Site icon Trusted Industrial Flanges Manufacturers, Pipe Fittings Suppliers

Paddle Blank and Spacer Suppliers

Manufacturer of Paddle Blank B16.48, Spade Blind, Paddle Spacer Flange, Spade and Ring Spacers, Paddle Blind Flange Dimensions

Paddle and Spade Blank Suppliers in India

We as Metalfed Engineering are a prominent supplier and seller of Paddle Blank and Spacer Flange, which have good or excellent corrosion resistance under normal conditions. Heat these RTJ Male Paddle Blank and Spacer to 260°C – 482°C (400°F – 900°F) and then air cool. Temperatures above this range for Paddle Blank B16.48 will result in deposits and a reduction in the material’s processability. Because of the high level of work hardening, such products may require intermediate annealing for heavy drawing and forming operations. Optimum corrosion resistance of this Stainless Steel Ring Type Joint Male Paddle Spacer Flanges can be achieved by cold working rather than annealing. Its hardness and resilience make it suitable for structural applications.
Carbon Steel RTJ Male Paddle Blank Flanges can be continuously exposed to a maximum of 1600 degrees F (871 degrees C) without significant scaling. Paddle Spacer Flange is non-magnetic in the annealed condition but becomes magnetic when cold worked. Spade and Ring Spacers are used in aircraft structural parts, trailer bodies, architecture (roof drains/door frames etc.).

Recognized Exporter of Paddle Spacer RTJ, Spade Spacer, Paddle Blank Blind, Paddle Spacer Flange, Stainless Steel Paddle Blank and Spacer in all Dimensions.

Table of Content

The mechanical and physical properties of this alloy make it an ideal material for a variety of industrial and consumer product applications. Forging should start at 2000°F – 2200°F (1093°C – 1204°C) and finish at 1700°F (927°C). Super Duplex Steel RTJ Male Paddle Blank Flanges is austenitic steel with a nominal composition of chromium and nickel, supplied in various tempers/temperatures depending on the strength required.

Ready Stockist of Carbon Steel Paddle Blank and Spacer, Alloy Steel Paddle Blank and Spacer, Spade and Ring Spacer, Paddle Blank and Paddle Spacer, Paddle Spacer and Blind at Best Prices.

Paddle Blank and Spacer Specifications
Product Name: Paddle Blank and Spacer
Size Chart: 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Rating ANSI: Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN: PN6 PN10 PN16 PN25 PN40 PN64 / 6Bar 10Bar 16Bar 25Bar 40Bar
Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Connection Type/Flange Face Type: RF-Rasied Face, FF-Male and Female, LMF-Large Male-Female, LJF-Lap-Joint Face, SMF-Small Male-Female, Small Tongue, Large Tongue & Groove, Groove
Custom Flange/Special Design: As per your drawing
Standards: ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, ASME/ANSI B16.5/16.36/16.47A/16.47B, GOST Flange, MSS SP44, ISO70051, BS1560-3.1, JISB2220, API7S-43, API7S-15, API605, EN1092
Flange Test: Direct-reading Spectrograph, X-ray detector, Hydrostatic testing machine, UI trasonic flaw detector, Magnetic particle detector
Flanges Equipment: Press machine, Pushing Machine, Bending machine, electric bevelling machine, Sand-blasting machine, etc
Manufacturers of: DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British Standard (BS)
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
ASTM A182 Threaded Reducing Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders, Offshore, Piping Projects etc.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Paddle Blank and Spacer Materials and Grades
Duplex Steel Paddle Blank and Spacer: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Super Duplex Paddle Blank and Spacer: ASTM / ASME A/SA 182 F44, F45, F51, F53, F55, F60, F61
Stainless Steel Paddle Blank and Spacer: ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Nickel Alloys Paddle Blank and Spacer: ASTM SB564, SB160, SB472, SB162 – Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
Alloys Paddle Blank and Spacer: Alloy 20, Alloy C, Alloy C276, Alloy B2
Carbon Steel Paddle Blank and Spacer: ASTM / ASME A/SA 105 ASTM / ASME A 350, ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52
Copper Alloys Paddle Blank and Spacer: ASTM SB 61, SB62, SB151, SB152 – UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Low Temperature Steel Paddle Blank and Spacer: ASTM A350 LF2, LF3, LF6
High Yield Paddle Blank and Spacer: ASTM A694 F42, F52, F60, F65, F70
Alloy Steel Paddle Blank and Spacer: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Titanium Paddle Blank and Spacer: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Brass Paddle Blank and Spacer: 2604 / 3602 / H59 / H62 / etc.
Aluminium Paddle Blank and Spacer: 2017 / 5052 / 6063 / 6061 / 7075 etc.
Alloy 20 Paddle Blank and Spacer: ASME SB462 / ASTM B462, Carpenter® 20 Alloy, Alloy 20Cb-3
Nimonic Paddle Blank and Spacer: Nimonic 80A, Nimonic 75, Nimonic 90
254 SMO Paddle Blank and Spacer: ASME SA182 / ASTM A182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Other Paddle Blank and Spacer Material: Tin bronze, Alumunum bronze, Lead bronze

Paddle Blank and Spacer Dimensions, Paddle Blank and Spacer Weight

NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 45 16 126 3 32
3/4 54 21 131 3 32
1 64 27 136 3 32
1.1/4 73 42 145 6.4 32
1.1/2 83 48 145 6.4 32
2 102 61 155 6.4 32
2.1/2 107 73 170 6.4 32
3 133 89 170 6.4 32
3.1/2 159 102 202 9.7 38
4 172 114 202 9.7 38
5 194 141 225 9.7 38
6 219 168 225 12.7 38
8 276 219 267 12.7 38
10 337 273 322 15.7 44
12 406 324 357 19.1 44
14 448 356 378 19.1 44
16 511 406 410 22.4 44
18 546 457 427 25.4 51
20 603 508 455 28.4 51
24 714 610 512 31.8 51
Class 300 Paddle Blank and Spacer Dimensions
NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 51 16 129 6.4 32
3/4 64 21 136 6.4 32
1 70 27 139 6.4 32
1.1/4 79 42 150 6.4 32
1.1/2 92 48 150 6.4 32
2 108 61 158 9.7 32
2.1/2 127 73 177 9.7 32
3 146 89 177 9.7 32
3.1/2 162 102 205 12.7 38
4 178 114 205 12.7 38
5 213 141 240 15.7 38
6 248 168 240 15.7 38
8 305 219 281 22.4 38
10 359 273 333 25.4 44
12 419 324 363 28.4 44
14 483 356 395 31.8 44
16 536 406 422 38.1 44
18 594 457 450 41.1 51
20 651 508 480 44.5 51
24 772 610 540 50.8 51
Class 600 Paddle Blank and Spacer Dimensions
NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 51 16 129 6.4 32
3/4 64 21 136 6.4 32
1 70 27 139 6.4 32
1.1/4 79 37 150 9.7 32
1.1/2 92 43 150 9.7 32
2 108 55 158 9.7 32
2.1/2 127 67 177 12.7 32
3 146 83 177 12.7 32
3.1/2 159 96 211 15.7 38
4 191 108 211 15.7 38
5 238 135 248 19.1 38
6 264 162 248 22.4 38
8 318 212 288 28.4 38
10 397 265 352 35.1 44
12 454 315 381 41.1 44
14 489 346 398 44.5 44
16 562 397 435 50.8 44
18 610 448 459 53.8 51
20 679 497 493 63.5 51
24 787 597 547 73.2 51
Class 900 Paddle Blank and Spacer Dimensions
NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 60 16 134 6.4 32
3/4 67 21 137 6.4 32
1 76 27 142 6.4 32
1.1/4 86 37 151 9.7 32
1.1/2 95 43 151 9.7 32
2 140 55 174 12.7 32
2.1/2 162 67 186 12.7 32
3 165 83 186 15.7 32
4 203 108 217 19.1 38
5 244 135 259 22.4 38
6 286 162 259 25.4 38
8 356 212 307 35.1 38
10 432 265 370 41.1 44
12 495 315 401 47.8 44
14 518 346 412 53.8 44
16 572 397 440 60.5 44
18 635 448 471 66.5 51
20 696 497 501 73.2 51
24 835 597 571 88.9 51
Class 1500 Paddle Blank and Spacer Dimensions
NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 61 16 135 6.4 32
3/4 67 21 137 9.7 32
1 76 27 142 9.7 32
1.1/4 86 35 151 9.7 32
1.1/2 95 41 151 12.7 32
2 140 53 174 12.7 32
2.1/2 162 63 190 15.7 32
3 172 78 190 19.1 32
4 206 102 219 22.4 38
5 251 128 256 28.4 38
6 279 154 256 35.1 38
8 349 203 303 41.1 38
10 432 255 370 50.8 44
12 518 303 412 60.5 44
14 575 333 442 66.5 44
16 638 381 472 76.2 44
18 702 429 504 85.9 51
20 752 478 530 95.3 51
24 899 575 603 111.3 51
Class 2500 Paddle Blank and Spacer Dimensions
NPS Outside
Dia
A		 Inside
Dia
B		 Center
to
End
C		 Thick
ness
t		 Handle
Width
W
1/2 67 16 137 9.7 32
3/4 73 21 140 9.7 32
1 83 27 145 9.7 32
1.1/4 102 35 161 12.7 32
1.1/2 114 41 161 15.7 32
2 143 53 175 15.7 32
2.1/2 165 63 201 19.1 32
3 194 78 201 22.4 32
4 232 102 232 28.4 38
5 276 128 273 35.1 38
6 314 154 273 41.1 38
8 384 198 321 53.8 38
10 473 248 390 66.5 44
12 546 289 427 79.2 44

General notes:

  • Dimensions are in millimeters unless otherwise indicated.
  • Spade Handles shall be solid with NO openings.

ASME B16.5 Paddle Blank and Spacers Types
  • B16.48 Paddle Blank and Spacers
  • Paddle Blind Flange
  • Stainless Steel Paddle Blank
  • Paddle Blank and Spacer Dimensions
  • Paddle Blank and Spacer B16.48
  • Spade and Spacers
  • Stainless Steel Paddle Blank and Spacers
  • SS Paddle Blank and Spacer
  • Paddle Blank Spade
  • Paddle Blank ASME B16.48
  • Paddle Blank Flange
  • Paddle Blank and Paddle Blind
  • Carbon Steel Paddle Blank and Spacer
  • ASME B16.48 Spade Blinds
  • Spade Paddle Blanks and Blinds
  • Ring Spacer Flange
  • Paddle Spacer Flange
  • Paddle Spacer and Blind Flange
  • Paddle Spacer RTJ
  • Flat Faced Paddle Blanks

Paddle Blank and Spacer Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality ASME B16.5 Paddle Blank and Spacer. We supply Paddle Spacer Flange to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Paddle Blank and Spacer Export to

AfricaAlgeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Andorra, Armenia, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Oman, Pakistan, Palestine, Philippines, Qatar, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Paddle Blind Flange requirement. We offer Paddle Blank and Spacer, and Spade Spacer which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these ASME B16.48 Paddle Blank at our valuable customers end. Buy Paddle Blank and Spacerat a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us

Exit mobile version