sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeASME B16.11 Forged Fittings Inconel Forged Fittings SupplierInconel 718 Forged Fittings Supplier

Inconel 718 Forged Fittings Supplier

Inconel Alloy 718 Socket weld Fittings, Alloy 718 Threaded Fittings, Nickel Alloy 718 High Pressure Forged Fittings Manufacturer in India.

Inconel 718 Forged Fittings Suppliers in India

If a lower cost, but relatively strong part is required, this Inconel 718 Forged Fitting is probably the way to go. The formation of gamma-prime crystals increases over time, especially after three hours of heat exposure of 850 Degree C (1,560 Degree F), and continues to grow after 72 hours of exposure. Alloy 718 Forged Threaded Union Tee Fittings is a popular material for valve springs due to its high fatigue properties and resistance against frequent loads. Fuel nozzles, afterburner ornaments, and other engine mechanisms are commonly made out of Inconel. And so heat treatment of such alloys is necessary to increase material toughness. Inconel Alloy 718 Forged Threaded Union Elbow Fittings exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.
Metalfed Engineering is a distinguished stockist of Inconel 718 Threaded Fittings, which is another metal consisting of a nickel-copper alloy and can be used in extreme conditions with high heat. The main uses of ASTM B564 UNS N07718 Socket Weld Fittings include a gas turbine engine ducting and combustion liners. It is a nickel-chromium alloy that has additions of aluminum, where these additions increase its resistance to oxidation and various forms of corrosion.

Exporter of Inconel® Alloy 718 Threaded Tee, ASTM B564 UNS N07718 Socketweld Coupling, Incoloy 718 Forged Cross, Inconel 718 Forged Fittings Elbow, Alloy 2.4668 Threaded Pipe Cap, Inconel 718 Industrial Forged Fittings.

Table of Content

This nickel-based Inconel Alloy WNR 2.4668 Forged Threaded Fittings is made from nickel and chromium, alongside significant amounts of molybdenum, niobium, and iron. Because of its ease of construction, it is made into a variety of mechanisms for plant equipment.We are also stockholder of Inconel 600 Forged Fittings, Inconel 625 Forged Fittings and Incoloy 825 Forged Fittings. Contact us to get Inconel 718 Forged Fittings Price.

Value Added Services

  • Epoxy Coating
  • Electro Polish
  • Sand Blasting
Testing

  • Intergranular Corrosion Test
  • Tensile Test
  • Hardness Test
Features

  • Good load bearing capacity
  • Excellent versatility and weldability
  • High tensile strength

Largest Stockist of ASME 16.11 Inconel Alloy 718 Socket weld Fittings, Inconel 718 Threaded Elbow, Incoloy Alloy 718 Forged Tee, Cross, ASME SB564 Inconel 718 Socket weld Coupling, 718 Inconel Forged End Cap, Inconel Alloy 718 Forged Union in all Dimensionat best price.

Inconel Alloy 718 Forged Fittings Specifications
Product Name: Inconel 718 Forged Fittings
Specifications: ASTM / ASME B564
Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Pressure Class: Threaded End- 2000LBS/ 3000LBS/ 6000LBS
Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS
Thread: BSPT, NPT, BSPP
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Manufacturers of: 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow.
Uses & Applications: Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders.
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

Inconel 718 Forged Fittings Equivalent Grades
STANDARD WERKSTOFF NR. UNS
Inconel 718 2.4668 N07718

Alloy 718 Forged Fittings Chemical Composition
Grade C Mn Si P S Ni Cr B Mo Co Al Ti Nb Cu
Inconel 718 0.08 max 0.35 max 0.35 max 0.015 max 0.015 max 50 – 55 17 – 21 0.006 max 2.8 – 3.3 1.0 max 0.2 – 0.8 0.65 – 1.15 4.75 – 5.5 0.3 max

ASTM B564 UNS N07718 Inconel Forged Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 718 8.2  g/cm3 1350 °C (2460 °F) Psi – 1,35,000, MPa – 930 Psi – 75,000, MPa – 482 45 %

Inconel Alloy 718 Forged Fittings Size Range
Below Mentioned Forged Fittings Size: 1/8″– 4″
Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
ASTM B564 Inconel Alloy 718 90° Elbow ASTM B564 Inconel Alloy 718 Forged Tee
ASTM B564 Inconel Alloy 718 Forged Cross ASTM B564 Inconel Alloy 718 Street Elbow
ASTM B564 Inconel Alloy 718 Screwed Bushing ASTM B564 Inconel Alloy 718 Socket weld Cap
ASTM B564 Inconel Alloy 718 Forged Plug ASTM B564 Inconel Alloy 718 45° Elbow
ASTM B564 Inconel Alloy 718 Union ASTM B564 Inconel Alloy 718 Insert
ASTM B564 Inconel Alloy 718 Threaded Pipe Nipple ASTM B564 Inconel Alloy 718 Screwed Coupling

ASTM B564 Inconel 718 Forged Fittings Manufacturing Standards
American Steel Forged Fittings Standard
Standard Name Standard Code
Forged fittings ANSI ASME SB-564
Socket-welding and Threaded forged fittings ANSI ASME B16.11
Socket-welding reducing Inserts MSS SP-79
Class 3000 steel socket-welding and threaded unions MSS SP-83
Swaged nipples and round plugs MSS SP-95
SW,TH and BW ends for integrally reinforced forged branch outlet MSS SP-97

Inconel 718 Forged Fittings Dimensions

ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches

Nominal Pipe Size Centre to End Elbows, Tee, Crosses A Centre to End 45º Elbows C Outside Diameter of Band H Minimum Wall Thickness G Lengths of Thread Min
2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# 2000# 3000# 6000# B L2
1/8 13/16 13/16 31/32 11/16 11/16 3/4 7/8 7/8 1 .125 .125 .250 .25 .2639
1/4 13/16 31/32 1-1/8 11/16 3/4 7/8 7/8 1 1-5/16 .125 .130 .260 .32 .4018
3/8 3/32 1-1/8 1-5/16 3/4 7/8 1 1 1-5/16 1-1/2 .125 .138 .275 .36 .4078
1/2 1-1/8 1-5/16 1-1/2 7/8 1 1-1/8 1-5/16 1-1/2 1-13/16 .125 .161 .321 .43 .5337
3/4 1-5/16 1-1/2 1-3/4 1 1-1/8 1-5/16 1-1/2 1-13/16 2-3/16 .123 .168 .336 .50 .5457
1 1-1/2 1-3/4 2 1-1/8 1-5/16 1-3/8 1-13/16 2-3/16 2-7/16 .145 .196 .391 .58 .6828
1-1/4 1-3/4 2 2-3/8 1-15/16 1-3/8 1-11/16 2-3/16 2-7/16 2-31/32 .153 .208 .417 .67 .7068
1-1/2 2 2-3/8 2-1/2 1-3/8 1-11/16 1-23/32 2-7/16 2-31/32 3-5/16 .158 .218 .436 .70 .7235
2 2-3/8 2-1/2 3-3/4 1-11/16 1-23/32 2-1/16 2-31/32 3-5/16 4 .168 .238 .476 .75 .7565
2-1/2 3 3-1/4 3-3/4 2-1/16 2-1/16 2-1/2 3-5/8 4 4 .221 .301 .602 .932 1.138
3 3-3/8 3-3/4 4-3/16 2-1/2 2-1/2 3-1/8 4-5/16 4-3/4 4-3/4 .236 .327 .655 1.016 1.200
4 3-3/16 4-1/2 4-1/2 3-1/8 3-1/8 3-1/8 5-3/4 5 6 .258 .368 .735 1.094 1.300

ASME B16.11 Inconel Alloy 718 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B2. 1).

Nominal Pipe Size End to End Couplings W End to
End Caps H		 Outside
Diameter D		 End Wall Thickness
G Min		 Length of
Thead Min
3000# &
6000#		 3000# 6000# 3000# 6000# 3000# 6000# B L2
1/8 1-1/4 3/4 5/8 7/8 3/16 .25 .2639
1/4 1-3/8 1 1-1/16 3/4 1 3/16 1/4 .32 .4018
3/8 1-1/2 1 1-1/16 7/8 1-1/4 3/16 1/4 .36 .4078
1/2 1-7/8 1-1/4 1-5/16 1-1/8 1-1/2 1/4 5/16 .43 .5337
3/4 2 1-7/16 1-1/2 1-3/8 1-3/4 1/4 5/16 .50 .5457
1 2-3/8 1-5/8 1-11/16 1-3/4 2-1/4 3/8 7/16 .58 .6828
1-1/4 2-5/8 1-3/4 1-13/16 2-1/4 2-1/2 3/8 7/16 .67 .7068
1-1/2 3-1/8 1-3/4 1-7/8 2-1/2 3 7/16 1/2 .70 .7235
2 3-3/8 1-7/8 2 3 3-5/8 1/2 5/8 .75 .7565
2-1/2 3-5/8 2-3/8 2-1/2 3-5/8 4-1/4 5/8 3/4 .932 1.138
3 4-1/4 2-9/16 2-11/16 4-1/4 5 3/4 7/8 1.016 1.200
4 4-3/4 2-11/16 2-15/16 5-1/2 6-1/4 7/8 1-1/8 1.094 1.300

ASME B16.11 Inconel Alloy 718 Threaded Fittings Plugs, Bushings. All dimensions are in inches.

Nominal Pipe Size Thead

Length (min)
A

 Plugs Square Head Plugs Round Head Hexagon Plugs
& Bushings
Height of Square (min)
B		 Width Flats (min)
C		 Nominal Diameter of Head

E

 Length (min)
D		 Width Flats (min)
F		 Hexagon Height min
Bushings G Plug
H
1/8 3/8 1/4 9/32 13/32 1-3/8 7/16 – 1/4
1/4 7/16 1/4 3/8 17/32 1-5/8 5/8 1/8 1/4
3/8 1/2 5/16 7/16 11/16 1-5/8 11/16 5/32 5/16
1/2 9/16 3/8 9/16 27/32 1-3/4 7/8 3/16 5/16
3/4 5/8 7/16 5/8 1-1/16 1-3/4 1-1/16 7/32 3/8
1 3/4 1/2 13/16 1-5/16 2 1-3/8 1/4 3/8
1-1/4 13/16 9/16 15/16 1-11/16 2 1-3/4 9/32 9/16
1-1/2 13/16 5/8 1-1/8 1-29/32 2 2 5/16 5/8
2 7/8 11/16 1-5/16 2-3/8 2-1/2 2-1/2 11/32 11/16
2-1/2 1-1/16 3/4 1-1/2 2-7/8 2-3/4 3 3/8 3/4
3 1-1/8 13/16 1-11/16 3-1/2 2-3/4 3-1/2 13/32 13/16
3-1/2 1-3/16 7/8 1-7/8 4 3 4-1/8 7/16 7/8
4 1-1/4 1-1/4 2-1/2 4-1/2 3 4-5/8 1/2 1-1/4

Inconel Alloy 718 Forged Fittings Weight Chart -Pounds per 100 pcs
Name WorkingPress. 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” # per 100 pcs
90º Ells S/W 3000# 22 29 53 86 139 198 286 400
90º Ells
Screw		 3000# 29 53 86 139 198 286 400 1452
45º Ells S/W 3000# 22 38 53 86 139 198 374 396
45º Ells Screw 3000# 29 53 86 139 198 374 718 800
Tees S/W 3000# 31 40 73 106 158 220 317 572
Tees Screw 3000# 40 73 106 158 220 317 512 2090
Union Screw
Union S/W
Coupling S/W 3000# 9 18 26 40 92 152 229 462
Coupling Screw 3000# 9 18 26 40 92 152 229 462
Caps S/W 3000# 11 13 24 37 62 114 147 297
Caps Screw 3000# 11 13 24 37 62 114 147 297
Hex.
Head Plugs		 3000# 4 7 18 26 48 86 99 198
Sq.
Head Plugs		 3000# 2 4 9 18 33 57 73 136
Hex. Bushing 3000# 7 7 9 13 18 42 44 136
Flush
Bushing		 3000# 4 4 7 9 15 33 37 132

Inconel 718 Forged Fittings Types and Standards
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

Inconel Alloy 718 Threaded and Socket Weld Fittings – Applications & Industries

We are leading Manufacturers, Exporters, and Suppliers of high quality Inconel 718 High Pressure Forged Fittings. We supply ANSI 16.11 Alloy 718 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of Nickel Alloy 718 Forged Fittings Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Inconel Alloy 718 Forged Threaded Fittings requirement. We are offering Inconel 718 Socket weld Elbow, and Alloy 718 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these  Inconel 718 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Inconel Alloy 718 Forged Fittings at a cheap price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us