sales@metalfed.com
+91 9137898594

0
was successfully added to your cart.

HomeStainless Steel Filler Wire SuppliersStainless Steel ER- 320/320LR Filler Wire Supplier

Stainless Steel ER- 320/320LR Filler Wire Supplier

SS ER-320 Filler Wire, SS 320LR TIG Filler Wires, SS ER-320 Welding Wire, AWS A5.9 Stainless Steel ER 320/320LR Welding Wire Manufacturer in India

Stainless Steel ER-320/ER-320LR Filler Wire Suppliers in India

A large number of joining processes are available for stainless steels, with welding being by far the most widespread. The ease of welding is highly dependent on the type of stainless steel used. ER-320 Stainless Steel Filler Wires are the easiest to arc weld, with similar welding properties to the base metal (not cold worked). Stainless Steel UNS S32000 Filler Wires can also be arc welded, but since the heat-affected zone (HAZ) and fused zone (ZF) form martensite on cooling, precautions must be taken to prevent cracking of the ER-320LR Stainless Steel Welding Wires to weld.

We as Metalfed Engineering are a known exporter and stockist of SS ER-320 Filler Wires / SS ER-320LR Filler Wires, which have long been used in contact with water due to their excellent corrosion resistance. Improper welding procedures can also cause sugar (oxide layer) and/or heat spots on the back of the weld. This can be avoided by using backflush gases, backing plates and fluxes. During preheating before welding, post-weld heat treatment is almost always required in some cases. Thanks to its low reflectivity, stainless steel is used as a canopy material at airports to prevent pilots from being blinded. It is also used for its ability to keep the roof surface close to room temperature. Stainless steel is used for pedestrian and road bridges in the form of tubes, plates or rebar.

Top demanding products in Metalfed is Industrial Flanges, Buttweld Fittings, Socket Weld Fittings, Threaded Fittings

Exporter of Austenitic Stainless Steel ER-320LR Filler Wires, 320 Stainless Steel Filler Wire, AISI 320LR Filler Wire, SS 320 Welding Filler Wire, ER 320LR TIG MIG Filler Wire, ER-320/ER-320LR Stainless Steel Industrial Filler Wire, Stainless Steel 320LR Wire in all Sizes and Diameters.

Table of Content

Stainless steel 320LR filler wire metal has a number of advantages as compare to other metals because of its unique chemical composition,
but it also comes with some considerations that are important for welders to be aware of.

ER-320/320LR Stainless Steel Filler Wire Benefits

  • SS 320 Filler Wire has toughnesat cryogenic temperatures.
  • Good corrosion resistance of ER 320LR Filler wire due to the 10–30 percent chromium.
  • 320 Stainless Steel Welding Filler Wire have strength at high temperatures.
  • ER 320LR TIG Filler Wire available in a variety of electrode types for flux-cored, gas-tungsten, shielded-metal, and gas-metal arc welding.
  • Stainless Steel 320 Filler Wire ability to join difficult to weld steels and dissimilar metals like carbon to stainless.
ER 320LR Filler Wire Considerations

  • Stainless steel 320 filler metal is 3–5 times much expensive as compare to carbon steel .
  • Root openings or gaps need to be, at a minimum, equal to the diameter of the electrode.
  • 320LR Filler Wire requires pre-weld cleaning to ensure corrosion resistance.
  • Generally SS 320LR TIG Filler Wire has a higher coefficient of thermal expansion as compare to carbon steel; holding dimensional tolerances can
    be challenging.
  • 320LR Stainless Steel Filler Wire post-weld cleaning is necessary to ensure properly formed chromium oxide film on surface.

Stockholder of of SS AWS 320 Filler Wire, ER320LR TIG Welding Wire, ER320LR MIG Welding Wire, SS UNS N08022 Filler Wire, Austenitic Stainless Steel ER 320/320LR Filler Wires, ER-320LR Flux Cored Arc Welding Wire, SS AWS CLASS ER-320LR Filler Wireat Best Prices in India.

Stainless Steel ER-320 / 320LR Filler Wire Specifications
Product Name: SS320/ 320LR Filler Wire
Materials : ER320LR Stainless Steel
Classification : AWS A5.9 ER-320LR, A5.9M:2006
Soft Wire Diameter Range : 0.06mm – 2.30 mm
Hard Wire Diameter Range : 0.30mm – 3.00mm
Diameter : 035”, .045”, 1/16”, 3/32”, 1/8”, 5/32”
Length : 36" (914mm) Customized
Finish: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
Forms: Wires, Filler Wires, Coil Wires, Welding Wires
Test Certificates: Third Party Inspection Report, 100% Radiography Test Report, Raw Materials Certificate, EN 10204/3.1B, etc.
Material Test Certificates (MTC): As per EN 10204 3.1 and EN 10204 3.2, TC certifying NACE MR0103, NACE MR0175
Uses & Applications: Welding
Export Network: Ireland, Oman, Dubai, Indonesia, Egypt, Singapore, Saudi & Arabia, Iran, Ukraine, Canada, USA, Brazil, Spain, Thailand, Korea, India, Peru, etc

ER 320/ ER 320LR TIG Filler Wire Equivalent Grades
STANDARD AWS UNS
SS ER320/320LR A5.9 N08022

SS320/ 320LR Filler Wire Chemical Composition
Weight% C Mn Si Cr Ni S P Cb+Ta Mo Cu
ER 320LR 0.025 max 1.5-2.0 0.15 max 19-21 32-36 0.02 max 0.015 max 8X C min / 0.4 max 2-3 3-4

SS ER-320 / 320LR Filler Wire Mechanical Properties
Material Ultimate Tensile Strength Offset Yield Strength 0.2 % Elongation (%)
psi MPa psi MPa
ER 320LR 86,000 590 57,500 400 35

StainlessSteel 320LR Filler Wire Types
SS 320LR MIG Filler Wire SS 320LR TIG Filler Wire
Stainless Steel ER320LR MIG Filler Wire Stainless Steel ER320LR TIG Filler Wire
SS ER-320/320LR MIG Filler Wire SS ER320LR TIG Filler Wire
AWS A5.9 ER320LR MIG Filler Wire UNS S32080 TIG Filler Wire
UNS S32080 MIG Filler Wire AWS A5.9 ER320LR TIG Filler Wire
SS 1.4576 MIG Filler Wire ER320LR SS TIG Filler Wire
ER320LR SS MIG Filler Wire SS 1.4576 TIG Filler Wire

SS ER320 / ER320LR Filler Wires Price
Stainless Steel ER320 Filler Wire Price List Prices of SS ER320LR Welding Wire
Stainless Steel Welding Wire, MIG TIG Wire ER320, ER320LR $ 1-6 / kg
ER320LR Stainless Steel Welding Wire TIG Wire $ 8-21 / kg
Stainless Steel ER320 Welding Wire $ 2500-3500  / Ton
Stainless Steel Filler Wires ER320LR $ 4-0 / kg

 

GET UPDATED PRICE AND COMPLETE QUOTATION WITHIN AN HOUR sales@metalfed.com

SS ER 320LR Filler Wire – Applications & Industries

We are well-known prestigious Manufacturers, Exporters, and Suppliers of high quality Stainless Steel ER320LR Filler Wire.. We supply ANSI 16.11 SS 320 Filler Wire to customers in various industries including chemical, pharmaceutical, petrochemical, power, engineering and various other industrial applications. Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, Third Party Inspection Report and 100% Radiography Test Report.

Ready Stock of 320LR Stainless Steel Filler Wire Export to

Africa Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cabo Verde, Cameroon, Central African Republic (CAR), Chad, Djibouti, Egypt, Comoros, The Democratic Republic of the Congo, Republic of the Congo, Cote d’Ivoire, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea-Bissau, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mozambique, Namibia, Mali, Mauritania, Mauritius, Morocco, Niger, Nigeria, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe

EuropeAlbania, Finland, France, Ireland, Italy, Andorra, Armenia, Austria, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Georgia, Germany, Denmark, Estonia, Kazakhstan, Kosovo, Greece, Hungary, Iceland, Latvia, Liechtenstein, Azerbaijan, Belarus, Belgium, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Turkey, Ukraine, United Kingdom, Vatican City

AmericaAntigua and Barbuda, Bahamas, Barbados, Belize, Canada, Costa Rica, Cuba, Dominica, Dominican Republic, Guatemala, Haiti, El Salvador, Grenada, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Vincent and the Grenadines, Trinidad and Tobago, Saint Kitts and Nevis, Saint Lucia, United States of America, Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Peru, Suriname, Uruguay, Venezuela

Asia/OceaniaAfghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, Cyprus, Georgia, India, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Laos, Lebanon, Malaysia, Maldives, Mongolia, Myanmar (Burma), Oman, Pakistan, Palestine, Philippines, Qatar, Nepal, North Korea, Russia, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Timor-Leste, Turkey, Turkmenistan, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen, Australia, Fiji, Kiribati, Marshall Islands, Micronesia, Nauru, New Zealand, Palau, Papua New Guinea, Samoa, Solomon Islands, Tonga, Tuvalu, Vanuatu

CONTACT

Please send us the complete details of Stainless Steel ER-320LR Filler Wire requirement. Our offered SS 320 Welding Filler Wire, and SS 320LR Industrial Welding Wire which are accurately designed to provide satisfaction to our customers. Our team of skilled professionals, who support us in all our manufacturing and career activities right from a realization of raw material to testing and final dispatch of these  SS 320LR Wire Mesh, SS 320 TIG Filler Wire at our valuable customers end. Buy Stainless Steel 320LR Welding Wire at a lowest price from us.

sales@metalfed.com | +91 9137898594 | Quotation Form | Reach Us