Paddle Blank and Spacer Suppliers

Manufacturer of Paddle Blank B16.48, Spade Blind, Paddle Spacer Flange, Spade and Ring Spacers, Paddle Blind Flange Dimensions

Paddle and Spade Blank Suppliers in India

We as Metalfed Engineering are a prominent supplier and seller of Paddle Blank and Spacer Flange, which have good or excellent corrosion resistance under normal conditions. Heat these RTJ Male Paddle Blank and Spacer to 260°C – 482°C (400°F – 900°F) and then air cool. Temperatures above this range for Paddle Blank B16.48 will result in deposits and a reduction in the material’s processability. Because of the high level of work hardening, such products may require intermediate annealing for heavy drawing and forming operations. Optimum corrosion resistance of this Stainless Steel Ring Type Joint Male Paddle Spacer Flanges can be achieved by cold working rather than annealing. Its hardness and resilience make it suitable for structural applications.
Carbon Steel RTJ Male Paddle Blank Flanges can be continuously exposed to a maximum of 1600 degrees F (871 degrees C) without significant scaling. Paddle Spacer Flange is non-magnetic in the annealed condition but becomes magnetic when cold worked. Spade and Ring Spacers are used in aircraft structural parts, trailer bodies, architecture (roof drains/door frames etc.).

Recognized Exporter of Paddle Spacer RTJ, Spade Spacer, Paddle Blank Blind, Paddle Spacer Flange, Stainless Steel Paddle Blank and Spacer in all Dimensions.

Table of Content

Paddle and Blank Spacer Specifications
Paddle Blank B16.48 Materials and Grades
Paddle Blank Spade Dimensions
Paddle Blank and Spacer Weight

ASME B16.48 Paddle Blank and Spacer Types
Paddle Blank Flange Applications
ASME B16.5 Paddle Blank and Spacer Export to

The mechanical and physical properties of this alloy make it an ideal material for a variety of industrial and consumer product applications. Forging should start at 2000°F – 2200°F (1093°C – 1204°C) and finish at 1700°F (927°C). Super Duplex Steel RTJ Male Paddle Blank Flanges is austenitic steel with a nominal composition of chromium and nickel, supplied in various tempers/temperatures depending on the strength required.

Ready Stockist of Carbon Steel Paddle Blank and Spacer, Alloy Steel Paddle Blank and Spacer, Spade and Ring Spacer, Paddle Blank and Paddle Spacer, Paddle Spacer and Blind at Best Prices.

Paddle Blank and Spacer Specifications

Product Name:	Paddle Blank and Spacer
Size Chart:	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Dimensions:	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Rating ANSI:	Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN:	PN6 PN10 PN16 PN25 PN40 PN64 / 6Bar 10Bar 16Bar 25Bar 40Bar
Coating/Surface Treatment:	Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type/Flange Face Type:	RF-Rasied Face, FF-Male and Female, LMF-Large Male-Female, LJF-Lap-Joint Face, SMF-Small Male-Female, Small Tongue, Large Tongue & Groove, Groove
Custom Flange/Special Design:	As per your drawing
Standards:	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, GOST Flange, MSS SP44, ISO70051, BS1560-3.1, JISB2220, API7S-43, API7S-15, API605, EN1092
Flange Test:	Direct-reading Spectrograph, X-ray detector, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Flanges Equipment:	Press machine, Pushing Machine, Bending machine, electric bevelling machine, Sand-blasting machine, etc
Manufacturers of:	DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British Standard (BS) ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM A182 Threaded Reducing Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Test Certificates:	Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications:	Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders, Offshore, Piping Projects etc.
Export Network:	Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Paddle Blank and Spacer Materials and Grades

Duplex Steel Paddle Blank and Spacer:	ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Super Duplex Paddle Blank and Spacer:	ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Stainless Steel Paddle Blank and Spacer:	ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Nickel Alloys Paddle Blank and Spacer:	ASTM SB564, SB160, SB472, SB162 – Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
Alloys Paddle Blank and Spacer:	Alloy 20, Alloy C, Alloy C276, Alloy B2
Carbon Steel Paddle Blank and Spacer:	ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52
Copper Alloys Paddle Blank and Spacer:	ASTM SB 61, SB62, SB151, SB152 – UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Low Temperature Steel Paddle Blank and Spacer:	ASTM A350 LF2, LF3, LF6
High Yield Paddle Blank and Spacer:	ASTM A694 F42, F52, F60, F65, F70
Alloy Steel Paddle Blank and Spacer:	ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Titanium Paddle Blank and Spacer:	Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Brass Paddle Blank and Spacer:	2604 / 3602 / H59 / H62 / etc.
Aluminium Paddle Blank and Spacer:	2017 / 5052 / 6063 / 6061 / 7075 etc.
Alloy 20 Paddle Blank and Spacer:	ASME SB462 / ASTM B462, Carpenter® 20 Alloy, Alloy 20Cb-3
Nimonic Paddle Blank and Spacer:	Nimonic 80A, Nimonic 75, Nimonic 90
254 SMO Paddle Blank and Spacer:	ASME SA182 / ASTM A182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Other Paddle Blank and Spacer Material:	Tin bronze, Alumunum bronze, Lead bronze

Paddle Blank and Spacer Dimensions, Paddle Blank and Spacer Weight

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	45	16	126	3	32
3/4	54	21	131	3	32
1	64	27	136	3	32
1.1/4	73	42	145	6.4	32
1.1/2	83	48	145	6.4	32
2	102	61	155	6.4	32
2.1/2	107	73	170	6.4	32
3	133	89	170	6.4	32
3.1/2	159	102	202	9.7	38
4	172	114	202	9.7	38
5	194	141	225	9.7	38
6	219	168	225	12.7	38
8	276	219	267	12.7	38
10	337	273	322	15.7	44
12	406	324	357	19.1	44
14	448	356	378	19.1	44
16	511	406	410	22.4	44
18	546	457	427	25.4	51
20	603	508	455	28.4	51
24	714	610	512	31.8	51

Class 300 Paddle Blank and Spacer Dimensions

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	51	16	129	6.4	32
3/4	64	21	136	6.4	32
1	70	27	139	6.4	32
1.1/4	79	42	150	6.4	32
1.1/2	92	48	150	6.4	32
2	108	61	158	9.7	32
2.1/2	127	73	177	9.7	32
3	146	89	177	9.7	32
3.1/2	162	102	205	12.7	38
4	178	114	205	12.7	38
5	213	141	240	15.7	38
6	248	168	240	15.7	38
8	305	219	281	22.4	38
10	359	273	333	25.4	44
12	419	324	363	28.4	44
14	483	356	395	31.8	44
16	536	406	422	38.1	44
18	594	457	450	41.1	51
20	651	508	480	44.5	51
24	772	610	540	50.8	51

Class 600 Paddle Blank and Spacer Dimensions

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	51	16	129	6.4	32
3/4	64	21	136	6.4	32
1	70	27	139	6.4	32
1.1/4	79	37	150	9.7	32
1.1/2	92	43	150	9.7	32
2	108	55	158	9.7	32
2.1/2	127	67	177	12.7	32
3	146	83	177	12.7	32
3.1/2	159	96	211	15.7	38
4	191	108	211	15.7	38
5	238	135	248	19.1	38
6	264	162	248	22.4	38
8	318	212	288	28.4	38
10	397	265	352	35.1	44
12	454	315	381	41.1	44
14	489	346	398	44.5	44
16	562	397	435	50.8	44
18	610	448	459	53.8	51
20	679	497	493	63.5	51
24	787	597	547	73.2	51

Class 900 Paddle Blank and Spacer Dimensions

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	60	16	134	6.4	32
3/4	67	21	137	6.4	32
1	76	27	142	6.4	32
1.1/4	86	37	151	9.7	32
1.1/2	95	43	151	9.7	32
2	140	55	174	12.7	32
2.1/2	162	67	186	12.7	32
3	165	83	186	15.7	32
4	203	108	217	19.1	38
5	244	135	259	22.4	38
6	286	162	259	25.4	38
8	356	212	307	35.1	38
10	432	265	370	41.1	44
12	495	315	401	47.8	44
14	518	346	412	53.8	44
16	572	397	440	60.5	44
18	635	448	471	66.5	51
20	696	497	501	73.2	51
24	835	597	571	88.9	51

Class 1500 Paddle Blank and Spacer Dimensions

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	61	16	135	6.4	32
3/4	67	21	137	9.7	32
1	76	27	142	9.7	32
1.1/4	86	35	151	9.7	32
1.1/2	95	41	151	12.7	32
2	140	53	174	12.7	32
2.1/2	162	63	190	15.7	32
3	172	78	190	19.1	32
4	206	102	219	22.4	38
5	251	128	256	28.4	38
6	279	154	256	35.1	38
8	349	203	303	41.1	38
10	432	255	370	50.8	44
12	518	303	412	60.5	44
14	575	333	442	66.5	44
16	638	381	472	76.2	44
18	702	429	504	85.9	51
20	752	478	530	95.3	51
24	899	575	603	111.3	51

Class 2500 Paddle Blank and Spacer Dimensions

NPS	Outside Dia A	Inside Dia B	Center to End C	Thick ness t	Handle Width W
1/2	67	16	137	9.7	32
3/4	73	21	140	9.7	32
1	83	27	145	9.7	32
1.1/4	102	35	161	12.7	32
1.1/2	114	41	161	15.7	32
2	143	53	175	15.7	32
2.1/2	165	63	201	19.1	32
3	194	78	201	22.4	32
4	232	102	232	28.4	38
5	276	128	273	35.1	38
6	314	154	273	41.1	38
8	384	198	321	53.8	38
10	473	248	390	66.5	44
12	546	289	427	79.2	44

General notes:

Dimensions are in millimeters unless otherwise indicated.
Spade Handles shall be solid with NO openings.

ASME B16.5 Paddle Blank and Spacers Types

B16.48 Paddle Blank and Spacers
Paddle Blind Flange
Stainless Steel Paddle Blank
Paddle Blank and Spacer Dimensions
Paddle Blank and Spacer B16.48
Spade and Spacers
Stainless Steel Paddle Blank and Spacers
SS Paddle Blank and Spacer
Paddle Blank Spade
Paddle Blank ASME B16.48

Paddle Blank Flange
Paddle Blank and Paddle Blind
Carbon Steel Paddle Blank and Spacer
ASME B16.48 Spade Blinds
Spade Paddle Blanks and Blinds
Ring Spacer Flange
Paddle Spacer Flange
Paddle Spacer and Blind Flange
Paddle Spacer RTJ
Flat Faced Paddle Blanks

Paddle Blank and Spacer Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality ASME B16.5 Paddle Blank and Spacer. We supply Paddle Spacer Flange to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Paddle Blank and Spacer Export to

AfricaAlgeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Oman, Pakistan, Palestine, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Paddle Blind Flange requirement. We offer Paddle Blank and Spacer, and Spade Spacer which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these ASME B16.48 Paddle Blank at our valuable customers end. Buy Paddle Blank and Spacerat a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us