98	70	4	13	16
	ANSI 300	117	83	4	16	19
	ANSI 600	117	83	4	16	19
	ANSI 900	130	89	4	19	22
	ANSI 1500	130	89	4	19	22
25mm (1″)
ANSI B16.5	ANSI 150	110	79	4	13	16
	ANSI 300	125	89	4	16	19
	ANSI 600	125	89	4	16	19
	ANSI 900		102	4	22	25
	ANSI 1500		102	4	22	25
32mm (1 1/4″)
ANSI B16.5	ANSI 150	117	89	4	13	16
	ANSI 300	133	98	4	16	19
	ANSI 600	133	98	4	16	19
	ANSI 900	159	111	4	22	25
	ANSI 1500	159	111	4	22	25
40mm (1 1/2″)
ANSI B16.5	ANSI 150	127	98	4	13	16
	ANSI 300	156	114	4	19	22
	ANSI 600	156	114	4	19	22
	ANSI 900	178	124	4	25	29
	ANSI 1500	178	124	4	25	29
50mm (2″)
ANSI B16.5	ANSI 150	152	121	4	16	19
	ANSI 300	165	127	8	16	19
	ANSI 600	165	127	8	16	19
	ANSI 900	216	165	8	22	25
	ANSI 1500	216	165	8	22	25
65mm (2 1/2″)
ANSI B16.5	ANSI 150	178	140	4	16	19
	ANSI 300	191	149	8	19	22
	ANSI 600	191	149	8	19	22
	ANSI 900	244	191	8	22	25
	ANSI 1500	244	191	8	25	29
80mm (3″)
ANSI B16.5	ANSI 150	191	152	4	16	19
	ANSI 300	210	168	8	19	22
	ANSI 600	210	168	8	19	22
	ANSI 900	241	192	8	22	25
	ANSI 1500	267	203	8	29	32
100mm (4″)
ANSI B16.5	ANSI 150	229	191	8	16	19
	ANSI 300	254	200	8	19	22
	ANSI 600	273	216	8	22	25
	ANSI 900	292	235	8	29	32
	ANSI 1500	311	241	8	32	35
125mm (5″)
ANSI B16.5	ANSI 150	254	216	8	19	22
	ANSI 300	279	235	8	19	22
	ANSI 600	330	267	8	25	29
	ANSI 900	349	279	8	32	35
	ANSI 1500	375	292	8	38	41
150mm (6″)
ANSI B16.5	ANSI 150	279	241	8	19	22
	ANSI 300	318	270	12	19	22
	ANSI 600	356	292	12	25	29
	ANSI 900	381	318	12	29	32
	ANSI 1500	394	318	12	35	38
200mm (8″)
ANSI B16.5	ANSI 150	343	298	8	19	22
	ANSI 300	381	330	12	19	22
	ANSI 600	419	349	12	29	32
	ANSI 900	470	394	12	35	38
	ANSI 1500	483	394	12	41	44
250mm (10″)
ANSI B16.5	ANSI 150	406	362	12	22	25
	ANSI 300	445	387	16	25	29
	ANSI 600	508	432	16	32	35
	ANSI 900	546	470	16	35	38
	ANSI 1500	584	483	12	41	51
300mm (12″)
ANSI B16.5	ANSI 150	483	432	12	22	25
	ANSI 300	521	451	16	29	32
	ANSI 600	559	489	20	32	35
	ANSI 900	610	533	20	35	38
	ANSI 1500	673	571	16	51	54
350mm (14″)
ANSI B16.5	ANSI 150	533	476	12	25	29
	ANSI 300	584	514	20	29	32
	ANSI 600	603	527	20	38	41
	ANSI 900	641	559	20	38	41
	ANSI 1500	749	635	16	57	60
400mm (16″)
ANSI B16.5	ANSI 150	597	540	16	25	29
	ANSI 300	648	572	20	32	35
	ANSI 600	686	603	20	38	41
	ANSI 900	705	616	20	41	44
	ANSI 1500	826	705	16	64	67
450mm (18″)
ANSI B16.5	ANSI 150 Flange	635	578	16	29	32
	ANSI 300 Flange	711	629	24	32	35
	ANSI 600 Flange	743	654	20	41	44
	ANSI 900 Flange	787	686	20	48	51
	ANSI 1500 Flange	914	775	16	70	73
500mm (20″)
ANSI B16.5	ANSI 150 Flange	699	635	20	29	32
	ANSI 300 Flange	775	686	24	32	35
	ANSI 600 Flange	813	724	24	41	44
	ANSI 900 Flange	857	749	20	51	54
	ANSI 1500 Flange	984	832	16	76	79
600mm (24″)
ANSI B16.5	ANSI 150 Flanges	813	749	20	32	35
	ANSI 300 Flanges	914	813	24	38	41
	ANSI 600 Flanges	940	838	24	48	51
	ANSI 900 Flanges	1041	902	20	64	67
	ANSI 1500 Flanges	1168	991	16	89	92

Weight Chart of Cu-Ni 90-10 Flanges

Pipe Normal Diam.		O.D. Flange	Thk. Of Flange Min	Diam. of Hub	Diameter of Raised Face	Length Hub.Y	Thread Length	Diam. of Bolt Circle	Diam. of Bolt Holes	Number of Bolts	Diam. of Bolts (inch)	KG	LB
inch	dn	O	C	X	G	Y	T	BC	BH	BN	BD
1/2"	15	89.00	11.20	30.20	35.10	15.70	15.70	60.50	15.80	4	1/2"	0.4	0.9
3/4"	20	98.50	12.70	38.10	42.90	15.70	15.70	69.90	15.80	4	1/2"	0.7	1.5
1"	25	108.00	14.20	49.30	50.80	17.50	17.50	79.30	15.80	4	1/2"	0.8	1.8
1-1/4"	32	117.50	15.70	58.70	63.50	20.60	20.60	88.90	15.80	4	1/2"	1.2	2.6
1-1/2"	40	127.00	17.50	65.00	73.20	22.40	22.40	98.60	15.80	4	1/2"	1.5	3.3
2"	50	152.50	19.10	77.70	91.90	25.40	25.40	120.70	19.10	4	5/8"	2.3	5.1
2-1/2"	65	178.00	22.40	90.40	104.60	28.40	28.40	139.70	19.10	4	5/8"	3.7	8.1
3"	80	190.50	23.90	108.00	127.00	30.20	30.20	152.40	19.10	4	5/8"	4.1	9
3-1/2"	90	216.00	23.90	122.20	139.70	31.80	31.80	177.80	19.10	8	5/8"	5.1	11.2
4"	100	228.50	23.90	134.90	157.20	33.30	33.30	190.50	19.10	8	5/8"	5.9	13
5"	125	254.00	23.90	163.60	185.70	36.60	36.60	215.90	22.40	8	3/4"	7	15.4
6"	150	279.50	25.40	192.00	215.90	39.60	39.60	241.30	22.40	8	3/4"	8.4	18.5
8"	200	343.00	28.40	246.10	269.70	44.50	44.50	298.50	22.40	8	3/4"	13	28.6
10"	250	406.50	30.20	304.80	323.90	49.30	49.30	362.00	25.40	12	7/8"	18	39.5
12"	300	482.50	31.80	365.30	381.00	55.60	55.60	431.80	25.40	12	7/8"	29	64
14"	350	533.50	35.10	400.10	412.80	57.20	57.20	476.30	28.50	12	1"	39	86
16"	400	597.00	36.60	457.20	469.90	63.50	63.50	539.80	28.50	16	1"	47	103
18"	450	635.00	39.60	505.00	533.40	68.30	68.30	577.90	31.80	16	1 1/8"	57	126
20"	500	698.50	42.90	558.80	584.20	73.20	73.20	635.00	31.80	20	1 1/8"	76	167
24"	600	813.00	47.80	663.40	692.20	82.60	82.60	749.30	35.10	20	1 1/4"	97	214

Schedule Class of ASTM B151 Copper Nickel 90/10 Flanges

Pipe Size – Pipe Flanges	Flange Schedule/Class	Flange Material	Flange Connection Type	Max. Pressure
1/2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	FNPT	150 psi
1/2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
1/2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Welded	150 psi
3/4"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	FNPT	150 psi
3/4"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
1-1/4"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
1-1/2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	FNPT	150 psi
2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
2-1/2"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
3"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
4"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	FNPT	150 psi
4"	ASME B16.5 Class 150	Copper Nickel 90/10 Flanges	Socket Weld	275 psi
1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1-1/4"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	FNPT	720 psi
1-1/4"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1-1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
1-1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
2-1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
2-1/2"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
3"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
3"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
4"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi
4"	ASME B16.5 Class 300	Copper Nickel 90/10 Flanges	Slip On	720 psi

400 Copper Nickel 90/10 Alloy Flanges Pressure Rating

ANSI/ASME B16.34	PRESSURE RATING CHART
Temperature °F	150#	300#	400#	600#	900#	1500#	2500#
-20 to 100	275	720	960	1440	2160	3600	6000
200	230	600	800	1200	1800	3000	5000
300	205	540	720	1080	1620	2700	4500
400	190	495	660	995	1490	2485	4140
500	170	465	620	930	1395	2330	3880
600	140	435	580	875	1310	2185	3640
650	125	430	575	860	1290	2150	3580
700	110	425	565	850	1275	2125	3540
750	95	415	555	830	1245	2075	3460
800	80	405	540	805	1210	2015	3360
850	65	395	530	790	1190	1980	3300
900	50	390	520	780	1165	1945	3240
950	35	380	510	765	1145	1910	3180
1000	20	320	430	640	965	1605	2675
1050	20	310	410	615	925	1545	2570
1100	20	255	345	515	770	1285	2145
1150	20	200	265	400	595	995	1655
1200	20	155	205	310	465	770	1285
1250	20	115	150	225	340	565	945
1300	20	85	115	170	255	430	715
1350	20	60	80	125	185	310	515
1400	20	50	65	95	145	240	400
1450	15	35	45	70	105	170	285
1500	10	25	35	55	80	135	230

Copper Nickel 90/10 Flanges Types and Prices

Slip-on Flanges

Copper Nickel 90/10 Slip-on Flanges
Price: $10-$60 / Kilogram

Weld Neck Flanges

Copper Nickel 90/10 Weld Neck Flanges
Price: US$1.98

Blind Flanges

Copper Nickel 90/10 Blind Flanges
Price: US$10.23

Socket Weld Flanges

Copper Nickel 90/10 Socket Weld Flanges
Price: US$10-30

Orifice Flanges

Copper Nickel 90/10 Orifice Flanges (Weld Neck /Slip On/ Threaded Flanges)
Price: US$20-50

Threaded Flanges

Copper Nickel 90/10 Threaded Flanges
Price: US$5.98

Lap Joint Flanges

Copper Nickel 90/10 Lap Joint Flanges
Price: US$0.30

Spectacle Blind Flanges

Copper Nickel 90/10 Spectacle Blind Flanges
Price: US$1.98

Ring Type Joint Flanges

Copper Nickel 90/10 Ring Type Joint Flanges
Price: US$20

Forged Flanges

Copper Nickel 90/10 Forged Flanges
Price: US$10-20

Flat Face Flange

Copper Nickel 90/10 Flat Face Flange
Price: US$2.00

Tongue and Groove Flanges

Copper Nickel 90/10 (T & G) Flanges
Price: US$30

Plate Flanges

Copper Nickel 90/10 Plate Flanges
Price: US$10-50

API Type 6BX Flanges

Copper Nickel 90/10 API Type 6BX (Weld Neck / Threaded) Flanges
Price: US$20-30

BS 10 Flanges

Copper Nickel 90/10 BS 10 Flanges
Price: US$10-40

API Type 6B Flanges

Copper Nickel 90/10 API Type 6B (Weld Neck/ Threaded) Flanges
Price: US$10-40

Paddle Blank and Spacer

Copper Nickel 90/10 Paddle Blank and Spacer (RTJ Male Paddle Blank and Spacer)
Price: US$2.00

Compact Flanges

Copper Nickel 90/10 Compact Flange (Swivel / Blind)
Price: US$1.98

Series A / B Weldneck Flange

Copper Nickel 90/10 Series A / B Weldneck Flange
Price: US$1.98

Series A/ B Blind Flange

Copper Nickel 90/10 Series A / B Blind Flange
Price: US$1.10

Threaded Reducing Flange

Copper Nickel 90/10 Threaded Reducing Flange
Price: US$0.20

Figure 8 Flange (RTJ Male)

Copper Nickel 90/10 Figure 8 Flange (RTJ Male)
Price: US$3.00

Male and Female Flange

Copper Nickel 90/10 Male and Female Flange
Price: US$2.00

Flangeolet

Copper Nickel 90/10 Flangeolet
Price: US$10-50

Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

ASTM B151 Cu-Ni 90-10 Flanges – Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are one of the oldest Manufacturers, Exporters, and Suppliers of high quality Copper Nickel 90/10 Slip On Flanges. We supply ANSI B16.5 Cu-Ni 90-10 Weld Neck Flanges to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of ASTM B151 Copper Nickel 90/10 Flanges Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Copper Nickel 90/10 Flanges requirement. We offer Cupro Nickel 90-10 SORF Flanges, and Cu-Ni 90-10 Blind Flanges which are accurately designed to provide satisfaction to our customers. We have ready stock of Cu-Ni 90-10 Socket Weld Flange, Copper Nickel 90/10 Orifice Flange, Cu-Ni 90-10 Lap Joint Flange, Cu-Ni 90-10 Spectacle Blind Flange, Copper Nickel 90/10 RTJ Flange at our valuable customers end. Buy Copper Nickel 90/10 Flangeat a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us