Titanium Grade 2 Flange Supplier

Manufacturer of Titanium Grade 2 Pipe Flange, Titanium Gr-2 Slip On Flange, ASTM B382 Gr. 2 Blind Flanges in India

Titanium Grade 2 Flanges Suppliers in India

Metalfed Engineering is leading supplier and trader of Titanium Alloy Grade 2 Slip On Flanges, which has excellent corrosion resistance properties. It can be laminated with mechanical properties superior to full cure. It is intended to be forged, must be heated to 2100 degrees F/2300 degrees F (1150 degrees C/1260 degrees C) and cannot be forged below 1700 degrees F (925 degrees C). Thanks to the controlled analysis, Titanium WNR 3.7035 Lap Joint Flanges retains sufficient ductility even under difficult conditions. Care must be taken in the forming operations of this steel, which involve deformation of the material warm condition, as cracks and tears may appear. However, when Titanium UNS R50400 Weld Neck Flanges is cold worked, it becomes more magnetic than other standard austenitic alloys. Automotive (mouldings, rims, covers) etc.

Typical applications for this Grade 2 Titanium Threaded Flanges are springs, structural parts, trailer bodies, diaphragms, fasteners etc. High strength combined with excellent corrosion resistance makes it suitable for a wide range of applications in sectors such as aerospace, rail and automotive. Ti-Alloy Gr2 Socket Weld Flanges is in the toughest states to meet the specific mechanical properties required by our customers. The cold hardening range of this steel is improved.

Leading Exporter of ASTM B381 UNS R50400 Pipe Flange, Ti. Gr.2 Weld Neck Flange, Titanium Grade 2 Socket Weld Flange, ASME SB381 Grade 2 Orifice Flange, ASME B16.5 Titanium Grade 2 Threaded Flange, Grade 2 Titanium SORF Flange in all Dimensions and Sizes.

Table of Content

ASTM B381 Grade 2 Flanges Specifications
Titanium Grade 2 Flanges Equivalent Grades
Ti. Gr.2 Flanges Chemical Composition
Titanium Gr-2 Flanges Mechanical Properties
Titanium Grade 2 Flanges Size Range
Grade 2 Titanium Flanges Manufacturing Standards

ASTM B381 UNS R50400 Flanges Dimensions
Titanium Alloy Grade 2 Flanges Weight Chart
Titanium Grade 2 Flange Pressure Ratings
Ti. Grade 2 Flange Types and Prices
Titanium Grade 2 Flanges Applications
Ti. Grade 2 Flanges Exports to

Titanium Grade 2 Pipe Flange is used in screws, nuts and bolts, gears and aircraft accessories, bushings, axles, food production, chemical applications, etc. The addition of sulfur will adversely affect the corrosion resistance of these bars, making them less resistant to mildly corrosive environments.

Value Added Services

Epoxy Coating
Electro Polish
Sand Blasting

Testing

Intergranular Corrosion Test
Tensile Test
Hardness Test

Features

Good load bearing capacity
Excellent versatility and weldability
High tensile strength

Ready Stock of Titanium Exhaust Flange, Titanium Gr 2 Spectacle Blind Flange, Titanium Plate Flange, ASME SB381 Titanium Grade 2 RTJ Flange, WERKSTOFF NR. 3.7035 Lap Joint Flange, Ti. Grade 2 Forged Flange, Titanium Grade 2 Slip-on Flange at Best Price in India.

Titanium Grade 2 Flanges Specifications

Product Name:	Titanium Grade 2 Flanges
Specifications:	ASTM B 381/ ASME SB 381.
size:	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Dimensions:	ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Standard:	ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
Pressure Class:	Class 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS \| PN6, PN10, PN16, PN25, PN40, PN64 etc.
Coating:	Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
common types:	Forged / Screwed / Threaded / Plate
Test Certificates:	Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Flange Face Type:	Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Large Male-Female (LMF), Small Male-Female (SMF), Lap-Joint Face (LJF), Large Tongue & Groove (T&G).
Test Certificates (TC):	Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report, Third Party Inspection Report, etc
Material Test Certificates (MTC):	As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications:	Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network:	Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

ASTM B381 Titanium Grade 2 Flanges Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.
Titanium Gr 2	R50400	3.7035

Titanium Grade 2 Flanges Chemical Composition

Grade	Ti	C	Fe	H	N	O	Al	V
Ti Grade2	99.2 min	0.1 max	0.3 max	0.015 max	0.03 max	0.25 max	–	–

Ti. Grade 2 Flanges Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 2	4.5 g/cm3	1665 °C (3030 °F)	Psi – 49900 , MPa – 344	Psi – 39900 , MPa – 275	20 %

Titanium Gr. 2 Flanges Size Range

Below Mentioned Ti. Grade 2 Flanges Size: 1/8″ – 36″
ASTM B381 Titanium Grade 2 Slip-On Flanges	ASTM B381 Titanium Gr. 2 Threaded Flanges
ASTM B381 Titanium Gr 2 Lap Joint Flanges	ASTM B381 Titanium Grade 2 Plate Flanges
ASTM B381 Titanium Gr. 2 Weld Neck Flanges	ASTM B381 Ti. Gr. 2 Socket Weld Flanges
ASTM B381 Ti. Gr. 2 Blind Flanges	ASTM B381 Titanium Gr. 2 Reducing Flanges
ASTM B381 Titanium Grade 2 Ring Type Joint Flanges	ASTM B381 Titanium Grade 2 Square Flanges
ASTM B381 Titanium Grade 2 Orifice Flanges	ASTM B381 Titanium Grade 2 Forged Flanges

Titanium Grade 2 Pipe Flanges Manufacturing Standards

American Steel Flanges Standard
Standard Name	Standard Code
Forged Flanges	ANSI ASME SB-381
Lap joint flange, Welding neck flange, Slip on flange, Threaded flange, Blind flange, RTJ flange	ANSI ASME B16.5
Blind flange, Welding neck flange	ASME – B 16.47
Welding neck flange, Slip on flange	ASME – B 16.36
German Steel Flanges Standard
BLRF, Steel Blind Flanges	DIN 2527
Flat Flange for Welding (Slip On)	DIN 2573 / 2576
Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)	DIN 2673
Lapped / Loose (Lap Joint) Flanges Plain Collars	DIN 2641 / 2642
Long Neck Welding Flanges	DIN 28115
Titanium Grade 2 PN10 Flanges, DIN PN 10 Flanges, PN16 Flange	DIN PN10, PN16
Titanium Grade 2 PN20 Flanges, DIN PN 25 Flanges	DIN PN20, PN25
Titanium Grade 2 PN40 Flanges, DIN PN 50 Flanges	DIN PN40, PN50
Japanese Steel Flanges Standard
Slip-on Hub (SOH), Slip-on plate flange (SOP), Welding neck flange (WN), Socket Welding flange (SW), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)	JIS B2220
Socket Welding flange (SW), Slip-on plate flange (SOP), Welding neck flange (WN), Slip-on Hub (SOH), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)	JIS B2291
Titanium Grade 2 5K SORF Flanges, 10K SOFF Flanges	JIS 5K, 10K
Titanium Grade 5 16K Blind Flanges, 20K BLRF Flanges	JIS 16K, 20K
Titanium Grade 5 30K Slip on Flanges, 40K Blind Flanges	JIS 30K, 40K
Italian Flanges Standard
Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)	UNI Flanges
British Standard Pipe Flanges Standard
Titanium Grade 2 BS 10 Table D Flanges, Table D Pipe Flange	BS 10 Table D
Titanium Grade 2 BS 10 Table E Flanges, Table E Pipe Flange	BS 10 Table E
Titanium Grade 2 BS 10 Table E Flanges, Table E Flanges	BS 10 Table F
Titanium Grade 2 BS 10 Table E Flanges, Table E Pipe Flanges	BS 10 Table H

Ti. Grade 2 Flanges Dimensions

Titanium Grade 2 Flanges Dimensions

Titanium Grade 2 Flanges are commonly used to connect valves into pipework making it easier for removal and maintenance. There are many common flange standards and flanges within the same standard can etiher be flat or raised face. Below is a reference table for critical flange dimensions.

Standard	Class	Diameter	Bolt Circle Diameter	Number of Bolts	Bolt Size	Diameter of Bolt Hole
15mm (1/2″)
ANSI B16.5	ANSI 150	89	60	4	13	16
	ANSI 300	95	67	4	13	16
	ANSI 600	95	67	4	13	16
	ANSI 900	121	83	4	19	22
	ANSI 1500	121	83	4	19	22
20mm (3/4″)
ANSI B16.5	ANSI 150	98	70	4	13	16
	ANSI 300	117	83	4	16	19
	ANSI 600	117	83	4	16	19
	ANSI 900	130	89	4	19	22
	ANSI 1500	130	89	4	19	22
25mm (1″)
ANSI B16.5	ANSI 150	110	79	4	13	16
	ANSI 300	125	89	4	16	19
	ANSI 600	125	89	4	16	19
	ANSI 900		102	4	22	25
	ANSI 1500		102	4	22	25
32mm (1 1/4″)
ANSI B16.5	ANSI 150	117	89	4	13	16
	ANSI 300	133	98	4	16	19
	ANSI 600	133	98	4	16	19
	ANSI 900	159	111	4	22	25
	ANSI 1500	159	111	4	22	25
40mm (1 1/2″)
ANSI B16.5	ANSI 150	127	98	4	13	16
	ANSI 300	156	114	4	19	22
	ANSI 600	156	114	4	19	22
	ANSI 900	178	124	4	25	29
	ANSI 1500	178	124	4	25	29
50mm (2″)
ANSI B16.5	ANSI 150	152	121	4	16	19
	ANSI 300	165	127	8	16	19
	ANSI 600	165	127	8	16	19
	ANSI 900	216	165	8	22	25
	ANSI 1500	216	165	8	22	25
65mm (2 1/2″)
ANSI B16.5	ANSI 150	178	140	4	16	19
	ANSI 300	191	149	8	19	22
	ANSI 600	191	149	8	19	22
	ANSI 900	244	191	8	22	25
	ANSI 1500	244	191	8	25	29
80mm (3″)
ANSI B16.5	ANSI 150	191	152	4	16	19
	ANSI 300	210	168	8	19	22
	ANSI 600	210	168	8	19	22
	ANSI 900	241	192	8	22	25
	ANSI 1500	267	203	8	29	32
100mm (4″)
ANSI B16.5	ANSI 150	229	191	8	16	19
	ANSI 300	254	200	8	19	22
	ANSI 600	273	216	8	22	25
	ANSI 900	292	235	8	29	32
	ANSI 1500	311	241	8	32	35
125mm (5″)
ANSI B16.5	ANSI 150	254	216	8	19	22
	ANSI 300	279	235	8	19	22
	ANSI 600	330	267	8	25	29
	ANSI 900	349	279	8	32	35
	ANSI 1500	375	292	8	38	41
150mm (6″)
ANSI B16.5	ANSI 150	279	241	8	19	22
	ANSI 300	318	270	12	19	22
	ANSI 600	356	292	12	25	29
	ANSI 900	381	318	12	29	32
	ANSI 1500	394	318	12	35	38
200mm (8″)
ANSI B16.5	ANSI 150	343	298	8	19	22
	ANSI 300	381	330	12	19	22
	ANSI 600	419	349	12	29	32
	ANSI 900	470	394	12	35	38
	ANSI 1500	483	394	12	41	44
250mm (10″)
ANSI B16.5	ANSI 150	406	362	12	22	25
	ANSI 300	445	387	16	25	29
	ANSI 600	508	432	16	32	35
	ANSI 900	546	470	16	35	38
	ANSI 1500	584	483	12	41	51
300mm (12″)
ANSI B16.5	ANSI 150	483	432	12	22	25
	ANSI 300	521	451	16	29	32
	ANSI 600	559	489	20	32	35
	ANSI 900	610	533	20	35	38
	ANSI 1500	673	571	16	51	54
350mm (14″)
ANSI B16.5	ANSI 150	533	476	12	25	29
	ANSI 300	584	514	20	29	32
	ANSI 600	603	527	20	38	41
	ANSI 900	641	559	20	38	41
	ANSI 1500	749	635	16	57	60
400mm (16″)
ANSI B16.5	ANSI 150	597	540	16	25	29
	ANSI 300	648	572	20	32	35
	ANSI 600	686	603	20	38	41
	ANSI 900	705	616	20	41	44
	ANSI 1500	826	705	16	64	67
450mm (18″)
ANSI B16.5	ANSI 150 Flange	635	578	16	29	32
	ANSI 300 Flange	711	629	24	32	35
	ANSI 600 Flange	743	654	20	41	44
	ANSI 900 Flange	787	686	20	48	51
	ANSI 1500 Flange	914	775	16	70	73
500mm (20″)
ANSI B16.5	ANSI 150 Flange	699	635	20	29	32
	ANSI 300 Flange	775	686	24	32	35
	ANSI 600 Flange	813	724	24	41	44
	ANSI 900 Flange	857	749	20	51	54
	ANSI 1500 Flange	984	832	16	76	79
600mm (24″)
ANSI B16.5	ANSI 150 Flanges	813	749	20	32	35
	ANSI 300 Flanges	914	813	24	38	41
	ANSI 600 Flanges	940	838	24	48	51
	ANSI 900 Flanges	1041	902	20	64	67
	ANSI 1500 Flanges	1168	991	16	89	92

Weight Chart of Ti. Grade 2 Flanges

Pipe Normal Diam.		O.D. Flange	Thk. Of Flange Min	Diam. of Hub	Diameter of Raised Face	Length Hub.Y	Thread Length	Diam. of Bolt Circle	Diam. of Bolt Holes	Number of Bolts	Diam. of Bolts (inch)	KG	LB
inch	dn	O	C	X	G	Y	T	BC	BH	BN	BD
1/2"	15	89.00	11.20	30.20	35.10	15.70	15.70	60.50	15.80	4	1/2"	0.4	0.9
3/4"	20	98.50	12.70	38.10	42.90	15.70	15.70	69.90	15.80	4	1/2"	0.7	1.5
1"	25	108.00	14.20	49.30	50.80	17.50	17.50	79.30	15.80	4	1/2"	0.8	1.8
1-1/4"	32	117.50	15.70	58.70	63.50	20.60	20.60	88.90	15.80	4	1/2"	1.2	2.6
1-1/2"	40	127.00	17.50	65.00	73.20	22.40	22.40	98.60	15.80	4	1/2"	1.5	3.3
2"	50	152.50	19.10	77.70	91.90	25.40	25.40	120.70	19.10	4	5/8"	2.3	5.1
2-1/2"	65	178.00	22.40	90.40	104.60	28.40	28.40	139.70	19.10	4	5/8"	3.7	8.1
3"	80	190.50	23.90	108.00	127.00	30.20	30.20	152.40	19.10	4	5/8"	4.1	9
3-1/2"	90	216.00	23.90	122.20	139.70	31.80	31.80	177.80	19.10	8	5/8"	5.1	11.2
4"	100	228.50	23.90	134.90	157.20	33.30	33.30	190.50	19.10	8	5/8"	5.9	13
5"	125	254.00	23.90	163.60	185.70	36.60	36.60	215.90	22.40	8	3/4"	7	15.4
6"	150	279.50	25.40	192.00	215.90	39.60	39.60	241.30	22.40	8	3/4"	8.4	18.5
8"	200	343.00	28.40	246.10	269.70	44.50	44.50	298.50	22.40	8	3/4"	13	28.6
10"	250	406.50	30.20	304.80	323.90	49.30	49.30	362.00	25.40	12	7/8"	18	39.5
12"	300	482.50	31.80	365.30	381.00	55.60	55.60	431.80	25.40	12	7/8"	29	64
14"	350	533.50	35.10	400.10	412.80	57.20	57.20	476.30	28.50	12	1"	39	86
16"	400	597.00	36.60	457.20	469.90	63.50	63.50	539.80	28.50	16	1"	47	103
18"	450	635.00	39.60	505.00	533.40	68.30	68.30	577.90	31.80	16	1 1/8"	57	126
20"	500	698.50	42.90	558.80	584.20	73.20	73.20	635.00	31.80	20	1 1/8"	76	167
24"	600	813.00	47.80	663.40	692.20	82.60	82.60	749.30	35.10	20	1 1/4"	97	214

Schedule Class of ASTM B381 Titanium Grade 2 Flanges

Pipe Size – Pipe Flanges	Flange Schedule/Class	Flange Material	Flange Connection Type	Max. Pressure
1/2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	FNPT	150 psi
1/2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
1/2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Welded	150 psi
3/4"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	FNPT	150 psi
3/4"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
1-1/4"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
1-1/2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	FNPT	150 psi
2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
2-1/2"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
3"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
4"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	FNPT	150 psi
4"	ASME B16.5 Class 150	Titanium Grade 2 Flanges	Socket Weld	275 psi
1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1-1/4"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	FNPT	720 psi
1-1/4"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1-1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
1-1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
2-1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
2-1/2"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
3"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
3"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
4"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi
4"	ASME B16.5 Class 300	Titanium Grade 2 Flanges	Slip On	720 psi

Titanium Gr. 2 Flanges Pressure Rating

ANSI/ASME B16.34	PRESSURE RATING CHART
Temperature °F	150#	300#	400#	600#	900#	1500#	2500#
-20 to 100	275	720	960	1440	2160	3600	6000
200	230	600	800	1200	1800	3000	5000
300	205	540	720	1080	1620	2700	4500
400	190	495	660	995	1490	2485	4140
500	170	465	620	930	1395	2330	3880
600	140	435	580	875	1310	2185	3640
650	125	430	575	860	1290	2150	3580
700	110	425	565	850	1275	2125	3540
750	95	415	555	830	1245	2075	3460
800	80	405	540	805	1210	2015	3360
850	65	395	530	790	1190	1980	3300
900	50	390	520	780	1165	1945	3240
950	35	380	510	765	1145	1910	3180
1000	20	320	430	640	965	1605	2675
1050	20	310	410	615	925	1545	2570
1100	20	255	345	515	770	1285	2145
1150	20	200	265	400	595	995	1655
1200	20	155	205	310	465	770	1285
1250	20	115	150	225	340	565	945
1300	20	85	115	170	255	430	715
1350	20	60	80	125	185	310	515
1400	20	50	65	95	145	240	400
1450	15	35	45	70	105	170	285
1500	10	25	35	55	80	135	230

Titanium Grade 2 Flanges Types and Prices

Slip-on Flanges

Titanium Grade 2 Slip-on Flanges
Price: $10-$60 / Kilogram

Weld Neck Flanges

Titanium Grade 2 Weld Neck Flanges
Price: US$1.98

Blind Flanges

Titanium Grade 2 Blind Flanges
Price: US$10.23

Socket Weld Flanges

Titanium Grade 2 Socket Weld Flanges
Price: US$10-30

Orifice Flanges

Titanium Grade 2 Orifice Flanges (Weld Neck /Slip On/ Threaded Flanges)
Price: US$20-50

Threaded Flanges

Titanium Grade 2 Threaded Flanges
Price: US$5.98

Lap Joint Flanges

Titanium Grade 2 Lap Joint Flanges
Price: US$0.30

Spectacle Blind Flanges

Titanium Grade 2 Spectacle Blind Flanges
Price: US$1.98

Ring Type Joint Flanges

Titanium Grade 2 Ring Type Joint Flanges
Price: US$20

Forged Flanges

Titanium Grade 2 Forged Flanges
Price: US$10-20

Titanium Grade 2 Flat Face Flanges — Flat Face Flange

Titanium Grade 2 Flat Face Flange
Price: US$2.00

Titanium Grade 2 Tongue and Groove Flanges — Tongue and Groove Flanges

Titanium Grade 2 (T & G) Flanges
Price: US$30

Plate Flanges

Titanium Grade 2 Plate Flanges
Price: US$10-50

Titanium Grade 2 API Type 6BX Flanges — API Type 6BX Flanges

Titanium Grade 2 API Type 6BX (Weld Neck / Threaded) Flanges
Price: US$20-30

BS 10 Flanges

Titanium Grade 2 BS 10 Flanges
Price: US$10-40

Titanium Grade 2 API Type 6B Flanges — API Type 6B Flanges

Titanium Grade 2 API Type 6B (Weld Neck/ Threaded) Flanges
Price: US$10-40

Titanium Grade 2 Paddle Blank Spacer — Paddle Blank and Spacer

Titanium Grade 2 Paddle Blank and Spacer (RTJ Male Paddle Blank and Spacer)
Price: US$2.00

Titanium Grade 2 Compact Flanges — Compact Flanges

Titanium Grade 2 Compact Flange (Swivel / Blind)
Price: US$1.98

Titanium Grade 2 Series A Flanges — Series A / B Weldneck Flange

Titanium Grade 2 Series A / B Weldneck Flange
Price: US$1.98

Titanium Grade 2 Series B Flanges Standard — Series A/ B Blind Flange

Titanium Grade 2 Series A / B Blind Flange
Price: US$1.10

Threaded Reducing Flange

Titanium Grade 2 Threaded Reducing Flange
Price: US$0.20

Titanium Grade 2 Figure 8 Flanges — Figure 8 Flange (RTJ Male)

Titanium Grade 2 Figure 8 Flange (RTJ Male)
Price: US$3.00

Male and Female Flange

Titanium Grade 2 Male and Female Flange
Price: US$2.00

Flangeolet

Titanium Grade 2 Flangeolet
Price: US$10-50

Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

ASTM B381 Ti. Grade 2 Flanges – Applications & Industries

Oil & Gas Industries

Gas Processing Industries

Food Processing Industries

Petrochemical Industries

Chemical Industries

Power Generation Industries

Sugar Industries

Fertilizers Industries

We are one of the oldest Manufacturers, Exporters, and Suppliers of high quality Titanium Grade 2 Slip On Flanges. We supply ANSI B16.5 Ti. Grade 2 Weld Neck Flanges to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of ASTM B381 Titanium Grade 2 Flanges Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Titanium Grade 2 Flanges requirement. We offer Ti. Grade 2 SORF Flanges, and Ti. Grade 2 Blind Flanges which are accurately designed to provide satisfaction to our customers. We have ready stock of Ti. Grade 2 Socket Weld Flange, Titanium Grade 2 Orifice Flange, Ti. Grade 2 Lap Joint Flange, Ti. Grade 2 Spectacle Blind Flange, Titanium Grade 2 RTJ Flange at our valuable customers end. Buy Titanium Grade 2 Flangeat a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us