Manufacturer of Alloy 201 Threaded Fittings, Nickel Alloy 201 Socket weld Fittings, 201 Nickel Alloy High Pressure Forged Fittings in India.
Nickel 201 Forged Fittings is meant to control carbon which keeps it from being embrittled by intergranular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes. At higher temperatures, it should be utilized. In the lower carbon chemistry, Ni-201 Forged Threaded Half Coupling Fittings is preferred for service in temperatures above 600 Degree F (315 Degree C). Nickel WNR 2.4068 Forged Threaded Full Coupling Fittings is suitable for forming by deep drawing and spinning into combustion boats and the continuous stamping of strip into electronic components. They are characterized by ferromagnetism, along with high electrical and thermal conductivity. Nickel 201 Forged Threaded Reducing Coupling Fittings is made with above 99% of nickel, which makes it one of the toughest grades of metal which, has excellent formability and fabrication applications.
We as a Metalfed Engineering is an eminent distributor of Nickel Alloy 201 Forged Threaded Fittings, which exhibits excellent mechanical properties and high thermal and electrical conductivity. Its reinforcement effect with the increase of tissue imbalance and tend to be more obvious, and the strength of the alloy steel annealing state than carbon steel has a lot of advantages. Nickel UNS N02201 Forged Threaded Coupling Fittings also has exceptional resistance to caustic alkalis at different concentrations and temperatures.
Largest Stockist of Nickel® Alloy 201 Threaded Tee, Nickel 201 Forged Cross, UNS N02201 Forged Fittings Elbow, ASTM B564 201 Socketweld Coupling, ASME 16.11 Nickel Alloy 201 Threaded Pipe Cap, NA 12 Nickel Industrial Forged Fittingat lowest Price in India.
Nickel Alloy 201 Socket weld Fitting is extremely resistant to a number of reducing chemicals and also is unexcelled in conflict to corroding alkalies. When functioning temperatures are likely to surpass 600 Degree F, then the carbon content turn out to be critical.
- Epoxy Coating
- Electro Polish
- Sand Blasting
- Intergranular Corrosion Test
- Tensile Test
- Hardness Test
- Good load bearing capacity
- Excellent versatility and weldability
- High tensile strength
Exporter of Alloy 2.4068 Socket weld Fittings, Nickel 201 Threaded Elbow, Grade 201 Alloy Forged Tee, Cross, ASME SB564 201 Socket weld Coupling, 201 Nickel Forged End Cap, Nickel Alloy 201 Forged Union in all Dimensions.
Nickel Alloy 201 Forged Fittings Specifications
| Product Name: | Nickel 201 Forged Fittings |
| Specifications: | ASTM / ASME B564 |
| Size: | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Dimensions: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Class: | Threaded End- 2000LBS/ 3000LBS/ 6000LBS Socket-weld End- 3000LBS/ 6000LBS/ 9000LBS |
| Thread: | BSPT, NPT, BSPP |
| Test Certificates: | Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc. |
| Material Test Certificates (MTC): | As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175 |
| Manufacturers of: | 90º Elbows, 45º Elbows, Equal Tee, Reducing Tee, Lateral Tee, Cross, Reducers, Half Coupling, Full Coupling, End Cap, Union, Reducer Insert, Boss, Nipple, Adapters, Street Elbow, Reducing Coupling, Bushing, Hex Plug, Square Head Plug, Round Head Plug, Bull Plug, Branch Outlet, 90° Outlet Elbow. |
| Uses & Applications: | Petrochemicals and acids, Nuclear Power, Heavy oil refineries, Bitumen upgraders. |
| Export Network: | Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc |
Nickel 201 Forged Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
Alloy 201 Forged Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
ASTM B564 201 Nickel Forged Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Nickel Alloy 201 Forged Fittings Size Range
| Below Mentioned Forged Fittings Size: 1/8″– 4″ Pressure Ratings – 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
|
| ASTM B564 Nickel Alloy 201 90° Elbow | ASTM B564 Nickel Alloy 201 Forged Tee |
| ASTM B564 Nickel Alloy 201 Forged Cross | ASTM B564 Nickel Alloy 201 Street Elbow |
| ASTM B564 Nickel Alloy 201 Screwed Bushing | ASTM B564 Nickel Alloy 201 Socket weld Cap |
| ASTM B564 Nickel Alloy 201 Forged Plug | ASTM B564 Nickel Alloy 201 45° Elbow |
| ASTM B564 Nickel Alloy 201 Union | ASTM B564 Nickel Alloy 201 Insert |
| ASTM B564 Nickel Alloy 201 Threaded Pipe Nipple | ASTM B564 Nickel Alloy 201 Screwed Coupling |
ASTM B564 Nickel 201 Forged Fittings Manufacturing Standards
| American Steel Forged Fittings Standard | |
| Standard Name | Standard Code |
| Forged fittings | ANSI ASME SB-564 |
| Socket-welding and Threaded forged fittings | ANSI ASME B16.11 |
| Socket-welding reducing Inserts | MSS SP-79 |
| Class 3000 steel socket-welding and threaded unions | MSS SP-83 |
| Swaged nipples and round plugs | MSS SP-95 |
| SW,TH and BW ends for integrally reinforced forged branch outlet | MSS SP-97 |
Nickel 201 Forged Fittings Dimensions
ASME B16.11 Threaded Fittings 90º Elbow, 45º Elbow, Cross, Tee. All dimensions are in inches
| Nominal Pipe Size | Centre to End Elbows, Tee, Crosses A | Centre to End 45º Elbows C | Outside Diameter of Band H | Minimum Wall Thickness G | Lengths of Thread Min | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | 2000# | 3000# | 6000# | B | L2 | |
| 1/8 | 13/16 | 13/16 | 31/32 | 11/16 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | .125 | .125 | .250 | .25 | .2639 |
| 1/4 | 13/16 | 31/32 | 1-1/8 | 11/16 | 3/4 | 7/8 | 7/8 | 1 | 1-5/16 | .125 | .130 | .260 | .32 | .4018 |
| 3/8 | 3/32 | 1-1/8 | 1-5/16 | 3/4 | 7/8 | 1 | 1 | 1-5/16 | 1-1/2 | .125 | .138 | .275 | .36 | .4078 |
| 1/2 | 1-1/8 | 1-5/16 | 1-1/2 | 7/8 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | .125 | .161 | .321 | .43 | .5337 |
| 3/4 | 1-5/16 | 1-1/2 | 1-3/4 | 1 | 1-1/8 | 1-5/16 | 1-1/2 | 1-13/16 | 2-3/16 | .123 | .168 | .336 | .50 | .5457 |
| 1 | 1-1/2 | 1-3/4 | 2 | 1-1/8 | 1-5/16 | 1-3/8 | 1-13/16 | 2-3/16 | 2-7/16 | .145 | .196 | .391 | .58 | .6828 |
| 1-1/4 | 1-3/4 | 2 | 2-3/8 | 1-15/16 | 1-3/8 | 1-11/16 | 2-3/16 | 2-7/16 | 2-31/32 | .153 | .208 | .417 | .67 | .7068 |
| 1-1/2 | 2 | 2-3/8 | 2-1/2 | 1-3/8 | 1-11/16 | 1-23/32 | 2-7/16 | 2-31/32 | 3-5/16 | .158 | .218 | .436 | .70 | .7235 |
| 2 | 2-3/8 | 2-1/2 | 3-3/4 | 1-11/16 | 1-23/32 | 2-1/16 | 2-31/32 | 3-5/16 | 4 | .168 | .238 | .476 | .75 | .7565 |
| 2-1/2 | 3 | 3-1/4 | 3-3/4 | 2-1/16 | 2-1/16 | 2-1/2 | 3-5/8 | 4 | 4 | .221 | .301 | .602 | .932 | 1.138 |
| 3 | 3-3/8 | 3-3/4 | 4-3/16 | 2-1/2 | 2-1/2 | 3-1/8 | 4-5/16 | 4-3/4 | 4-3/4 | .236 | .327 | .655 | 1.016 | 1.200 |
| 4 | 3-3/16 | 4-1/2 | 4-1/2 | 3-1/8 | 3-1/8 | 3-1/8 | 5-3/4 | 5 | 6 | .258 | .368 | .735 | 1.094 | 1.300 |
ASME B16.11 Nickel Alloy 201 Threaded Fitting Coupling, Half Coupling, Cap. All dimensions are in inches. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American Standard for Pipe Threads (ASA B2. 1).
| Nominal Pipe Size | End to End Couplings W | End to End Caps H |
Outside Diameter D |
End Wall Thickness G Min |
Length of Thead Min |
||||
|---|---|---|---|---|---|---|---|---|---|
| 3000# & 6000# |
3000# | 6000# | 3000# | 6000# | 3000# | 6000# | B | L2 | |
| 1/8 | 1-1/4 | 3/4 | 5/8 | 7/8 | 3/16 | .25 | .2639 | ||
| 1/4 | 1-3/8 | 1 | 1-1/16 | 3/4 | 1 | 3/16 | 1/4 | .32 | .4018 |
| 3/8 | 1-1/2 | 1 | 1-1/16 | 7/8 | 1-1/4 | 3/16 | 1/4 | .36 | .4078 |
| 1/2 | 1-7/8 | 1-1/4 | 1-5/16 | 1-1/8 | 1-1/2 | 1/4 | 5/16 | .43 | .5337 |
| 3/4 | 2 | 1-7/16 | 1-1/2 | 1-3/8 | 1-3/4 | 1/4 | 5/16 | .50 | .5457 |
| 1 | 2-3/8 | 1-5/8 | 1-11/16 | 1-3/4 | 2-1/4 | 3/8 | 7/16 | .58 | .6828 |
| 1-1/4 | 2-5/8 | 1-3/4 | 1-13/16 | 2-1/4 | 2-1/2 | 3/8 | 7/16 | .67 | .7068 |
| 1-1/2 | 3-1/8 | 1-3/4 | 1-7/8 | 2-1/2 | 3 | 7/16 | 1/2 | .70 | .7235 |
| 2 | 3-3/8 | 1-7/8 | 2 | 3 | 3-5/8 | 1/2 | 5/8 | .75 | .7565 |
| 2-1/2 | 3-5/8 | 2-3/8 | 2-1/2 | 3-5/8 | 4-1/4 | 5/8 | 3/4 | .932 | 1.138 |
| 3 | 4-1/4 | 2-9/16 | 2-11/16 | 4-1/4 | 5 | 3/4 | 7/8 | 1.016 | 1.200 |
| 4 | 4-3/4 | 2-11/16 | 2-15/16 | 5-1/2 | 6-1/4 | 7/8 | 1-1/8 | 1.094 | 1.300 |
ASME B16.11 Nickel Alloy 201 Threaded Fittings Plugs, Bushings. All dimensions are in inches.
| Nominal Pipe Size | Thead
Length (min) |
Plugs Square Head | Plugs Round Head | Hexagon Plugs & Bushings |
||||
|---|---|---|---|---|---|---|---|---|
| Height of Square (min) B |
Width Flats (min) C |
Nominal Diameter of Head
E |
Length (min) D |
Width Flats (min) F |
Hexagon Height min | |||
| Bushings G | Plug H |
|||||||
| 1/8 | 3/8 | 1/4 | 9/32 | 13/32 | 1-3/8 | 7/16 | – | 1/4 |
| 1/4 | 7/16 | 1/4 | 3/8 | 17/32 | 1-5/8 | 5/8 | 1/8 | 1/4 |
| 3/8 | 1/2 | 5/16 | 7/16 | 11/16 | 1-5/8 | 11/16 | 5/32 | 5/16 |
| 1/2 | 9/16 | 3/8 | 9/16 | 27/32 | 1-3/4 | 7/8 | 3/16 | 5/16 |
| 3/4 | 5/8 | 7/16 | 5/8 | 1-1/16 | 1-3/4 | 1-1/16 | 7/32 | 3/8 |
| 1 | 3/4 | 1/2 | 13/16 | 1-5/16 | 2 | 1-3/8 | 1/4 | 3/8 |
| 1-1/4 | 13/16 | 9/16 | 15/16 | 1-11/16 | 2 | 1-3/4 | 9/32 | 9/16 |
| 1-1/2 | 13/16 | 5/8 | 1-1/8 | 1-29/32 | 2 | 2 | 5/16 | 5/8 |
| 2 | 7/8 | 11/16 | 1-5/16 | 2-3/8 | 2-1/2 | 2-1/2 | 11/32 | 11/16 |
| 2-1/2 | 1-1/16 | 3/4 | 1-1/2 | 2-7/8 | 2-3/4 | 3 | 3/8 | 3/4 |
| 3 | 1-1/8 | 13/16 | 1-11/16 | 3-1/2 | 2-3/4 | 3-1/2 | 13/32 | 13/16 |
| 3-1/2 | 1-3/16 | 7/8 | 1-7/8 | 4 | 3 | 4-1/8 | 7/16 | 7/8 |
| 4 | 1-1/4 | 1-1/4 | 2-1/2 | 4-1/2 | 3 | 4-5/8 | 1/2 | 1-1/4 |
Nickel Alloy 201 Forged Fittings Weight Chart -Pounds per 100 pcs
| Name | WorkingPress. | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1-1/4” | 1-1/2” | 2” | # per 100 pcs |
|---|---|---|---|---|---|---|---|---|---|---|
| 90º Ells S/W | 3000# | 22 | 29 | 53 | 86 | 139 | 198 | 286 | 400 | |
| 90º Ells Screw |
3000# | 29 | 53 | 86 | 139 | 198 | 286 | 400 | 1452 | |
| 45º Ells S/W | 3000# | 22 | 38 | 53 | 86 | 139 | 198 | 374 | 396 | |
| 45º Ells Screw | 3000# | 29 | 53 | 86 | 139 | 198 | 374 | 600 | 800 | |
| Tees S/W | 3000# | 31 | 40 | 73 | 106 | 158 | 220 | 317 | 572 | |
| Tees Screw | 3000# | 40 | 73 | 106 | 158 | 220 | 317 | 512 | 2090 | |
| Union Screw | ||||||||||
| Union S/W | ||||||||||
| Coupling S/W | 3000# | 9 | 18 | 26 | 40 | 92 | 152 | 229 | 462 | |
| Coupling Screw | 3000# | 9 | 18 | 26 | 40 | 92 | 152 | 229 | 462 | |
| Caps S/W | 3000# | 11 | 13 | 24 | 37 | 62 | 114 | 147 | 297 | |
| Caps Screw | 3000# | 11 | 13 | 24 | 37 | 62 | 114 | 147 | 297 | |
| Hex. Head Plugs |
3000# | 4 | 7 | 18 | 26 | 48 | 86 | 99 | 198 | |
| Sq. Head Plugs |
3000# | 2 | 4 | 9 | 18 | 33 | 57 | 73 | 136 | |
| Hex. Bushing | 3000# | 7 | 7 | 9 | 13 | 18 | 42 | 44 | 136 | |
| Flush Bushing |
3000# | 4 | 4 | 7 | 9 | 15 | 33 | 37 | 132 |
Nickel 201 Forged Fittings Types and Standards
- Nickel 201 Socket Weld Elbow
- Nickel 201 Socket Weld Tee
- Nickel 201 Socket Weld Cross
- Nickel 201 Socket Weld Coupling
- Nickel 201 Socket Weld End Cap
- Nickel 201 Socket Weld Union
- Nickel 201 Socket Weld Reducer Insert
- Nickel 201 Socket Weld Boss
- Nickel 201 Socket Weld Branch Outlet
- Nickel 201 Socket weld Reducers
- Nickel 201 Socket Weld Nipple
- Nickel 201 Socket Weld Adapters
- Nickel 201 Threaded Elbow
- Nickel 201 Threaded Tee
- Nickel 201 Threaded Cross
- Nickel 2011 Threaded Coupling
- Nickel 201 Threaded Reducing Coupling
- Nickel 201 Threaded Pipe Cap
- Nickel 201 Threaded Bushing
- Nickel 201 Threaded Plug
- Nickel 201 Threaded Union
- Nickel 201 Threaded Nipple
- Nickel 201 Threaded Boss
- Nickel 201 Threaded Adapter
Note: Prices are based on product, material grade, and quantity. Contact us anytime to get full quotation.
Nickel Alloy 201 Threaded and Socket Weld Fittings – Applications & Industries
Oil & Gas Industries
Gas Processing Industries
Food Processing Industries
Petrochemical Industries
Chemical Industries
Power Generation Industries
Sugar Industries
Fertilizers Industries
We are leading Manufacturers, Exporters, and Suppliers of high quality Nickel 201 High Pressure Forged Fittings. We supply ANSI 16.11 Alloy 201 Threaded Fittings to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.
Ready Stock of Nickel 201 Forged Fittings Export to
Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
Europe,Albania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City
AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, El Salvador, Grenada, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Trinidad and Tobago, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela
Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu
Please send us the complete details of Nickel Alloy 201 Forged Threaded Fittings requirement. We are offering Nickel 201 Socket weld Elbow, and Alloy 201 Socket weld Tee which are accurately designed to provide satisfaction to our customers. We are assisted by a team of skilled professionals, who support us in all our career activities right from a realization of raw material to testing and final dispatch of these Nickel 201 Forged Elbow, Tee, Reducer Insert, Cross, Coupling, Union, Boss, Bushing, Plug, Nipple, Adapter at our valuable customers end. Buy Nickel Alloy 201 Forged Fittings at a cheap price from us.
sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us